| Titolo | Tipo | Autore | Anno | Editore | Referenze | Ref. | Pagine | Riassunto 1 | Riassunto 2 | Riassunto 3 |
| $17 million autonomus sub for 1980 ft depths | Article | DMT | 1984 | Ocean Industry, July 84 |
|
|
pg. 117 | Story on the French Stirling powered research | submarine |
|
| 1 Kw Free Piston Stirling Engine linear alternator test | program | Dochat, G.R.;Moynihan, T. | 1980 | IECEC\MTI | SAE#809400 |
|
|
1976 |
|
|
| 1 Kw Solar Stirling Equipment, The |
|
|
1981 |
|
NTIS#N81-27602/4 |
|
|
|
|
|
| 1/4 Horsepower Closed Cycle Solar Hot Air Engine |
|
Farber, E.A.;Prescott, F.L. | 1964 | ASME Meeting Nov 29 1964 | ASME#64-WA/SOL-5 |
|
7p | Principle engine is discussed; design and | construction of engine described; working with a | 5 ft parabolic reflector |
| 100 Watt Stirling Electric Generator. A |
|
Beale, William T. | 1975 | IECEC | #1020 |
|
|
|
|
|
| 100 Watt Stirling-Electric Generator for solar or solid fuel | heat sources | Rankin, C.F. | 1975 | IECEC 10th Conf. Proc. Newark NJ Aug 17-22 | SAE#759152 |
|
1020-1022 |
|
|
|
| 1015 Hour Endurance Test of Philips model 1/4 external | combustion engine. | Schrader, A.R. | 1951 | Naval Eng. Experimentation Station Report | EES Report No. C-3599-A(3) NTIS#AD-494926 Feb 1 |
|
|
|
|
|
| 15 KW Solar Free-Piston Stirling Engine/Alternator | conceptual design | Douchat,George; Chen,H.;Vitale,N. | 1979 | MTI report of May 1979 |
|
|
|
|
|
|
| 1987 Overview of Free-Piston Stirling Technology for Space | Power Applications | Slaby, Jack; Alger, D. | 1987 | NASA Lewis Research Center | SAE#879068 | NASATM-89832 |
|
|
|
|
| 1988 Overview of Free-Piston Stirling Technology for Space | Power at the NASA Lewis Research Center | Slaby, Jack G. | 1988 | NASA |
|
NASATM-100795 |
|
|
|
|
| 1988 Overview of Free-Piston Stirling Technology for Space | Power at NASA LeRC | Slaby, Jack G. | 1988 | NASA Lewis Research Center |
|
NASATM-100798 |
|
|
|
|
| 1993 Update on Results of SPRE Testing at NASA Lewis |
|
Cairelli, J.E.; Geng, S.M.; Wong, W.A. | 1993 | IECEC 28th Proceedings Vol 2 | SAE#93362 |
|
633 |
|
|
|
| 19th Century Engine Refrigerates without CFCs |
|
Cleary, Daniel | 1990 | New Scientist, Sept 1, 1990 n1732 |
|
|
28 |
|
|
|
| 25 KW Solar Thermal Stirling Hydraulic Engine System: | Conceptual Design Final Report | Stirling Technology Co., Richland WA | 1988 | NASA Lewis Research Center | NTIS#DE89003777 | NASACR-180889 | 240p Jan 88 |
|
|
|
| 25KWe Free-Piston Stirling Hydraulic Engine for terrestrial | Solar Thermal Applications | White, Maurice A.;Emigh,J.E... | 1988 | IECEC | SAE#889432 |
|
171- |
|
|
|
| 25Kwe Solar Thermal Stirling Hydraulic Engine System |
|
White, Maurice; Emigh,Grant | 1988 | NASA \STC |
|
NASACR-180889 |
|
|
|
|
| 29% Efficient Solar Energy System feeds 250Kwh daily | into utility grid. |
|
1982 | Machine Design Vol 54, Oct. 21, 1982 |
|
|
|
JPL experiment with solar collector and stirling | engine at Edwards AFB fed a daily average of 250kw | into the Edision utility grid. 1982 23.5 Kw/hr |
| 2-D Oscillating flow analysis in Stirling Engine Heat | Exchangers | Ahn, K.H.;Ibrahim, M.B. | 1991 | NASA | NTIS#91193755 | NASATM-103781 | 9 |
|
|
|
| 30Kw Stirling Engine |
|
Watanabe, T. | 1985 | IECEC 20th Conf. Proc. Aug. 1985 | SAE#859423 |
|
|
|
|
|
| 35 CC Rider Stirling Engine |
|
Ross, A. | 1981 | Model Engineer, Vol 147, No. 3661 July 17 |
|
|
866-869 | also Vol 3663, Aug 21, pp 1008-1011;Vol 147 No. | 3665 Sept 8, pp 1142-1145 |
|
| 3Kw Stirling Powered Generator Set |
|
Berchowitz, David M. Richter M. | 1985 | IECEC 20th Conf. Proc. Aug. 1985 at Miami | SAE#859024 |
|
pp. 3.196-3.202 | Discussion of design and development of a moderate | sized Free-Piston engine and alternator system. |
|
| 4 Cylinder Stirling Engine Computer Program with dynamic | Energy Equations |
|
1983 |
|
NTIS#N8326017/4 |
|
|
|
|
|
| 4-275 Stirling Engine in Underwater Application, The | Paper |
|
1986 |
|
SAE#869134 |
|
|
|
|
|
| 45 Years with Philips, |
|
Philips, F.J. | 1978 | Blandford Press, |
|
|
|
|
|
|
| 4-95 Stirling Engine for Underwater Applications, The |
|
Bratt, C. | 1990 | IECEC 25th Conf .Proc Vol. 5/Kockums Marine AB | SAE#900637 |
|
530-533 |
|
|
|
| 50 Kw Stirling Engine |
|
Wantanabe, T. | 1982 | IECEC 17th Conf. Proceedings | SAE#829300 |
|
|
|
|
|
| 60 Watt Thermo-Mechanical Generator as a main power source | for a major lighthouse | Cooke-Yarborough, E.H.; Spottiswoode, N | 1980 | Proc. 10th IALA Conf. Tokyo |
|
|
|
|
|
|
| 600 Watt Free-Piston Stirling Engine Generator. Final Report |
|
|
1991 | Sunpower Inc, Athens, OH f/DOE | NTIS#DE83004387 | DOER5102471 | 15p |
|
|
|
| 7.3 kWe Raidoisotope Undersea Stirling Engine |
|
Leach, C.E.; Fryer, B.C. | 1968 | IECEC |
|
|
|
|
|
|
| 90 CM3 Inverted Yoke Drive Stirling Engine |
|
Ross, Andrew | 1987 | IECEC AIAA\Ross Engineering | SAE#879212 |
|
pp. 1828-1830 | Discussion on design and testing the 90CC small | Hot Air Engine built by Ross. Improvements over | smaller engines |
| A Watt Portable Generator employing a solar powered | Stirling Engine | Trayser, D.A.; Eibling, J.A. | 1966 | IECEC 2nd Conf. Proc. | SAE#669019 |
|
238-244 | Solar Power, Vol 11, pg 153-159 |
|
|
| A 3 Kw class displacer type Stirling Engine for a | heat pump system |
|
1987 |
|
SAE#879024 |
|
|
|
|
|
| A 50 Watt Portable Generator Employing a Solar Power Stirlin | Engine |
|
1966 | IECEC 23rd Proceedings | SAE#669019 |
|
|
|
|
|
| A Bingham Piston with Rolling Sector Linkage |
|
Fauvel, O.R.;Reader, G.T.;Walker, G. | 1993 | IECEC 28th Conf. Proceedings | SAE#93189 |
|
2.933 | Univ. of Calgary |
|
|
| A Comparison of Cylinder Heat Transfer Expressions based on | Prediction of Gas Spring Hysteresis Loss, Fluid flow... | Kornhauser, A.A.;Smith, J.L. | 1987 | ASME |
|
|
89-96 |
|
|
|
| A Compendium of Solar Dish/Stirling Technology |
|
Stine, W.B. | 1993 | Sandia National Laboratory | SAND93-7026 |
|
|
|
|
|
| A comprehensive review of small solar-powered heat engines |
|
Spencer, L.C. | 1989 | Solar Energy, V43 no4 |
|
|
191-225 | bibliography |
|
|
| A Computer Analysis of Regenerator losses in a Stirling | Cryocooler with Multiple Expansion Stages | Urieli, Israel, Chiang, Tang-Kuo | 1992 | IECEC 27th Proceedings\Ohil Univ. | SAE#929038 |
|
5.109-5.113 |
|
|
|
| A Computer Model of a Stirling Engine using a Two Phase | Component working Fluid | Renfroe, D.A. | 1981 | Texas A&M University, College Park TX |
|
|
|
|
|
|
| A Conceptual Study of the Potential for Automotive Derived | and Free-Piston Stirling Engines in 30-400 Kw..Range FR | Vatsky, A.; Chen, H.S.;Dineen, J. | 1982 | Mechanical Technology Inc f/NASA | NTIS#N83105684 | MTI82TR38 | 118p | NASACR165274 A Conceptual Study of the Potential | for Automotive Dereived and Free-Piston Stirling | Engines in 30-400 Kw Stationary power Appl. F.R. |
| A Contribution to Cleaner Air |
|
Sunpower and W.R. Martini |
|
Sunpower |
|
|
|
get from Brad Ross. It describes the rhombic drive | works and how it can be controlled and applied to | the automobile--video tape |
| A Detailed Study of thhe Operation of the Regenerators of | Both Cold End and Hot End Connected Gamma Type Stirl. Engine | Kentfield, J.A.C. | 1993 | IECEC Proceedings | SAE#93050 |
|
2.651 | Depart. of M.Eng. Univ. of Calgary |
|
|
| A Feasibility Assessment of magnetic bearings for Free- | Piston Stirling Power Converters | Curwen, P.W.;Rao, D.K.;Wilson, D.S. | 1991 | NASA | CR-189135 |
|
|
|
|
|
| A Free-Piston Stirling Engine for small Solar Power Plants |
|
Prast, G., de Jonge, A.K. | 1978 | IECEC Proceedings | SAE#789273 |
|
1826-1829 |
|
|
|
| A Free-Piston Stirling Engine/Linear Alternator controls | and Load Interaction Test Facility | Rauch, Jeffery; Kankam, M.D.;Santiago,W | 1992 | IECEC 27th Proceedings\Sverdrup Tech\NASA Lewis | SAE#929264 |
|
5.309-5.314 |
|
|
|
| A Globally-Implicit Stirling Cycle Simulation |
|
Gedeon, David | 1986 | IECEC 21st Conf. Proceedings Vol 5 | SAE#869121 |
|
550-554 |
|
|
|
| A harmonic Analysis program for Stirling Cycle |
|
Huang, S.C. | 1992 | IECEC 27th Conf. |
|
|
47-52 |
|
|
|
| A History of Hot Air and Caloric Engines |
|
Sier, R. | 1987 | Argus Books Ltd, UK |
|
|
100-101 |
|
|
|
| A Linear Model of a Free-Piston Vuilleumier Machine compared | to experimental Results of a Prototype | Schultz, S.; Thomas, B. | 1992 | IECEC 27th Proceedings\Univ of Dortmund | SAE#929032 |
|
5.75-5.80 |
|
|
|
| A Low Temperature Difference Ringbom Stirling demonstration | engine | Senft, J.R. | 1984 | IECEC 19th Conf. Proceeding | SAE#849126 |
|
|
american Chemical Society, San Francisco Aug 84 |
|
|
| A manual of the steam engine and other prime movers |
|
Rankine, Macquorn | 1908 | Charles Griffin and Co. London |
|
|
|
|
|
|
| A Method of Computerized Design of Stirling Engine with | Beta Configuration and Ericsson Linkage | Abenavoli, R.I.;Sciboni, A.;Kormanski, H | 1993 | IECEC 28th Conf. Proceedings | SAE#93020 |
|
2.765 |
|
|
|
| A multi-simulation model for Stirling and Vuilleumier | Cycle Machines | Sekiya, H.;Yamashita, I. | 1991 | Trans Jpn Soc. Mech Eng. Vol57.,No 542 |
|
|
3590 |
|
|
|
| A new low temperature gas expansion cycle |
|
McMahon, H.O. ; Gifford, W.E. | 1960 | Advances in Cryogenic Engineering. Vol 5 |
|
|
345-372 |
|
|
|
| A new mathematical approach to the Stirling Engine analysis |
|
De Cicco, A. | 1983 | 18th IECEC\University of Rome | SAE#839117 |
|
737 |
|
|
|
| A new second order model for Stirling Machines |
|
De Cicco, R. Locorriere, V. Naso | 1983 | IECEC 18th Proceedings\Univsity. of Rome | SAE#839122 |
|
|
C.M. Bartolini, Univ. of Ancona |
|
|
| A new versatile Stirling energy conversion unit |
|
Meijer, R.J.; Ziph,B. | 1988 | IECEC 17th Conf. Proceedings August | SAE#829298?99 |
|
|
|
|
|
| A novel experimentally validated Stirling Cycle simulation |
|
Rix, D.H. | 1983 | IECEC 18th Proceedings\Univ. of Cambridge, England | SAE#839121 |
|
749 |
|
|
|
| A numerical model for Stirling Cycle Machines |
|
Berchowitz, D.M. | 1980 | Transactions of ASME Vol 102, |
|
|
56-761 |
|
|
|
| A Philips Gas Refrigerating Machine for 20°K Cryogenics |
|
Prast, G. | 1963 | Philps Tech. Review 26, January 1965 |
|
|
1-11 |
|
|
|
| A potentially inexpensive, high performance Stirling Air | Engine |
|
1981 | SAE | SAE#819786 |
|
|
|
|
|
| A Practical Bellows Seals for Stirling Engines |
|
White, Maurice A., Emigh, S.G. | 1987 | SAE Int Congress and Exposition, Detroit MI | SAE#869130 |
|
|
Feb 23, 1987 | SAE#870104? |
|
| A Proposal for a heat powered non-rotating electrical | alternator | Cooke-Yarborough, E.H. | 1967 | Harwell Atomic Energy Research Establishment | AERE-M1881 |
|
|
|
|
|
| A Review of Solar Driven Stirling Engines |
|
Fauvel, O.R.;Walker, G.;Reader, G.T. | 1989 | 15th Annual Conf. Solar Energy Cos. of Canada |
|
|
405-411 | given at Penticton, B.C. June 1989 |
|
|
| A review of test results on solar thermal power modules with | dish-mounted Stirling and Brayton Cycle engines | Jaffe, Leonard D. | 1988 | Journal of Solar Energy Engineering Vol 110 |
|
|
268-74 |
|
|
|
| A revised Isothermal Analysis Program for Stirling Engines |
|
|
1983 | SAE | SAE#839120 |
|
|
|
|
|
| A Rhombic Drive Stirling Engine |
|
Ross, A. | 1976 | Model Engineer, Vol 142, No. 3542, August 6 |
|
|
760-762 | aksi Vol 142, no.3543 Aug 20, Dwgs Vol 144 No. | 3598 Dec. 1, 1978. pg 1424-25 |
|
| A Ringbom-Stirling Air Engine-Comparison of digital | simulation and operating experience | Srinivasan, V., Walker, G. | 1983 | IECEC 18th Proceedings, Orlando, FL | SAE# |
|
|
|
|
|
| A Rising Technology, Dish-Stirling Systems |
|
|
1989 | Sandia National Laboratories | SAND89-2734 |
|
|
Brochure describing Solar Dish Systems and | Stirling Engines |
|
| A Second Stirling Engine Development Team. U.S. Government |
|
|
1977 | Commerce Business Daily\NASA | Issue #PSA-6921, Sept 29 |
|
|
|
|
|
| A Shaft Power producing combustor for Stirling Engines |
|
|
1986 | IECEC 21st Conf. Proc. | SAE#869128 |
|
|
|
|
|
| A simple derivation of the generalized Beale number |
|
Senft, James | 1982 | IECEC 17th Conf. Proceedings, Los Angeles, Aug 82 | SAE#829272 duplicate number |
|
|
August 1982 |
|
|
| A Simple Method of calculating Stirling Engines for Engine | design optimization | Martini, William R. | 1978 | IECEC Record |
|
|
1753-1762 |
|
|
|
| A simple Stirling Engine for classroom use |
|
Ross, Brad A. | 1981 | Brigham Young University | SAE#819789 |
|
149 pps | D SC. Thesis |
|
|
| A Simple Two Cylinder(Gamma) Stirling Engine with the power | Cylinder connected to the Heated End of the Displacer Cly. | Kentfield, J.A.C. | 1993 | Univ. of Reading, Dept. of Engineering |
|
|
|
Proc. of 4th Int. Small Engines Conf. Thailand. |
|
|
| A Simplified Sibling Machine |
|
Mitchell, M.P. | 1989 | IECEC 24th Proceedings |
|
|
2289-2292 |
|
|
|
| A simplistic model of cyclic heat transfer phenomena in | closed spaces |
|
1983 |
|
SAE#839115 |
|
|
|
|
|
| A Simplistic Model of Cyclic Heat transfer Phenomena in | Closed Spaces | Lee, K.P. | 1983 | IECEC 18th Conf. Proc. | SAE#839116 check number |
|
720-723 |
|
|
|
| A Simulation Model for Vuilleumier Cycle Machines and | Analysis of Characteristics(in Japanese) | Sekiya, H.;Terada, F. | 1991 | Trans. Jpn Soc. Mech Eng. Vol 57, No. 539 |
|
|
2449 |
|
|
|
| A Small Free-Piston Stirling Refrigerator |
|
Jonge, A.K. | 1979 | IECEC 14th Conf. Proc. /Philips Research Lab | SAE#799245 |
|
|
|
|
|
| A Solar Ringbom Stirling Engine |
|
Senft, James R. | 1986 | IECEC Proceedings | SAE#869112 |
|
|
|
|
|
| A space State Analysis of a Symmetrical Compounded Free- | Piston Stirling Engine | Goldberg, Louis f. | 1980 | IECEC | SAE#809450 |
|
|
|
|
|
| A Stirling Engine approach to an Implantable Nuclear Heart | Assist |
|
1973 | SAE | SAE#739137 |
|
|
|
|
|
| A Stirling Engine Heat Pump System |
|
Hermans, M.L., Asselman, G.A.A. | 1978 | IECEC Proceedings | SAE#789274 |
|
1830-1833 |
|
|
|
| A Stirling Engine in every car? |
|
|
1989 | Machine Design |
|
|
|
|
|
|
| A Stirling Engine with a liquid working substance |
|
Swift, G.W. | 1989 | Journal of Applied Physics, Vol 65 June 1,89 |
|
|
4157-72 |
|
|
|
| A Study on an Air-Water Stirling Engine |
|
|
1983 | SAE | SAE#839136 |
|
|
|
|
|
| A Study on Optimal Design of Stirling Engine MAC-02 |
|
Abenavoli, Impero et al |
|
to be published |
|
|
|
|
|
|
| A Study on Two-Phase Two Component Stirling Engine |
|
Hirata, M.;Iwasaki, E. | 1982 | IECEC 17th Conf. Proc. Los Angles |
|
|
|
ASME |
|
|
| A Survey of Dynamic Power systems for Underwater application |
|
Guthrie, J.A.S. | 1973 | UEGZ(london) Report UR4, 1973 |
|
|
|
|
|
|
| A Survey of Oscillating flow in Stirling Engine heat | Exchangers | Simon, T.;Seume, J.R. | 1988 | NASA | CR-1882108 |
|
|
|
|
|
| A Survey of Propulsion Systems for Low Emission Urban | Vehicles | Fraize, W.E.;Lay, R.K. | 1970 | ASME Paper | ASME Paper No. 70 Trans 49 |
|
|
|
|
|
| A Technology Evaluation of the Stirling Engine for | Stationary Power generation in the 500-2000 HP range | Hoagland, L.C.; Percival, W.H. | 1978 | IECEC 13th Conf. Proceedings/Amtec. Inc./DOE | SAE#789355 | DOE#ORO/5392-01 |
|
DOE Division of Power systems | Contract EC-77-C-05-5392 |
|
| A theoretical investigation of the Hot-Air Engine |
|
Vaum, Howard Thomas | 1949 | Univ, of California, Berkeley | Call No. T7.5 .V377 |
|
|
|
|
|
| A Thermally Actuated Heat Pump |
|
Eder, F.X. | 1982 | International Journal of Refrigeration Vol 5, No.2 |
|
|
87-90 |
|
|
|
| A Third Order Model of Stirling Engines |
|
De Cicco, A., Locorriere, R. | 1982 | Univ. of Rome/Univ. of Ancona, Technical Note |
|
|
|
|
|
|
| A Thumb Nail sketch of the gas processes in the Stirling | Cycle Machine | Organ, A.J. | 1992 | Proc. of the Inst. of Mech. Engrs. Vol 206 No. 4 | Part C |
|
239-48 |
|
|
|
| A User Friendly graphics Oriented Martini Stirling Engine | simulation Program | Weiss, M.H.; Fauvel, O.R. | 1986 | 3rd Int. Stirling Engine Conf. Rome Italy |
|
|
|
June 1986 |
|
|
| A user oriented design system for Stirling Engines |
|
|
1982 |
|
SAE#829277 check number |
|
|
|
|
|
| A Variable Angle Wobble Plate Drive for a Stroke Controlled | Stirling | Meijer, R.J.; Ziph,B; | 1979 | IECEC 14th Conf. Proceedings August |
|
|
|
|
|
|
| A Wax Pattern Die for a Finned Stirling Engine Heater |
|
Ross, Andrew | 1978 | Model Engineer, Vol. 144, No. 3587 June 16 |
|
|
697-703 |
|
|
|
| A way to relax dimensional tolerance requirements for | clearance regeneration | Cooke-Yarborough, E.H. | 1982 | IECEC 17th Conf. Proceedings |
|
|
1835-1837 |
|
|
|
| A way to relax the dimensional tolerance requirements of | clearance regenerators |
|
1982 |
|
SAE#829303 |
|
|
|
|
|
| Accomplished Stirling Engines |
|
MTI | 1988 | NASA Tech Briefs |
|
|
pp. 14-15 |
|
|
|
| Account of life of John Ericsson | in Scribner's Magazine | Church, William Conant | 1890 | Scribner's Magazine Vol 7 |
|
|
169 | an interesting account of the life of this great | engineer |
|
| Action of Heat engines as explained by molecular theory |
|
Hele-Shaw, H.S. (M.I.C.R.) | 1891 | Iron magazine, May 1, 1891 |
|
|
383-85 | Address to the Liverpool Polytechnic. Soc. | May 1, 1891 |
|
| Adaptive Regulation System for a Linear Alternator driven | by a Free Piston Stirling Engine | Redlich. R.W. | 1987 | U.S. Patent Feb 10,1985 | 4642547 Feb 10, 1985 |
|
|
|
|
|
| Advanced Automotive concepts |
|
Meijer, R.J. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg. Troy, MI,May |
|
|
|
|
|
|
| Advanced development of Stirling Engines as MAN\MWM |
|
Zacharias, F.A. | 1974 | 2nd Symp. on Low Pollution Power syst. Dev. |
|
|
|
held in Dusseldorf, Sept |
|
|
| Advanced Developments in Stirling Machines |
|
Daniels, A. | 1978 | Inst of Gas Technology Seminar |
|
|
|
Seminar on Stirling Cycle Prime Movers, Chicago | Ill., June |
|
| Advanced Heat Source development for static and dynamic | radioisotope space power system | Schumann, F.A.; Osmeyer, W.E. | 1975 | IECEC 10th Conf. Proc. Newark, NJ |
|
|
911-915 |
|
|
|
| Advanced High Temperature Materials for the Energy Efficient | Automotive Stirling Engine | Titran, R.H. | 1984 | Journal of Materials for Energy Systems | Vol 6, No. 2 1984 |
|
|
|
|
|
| Advanced High Temperature Materials for the Energy Efficient | Automotive Stirling Engine | Titran, R.H.; Stephen, J.R. | 1984 | NASA Lewis Research Center f/DOE | NTIS#DE84015498 | NASATM-83659 | 20p | Paper at Future energy systems conference Wash DC | 1 May 84 |
|
| Advanced Locomotive Heat Engines |
|
Daley, J.G.; Kirsch, L.W. | 1982 | Argonne National Laboratory f/DOE | NTIS#DE83010695 | CONF82041261 | 28p | paper for ASME/IEEE Joint Spring Conf Erie PA | 19 Aug 1982 |
|
| Advanced Propulsion System concept for Hybrid Vehicles |
|
Bhate, S.; Chen, H. | 1980 | Mechanical Technology Inc for DOE | NTIS#DOENASA0092801 | NASACR-159772 | 168p | NTIS#DOE/NASA/0092-80/2E/ |
|
|
| Advanced Propulsion system for Hybrid Vehicles |
|
|
1981 |
|
NTIS#N81-18935/9 |
|
|
|
|
|
| Advanced Rotary Heat Engine with improved Volume | Displacement | Whitestone, B.G. | 1987 | IECEC AIAA | SAE#87---- |
|
|
|
|
|
| Advanced sliding seal development |
|
Waterman, A. | 1978 | DOE Hwy Veh. Syst. Cont. Coord. Mtg., Troy, MI May |
|
|
|
|
|
|
| Advanced Solar Concentrator developments in United States |
|
Alpert, D.J. | 1990 | Sandia Laboratories f/DOE | NTIS#DE91005143 | SAND902490C | 28 | Seminar on Solar Power Systems at Yalta, May 90 |
|
|
| Advanced solar receiver conceptual design study | Paper |
|
1987 |
|
SAE#879221 |
|
|
|
|
|
| Advanced Space Solar Dynamic Power Systems beyond IOC Space | Station |
|
1987 |
|
SAE#879166 |
|
|
|
|
|
| Advanced Space Solar Dynamic Receivers | Paper |
|
1988 |
|
SAE#889168 |
|
|
|
|
|
| Advanced Stirling Conversion System for Terrestrial | Applications | Shaltens, Richard K. | 1987 | 1987 Solar Energy Conf, Honolulu Mar.87 | NTIS#N8715031/4 | NASATM-88897 |
|
also 1986 DOE/NASA/33408-1 |
|
|
| Advanced Stirling Conversion System Preliminary Design | Report | Ross, B.A.; Noble, J.E.; Emigh, M.A. | 1990 | Stirling Technology Company f/DOE | DOE/NASA/0377-1 Dec 90 | NASACR-155201 |
|
Wallace Riggle; L.B. Penswick |
|
|
| Advanced Stirling Engine for Space Power, The |
|
Welsh, H.W.; Poste, E.A.; Wright, R.B. | 1959 | ARS Paper, November |
|
|
|
|
|
|
| Advancements in automotive Stirling Engine development |
|
Corey, John; Meacher, John | 1985 | IECEC 20th Conf. Proc. Aug 18-23 | SAE#959025 |
|
|
|
|
|
| Advances in Stirling Engine Technology |
|
Senft, Dr. James R. | 1979 | IECEC 14th Proc. Proceedings | SAE#799252 |
|
pp. 1175-1179 |
|
|
|
| AFWAL Terrestrial Stirling engine R&D efforts |
|
|
1983 | SAE | SAE#839130 |
|
|
|
|
|
| Aim, Design, Construction and Testing of the Autonomous | Stirling Liquid-Oxygen Power plant for Swedish submarines | Johansson, B.;Nilsson, H. | 0 |
|
|
|
|
|
|
|
| Air Conditioning cold from any heat source |
|
Lindsley, E.F. | 1975 | Popular Science |
|
|
pp. 60-61 |
|
|
|
| Air Engine |
|
|
1957 | Encyclopedia Britannica |
|
|
|
|
|
|
| Air Engines |
|
Finkelstein, Theodore | 1959 | The Engineer, Vols 207 n5383,5384,5385 Mar 27,1959 | from four issues |
|
522-527 | Development of a furnace hot air engine believed | that this is the first time a comprehensive set | of illustrations assembled |
| Air Engines |
|
Benjamin Park | 1892 | Modern Mechinisms, |
|
|
255-256 | Short section describing the newly installed | Ticonderoga Machine co. engines. Same engine | described in Power and Steam front page article |
| Air Engines |
|
Rinia, H.;DuPre, F.K. | 1946 | Philips Technical Review, Vol. 8 No. 5, May 1946 |
|
|
129-160 | Research has shown that satisfactory results can b | be attained with air engines if built in accord | with modern conceptions of heat transfer. |
| Air Independent power systems for Autonomous Submarines | (description Sub Power, Malmo Sweden system) | Nilsson, Herbert | 1985 | Proceedings Oceans '85 | November 85, San Diego, CA |
|
|
Story on the French SAGA1 submarine powered by | Stirling engines |
|
| Air Independent Stirling Engine powered energy supply | system for underwater applications | Nilsson, H.;Gummesson, S. | 0 | Transactions of Inst. of Marine Engineer V100 | Vol 100 |
|
227-239 |
|
|
|
| Alkali Metal Compatability Testing of Candidate Heater Head | Materials for a Stirling Engine Heat Transport System | Noble, Jack E.; Hickman, Gary L.; | 1991 | IECEC 26th Conf. Proc. Vol 6\Stirling Engine Co. | SAE#910436 |
|
166-170 | Describes work done on a 25 Kw advanced Stirling | conversion system Project. study of compatibility | of Stirling head and liquid metals at High temp. |
| Alkali Metal Pool Boiler Life Tests for a 25 KWe Advanced | Stirling Conversion System | Anderson,W.G.;Rosenfeld, J.H.;Noble,J. | 1991 | IECEC 26th Conf. Proceedings Vol 5 1991 | SAE#910837 |
|
343-348 | Boston |
|
|
| Allison adapting Stirling Engine to 1-year-Space-Operation |
|
H. W. Welsh, D.S. Monson | 1962 | SAE JOURNAL, Vol 70 |
|
|
44-51 |
|
|
|
| Alloy Chemistry and Microstructure Control to meet the de- | mands of the Atuomotive Stirling Engine |
|
|
|
N86-20541/6 |
|
|
632717 |
|
|
| Alloys for Stirling Engines |
|
Cronin, Micheal J.;Skog, Eric | 1985 | Metal Progress, Vol. 127, Feb 85 |
|
|
39-41 |
|
|
|
| Alternate Engines |
|
|
1975 | Los Angeles Times, Sept 4 |
|
|
|
|
|
|
| Alternate Fuels Alternate Prime Movers in non-highway | transportation | Percival, P.;Eldred N.C. | 1979 | SAE | SAE#790957 |
|
|
|
|
|
| Alternative automotive power plants |
|
|
1975 | Auto. Engineer Vol 83 |
|
|
18-23 |
|
|
|
| Alternative Power Sources for low emission automobiles |
|
Bjerklie, J.W. | 1975 | Auto. Engineer Vol 83 |
|
|
|
|
|
|
| Alternative Powerplants |
|
Brogan, J.J. | 1973 | SAE Special Publication , July | SAE#730519, SP-383 |
|
31-36 |
|
|
|
| Alternative powerplants and energy conservation |
|
|
1976 | Auto. Engineer Vol. 84, No. 3 March |
|
|
|
|
|
|
| Amazing Hot Gas engine powers Clean Air Bus | Article | Scott, David | 1971 | Popular Science, June 71 |
|
|
pp.54-56 | Story of Phillip's Stirling engine in a bus | drawings and photos |
|
| Amazing No-fuel 'space' engine you can build |
|
Walton, Harry | 1965 | Popular Science, Vol. 176 July |
|
|
106-110 |
|
|
|
| An Adiabatic approach for the design and the response to | load evaluation of Free-Piston Stirling Engines | Benvenuto, Giovanni, Filippo de Monte | 1992 | IECEC 27th Proceedings\Univ of Genova | SAE#929066 |
|
5.23-5.31 |
|
|
|
| An Advanced 15 KW Solar Powered Free Piston Stirling engine |
|
|
1980 | SAE | SAE#809414 |
|
|
|
|
|
| An algorithm for the preliminary design of Stirling Engine | Heaters | Reader, G.T.; Taylor, R. | 1980 | IECEC Conf. Proc. | SAE#809339 |
|
|
|
|
|
| An analysis of likely economic effects of commercialization | of alternative automobile engines | Hill, Lawrence G. | 1978 | Argonne National Laboratory \Lewis University | ANL/CNSV-TM;9 |
|
36 ppgs |
|
|
|
| An analysis of pressure drops under reversing flow condition |
|
|
1986 | SAE | SAE#869116 |
|
|
|
|
|
| An Analysis of the Stirling Cycle Refrigerator |
|
Rios, P.A.; Qvale,E.B.; Smith, J.L. | 1968 | Cryogenic Engineering Conference |
|
|
332-342 |
|
|
|
| An Analytical and Experimental Evaluation of the pressure | drop losses in the Stirling Cycle | Rios, P.A.;Smith, J.L. | 1969 | ASME Paper Vol 92, Ser. A., No. 2 April | Paper No. 69-WA/Ener-8 |
|
|
|
|
|
| An analytical and experimental investigation of pulse tube | refrigeration | Longsworth, R.C. | 1966 | Ph. D. Thesis, Syracuse Univ. June |
|
|
|
|
|
|
| An Analytical and Experimental Investigation of the Stirling | Cycle | Rios, P.A.; Smith, J.L.; Qvale, E.G. | 1969 | Advances in Cryogenic Engineering, Plenum Press NY | Vol. 14 |
|
|
also listed as Rios MIT Ph D Thesis(1969) |
|
|
| An analytical and experimental investigation of the Stirling | Cycle | Rios, P.A. | 1969 | MIT, Boston, MA 1969 | D.Sc. thesis |
|
|
|
|
|
| An analytical and experimental study of flow friction | characteristics of periodically reversing flow | Kim, J.C. | 1973 | ASME Paper | No. 73-WA/FE-13 |
|
1-8 |
|
|
|
| An analytical and experimental study of heat transfer and | flow friction char. for periodically reversing flow... | Kim, J.C. | 1970 | Ph.D. Thesis, Purdue Univ. |
|
|
|
An analytical and exper. study of heat transfer | flow friction char. for periodically reversing | flow through porous matrix of thermal regenerators |
| An Analytical Model of Stirling type Engines |
|
Qvale,E.B. | 1963 | D.Sc. Thesis, MIT |
|
|
|
|
|
|
| An analytical solution for a Stirling Machine with an | adiabatic cylinder | West, Colin D. | 1980 | IECEC 15th Conf. Proceedings, August | SAE#809453 |
|
|
|
|
|
| An Apparatus for Measurement of In-Cylinder Heat Transfer | with Inflow-Produced Turbulence | Kafka, Bryan; Kornhauser, Alan A. | 1003 | IECEC 28th Proceedings | SAE#93198 |
|
2.759 | Kafka-Virginia Polytechnic Inst | Kornhauser-State University, Blacksburg, VA |
|
| An application of Thermal regenerators to the production of | very low temperatures | Fleming, R.B. | 1962 | D.Sc. Thesis MIT |
|
|
|
|
|
|
| An approach to the Design of Stirling Engine regenerator | Matrix using packs of wire gauzes | Miyabe, H.;Takahashi,S.;Hamaguchi, K. | 1982 | IECEC 17th Conf. Proceedings | SAE#829306? check number |
|
1829-1844 |
|
|
|
| An approximate solution for the Thermal Performance of a | Stirling Engine regenerator | Quale, E.G.; Smith, J.L. | 1969 | ASME Jnl. of Eng. for Power Vol 91 Series A,No.2 |
|
|
109-112 | April 69 |
|
|
| An Approximate solution to the shuttle heat-transfer losses | in a reciprocating machine | Rios, P.A. | 1971 | Journal of Engineering Power(ASME) Vol. 93 |
|
|
177-182 |
|
|
|
| An assessment of alternative conventional submarine | power plants | Reader, G.T.; Dathan, T. | 1988 | IECEC Conf. Proc./Royal Naval Engineering College | SAE#889433 |
|
|
|
|
|
| An assessment of the concept of a Stirling powered torpedo |
|
|
1986 |
|
SAE#869133 |
|
|
Description of work on the Stirling torpedo by | General Motors |
|
| An assessment of the multifuel capacity and alternative fuel | potential of the Automotive Stirling Engine |
|
1982 |
|
SAE#829285 |
|
|
|
|
|
| An Assessment of the performance of the first and second | experimental vers. of the Harwell Thermo-Mech. Generator | Cooke-Yarborough, E.H.; Franklin, E. | 1973 | Harwell Atomic Energy Research Establishment | Harwell Report#7265 |
|
|
|
|
|
| An assessment of the suitability of induction generator for | use with the Thermo-Mech. Generator Stirling Cycle Engine | Franklin, E. | 1970 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2220 |
|
|
|
|
|
| An efficient Stirling Heat Engine-Heat Pump |
|
Martini, W.R. | 1975 | IECEC 10th Conf. Proc. Newark, NJ | SAE#7506130 check number |
|
|
|
|
|
| An Electrical Analog to the Heat Regenerator |
|
Tipler, W. | 1948 | Proc. Int. Cong. of Appl. Mech. Vol. 3 |
|
|
196-210 |
|
|
|
| An experimental determination of the dynamics of a free | displacer of a small Ringbom-Stirling Engine |
|
1983 | SAE | SAE#839135 |
|
|
|
|
|
| An experimental free displacer back-to-back Gamma type | Stirling Engine | Lazarides, Y.G., Rallis, C.J.,Lewis, K. | 1983 | IECEC 18th Proceedings\Univ. of Witwatersrand, SA | SAE#839147 |
|
902- |
|
|
|
| An Experimental Investigation of a Stirling Engine |
|
Shuttleworth, R. | 1958 | M.Sc. Thesis, Durham Univ. UK |
|
|
|
|
|
|
| An Implantable Artificial Heart power source |
|
Lance, J.R.; Selz, A. | 1968 | IECEC 3rd Conf. Proc. Boulder, CO Aug 14-16 |
|
|
|
|
|
|
| An Implantable Artificial Heart |
|
Buck, K.E. | 1969 | Mechanical Engineering, Sept |
|
|
20-25 |
|
|
|
| An Implantable thermal converter as power source for an | artificial heart | von Reth, R.D.; Frank, G. Keller, H. | 1974 | IECEC 9th Conf. Proc., San Francisco, CA |
|
|
|
|
|
|
| An implantable Thermal Converter as Power Source for an | Artificial Heart |
|
1974 | IECEC | SAE#749115 |
|
|
|
|
|
| An Improved Stirling Engine for Model Aircraft Propulsion |
|
McConaghy, Rob | 1987 | IECEC AIAA Aug 1987 | SAE#879213 |
|
pp. 1831-1834 | Discussion of a Stirling engine for model air | planes. Problems encountered and solutions |
|
| An Industrial Gas Refrigerating Machine with Hydraulic | Piston Drive | Dros, A.A. | 1965 | Philips Technical Review | Vol. 26, No. 10 1965 |
|
|
|
|
|
| An Initial Model for the Finite Displacement Response | Characteristics of a Fluidyne Pump | Drzewiecki, T.M. | 1979 |
|
HDL-TR-1868 Feb. 1979 |
|
|
|
|
|
| An Innovative Dish/Stirling system |
|
Keck,T.;Schiel,W. | 1990 | IECEC 25th Conf. Proceedings |
|
90-6-317 |
|
|
|
|
| An Integrated Stirling Engine and Heat Pump with only two | moving assemblies | Cooke-Yarborough | 1976 | Harwell Research Center | AERE-R8468 Aug 1976 |
|
|
|
|
|
| An International survey of Parabolic Dish/Stirling Engine | Electrical Power Generation Technology | Stine, W.B. | 1993 | ASME/ASES Int. solar Energy Conference, Wash. DC |
|
|
|
|
|
|
| An Introduction to Stirling Engines |
|
Senft, James R. | 1993 | Moriya Press, River Falls Printing Co. | 112 East Walnut, River Falls Wisconsin |
|
|
|
|
|
| An introduction to the Ringbom Stirling Engine |
|
Senft, Dr. James R. | 1989 | New Machine Co., Kirkland, WA |
|
|
|
|
|
|
| An investigation into a means of appraching Isothermal | Processes Applicable in Stirling Cycle Machines | Koenig, K. | 1966 | Massacheusetts Institute of Technology MSc Thesis |
|
|
|
|
|
|
| An Investigation into a Means of Approaching Isothermal | processes applicable to Stirling Cycle Machines | Koenig, K., | 1966 | MIT Cambridge Mass | Master of Science Thesis |
|
|
|
|
|
| An investigation into the effect of various regenerators | on the performance of a Stirling Engine |
|
1986 |
|
SAE#869115 |
|
|
|
|
|
| An Investigation into the Feasibility of 1 MW Ringbom-Stiri- | ing and Martini-Stirling Engines | Horstead, P.J. | 1983 | Royal Naval Engineering College | RNEC-TR-83002 |
|
|
|
|
|
| An investigation of oscillating flow in tubes |
|
Taylor, D.R.; Aghili, H.; | 1984 | Royal Naval Engineering College | SAE#849176 |
|
|
|
|
|
| An investigation of some of the theoretic and experimental | aspects of the Stirling Engine | Zarinchang, J. | 1972 | Reading University, PhD Thesis |
|
|
|
|
|
|
| An Investigation of the effects of an exhaust gas | recuperator on the performance of a Stirling Engine | Philips, J.B.; Reid, T.J. | 1974 | Univ. of Bath, School of Engineering | Project Report #278 |
|
|
|
|
|
| An investigation of the losses occurring in reciprocating | Hot Air engines | Kirkley, D.W. | 1962 | Ph. D. Thesis, Durham University, UK |
|
|
|
|
|
|
| An investigation to assess the feasibility of a Martini- | Ringbom Stirling Engine | Horstead, P.J. | 1983 | Royal Navy Engineering College | RNEC-TR-83002 | DRIC |
|
MSc disseration |
|
|
| An isothermal second order Stirling Engine calculation | Method | Martini, W.R. | 1979 | IECEC Conf. Proc. |
|
|
|
|
|
|
| An isothermic second order Ringbom-Stirling Engine computer | program |
|
1982 |
|
SAE#829299 |
|
|
|
|
|
| An optimization of the principle design parameters of | Stirling Cycle Machines | Walker, Graham | 1962 | Jour. of Mech. Engineering Science Vol.4 No.3 |
|
|
|
|
|
|
| Analisi Dinamica e Termodinamica di Motori Stirling a Piston | Libero | de Monte, F. | 1993 | University di L'Aquila, Italy |
|
|
|
|
|
|
| Analog Simulation of a Fluidyne Engine |
|
Gosling, M., Boast, D. | 1976 |
|
B.Sc. Research Project No. 382 |
|
|
|
|
|
| Analog simulation of Stirling Engines |
|
Finkelstein, Theodore | 1963 | Simulation, No.2 March |
|
|
|
|
|
|
| Analyses and design of Regenerators for Stirling Cycle | machines | Lazarides, Y.G.; Rallis, C.J.; | 1984 | Univ. of Witwatersrand,. SA | SAE#849246 |
|
|
|
|
|
| Analysis and design of Free-Piston Stirling Engine- | thermodynamics and dynamics | Benson, Glendon M. | 1980 | IECEC 15th Conf. Proceedings | SAE#809334 |
|
|
|
|
|
| Analysis and Design of the Stirling Engine for waste heat | recovery | R. Shoureshi | 1981 | Ph.D. Thesis MIT |
|
|
|
|
|
|
| Analysis and experimental evaluation of the pressure drop | losses in the Stirling Engine | Rios, P.A.(MIT);Smith, J.L. | 1969 | ASME Meeting Nov 16, 1969 | ASME#69-WA/Ener-8 |
|
8 | Analysis of pressure drop in heat exchange | components |
|
| Analysis and test of a Solar Powered Stirling Engine | driving a Linear Alternator |
|
1977 |
|
SAE#779248 |
|
|
|
|
|
| Analysis of a Double Rhombic Drive for a 20 KW Hot Gas | Engine | Mathews, A.D.H. | 1980 | Royal Navy Engineering College |
|
|
|
|
|
|
| Analysis of a Heat Activated Stirling Heat Pump |
|
Finkelstein, T. | 1980 | IECEC 15th Conf. ProceedingsSeattle | SAE#809363 |
|
|
|
|
|
| Analysis of a mechanically simple External Combustion Engine | with an unusual cycle |
|
1987 |
|
NTIS#DE87007788 |
|
|
|
|
|
| Analysis of a thermally actuated Vuilleumier Refrigerator |
|
Colasurdo, Guido; Pastrone, Dario | 1991 | IECEC 26th Conf. Proc./American Nuclear Society |
|
|
256- |
|
|
|
| Analysis of Engineering Cycles |
|
Haywood, R.W. | 0 | Pergmon Press, London | chap. Advanced Refrig. and Gas Liquefaction plants |
|
242-243 |
|
|
|
| Analysis of Free-Oscillating flow in a U shaped tube |
|
Iguchi, M.;Phmi, M.;Maegawa, K. | 1982 | Japanese Society of Mechanical Engineers v25 n207 | Bulletin of JSME |
|
1398-1405 |
|
|
|
| Analysis of Free-Piston Stirling Engine Dynamics |
|
Rauch, J.S. | 1975 | IECEC Conf. Proc. | 961 |
|
|
|
|
|
| Analysis of Intgrated heat Pumps by the "Null Engine" | concept | Finkelstein, Theodore | 1992 | IECEC 27th Proceedings\Stirling Technology Co. | SAE#929497 |
|
5.155-5.160 |
|
|
|
| Analysis of Likely Economic Effects of Commercialization of | Alternative Automobile Engines |
|
1980 | Argonne National Laboratories |
|
ANLCNSVTM-9 |
|
80-91 |
|
|
| Analysis of potential temperature discontinuities in | Stirling cycle Heat Exchanger System | Colosimo, D.D. | 1976 | American Gas Assoc.,May, Project No. HC-81-48 | Dynatech Report 1388 |
|
|
|
|
|
| Analysis of practical reversible thermodynamic cycles |
|
Finkelstein, Theodore | 1964 | ASME Paper Heat Transfer Conf. Cleveland OH | Paper 64-HT-37 |
|
|
|
|
|
| Analysis of Pressure Drops under Reversing Flow conditions |
|
|
1987 |
|
NTIS#DE87001476 |
|
|
720,463 |
|
|
| Analysis of several load systems used on Free-Piston | Stirling Engines. |
|
1987 |
|
SAE#879342 |
|
|
|
|
|
| Analysis of Stirling Engine Performance |
|
Kawajiri, K.;Fujiwara, M.;Suganami, T, | 1989 | IECEC 25th Conf. Proc. Vol 5 |
|
|
2341-2346 |
|
|
|
| Analysis of the brake performance potential of Crossley- | Stirling Engines | Senft, James. R. | 1991 | IECEC 26th Conf. Proceedings, Boston, 1991 | SAE#910314 |
|
286-292 |
|
|
|
| Analysis preliminare del comportamento delle tenute in moto | non convenzionali a ciclo Stirling e a circlo Brayton | Rovetta, A.; Massa E. | 1978 | Inst. of Mechanics of Machines, Polytechnic Milan | Tech. Report 76-77.2 |
|
|
vol 31, N9 1978 |
|
|
| Analysis results for Several Stirling Machines |
|
Kagawa, Noboru | 1993 | IECEC 28th Proceedings | SAE#93053 |
|
2.701 | Dept. of Applied Physics, Nat. Defense Academy | Hashirimizu, Yokosuka, 239 japan |
|
| Analytical and Experimental studies of compact wire screen | heat exchanger | Kim, J.C.; Qvale, E.B. | 1971 | Adv. Cryogenic Eng. Vol 16 |
|
|
302-311 |
|
|
|
| Analytical optimization of specific performance of a | Stirling Cycle Machine. | Organ, A.J. | 1971 | Kings College, University of London |
|
|
|
unpublished note. |
|
|
| Anatomy of the Stirling Engine Cycle |
|
Organ, A.J. | 1993 | Proc. Inst Mech Engineers, Pt.C |
|
|
|
|
|
|
| Andersen and Carlsen try for a Heat Pump |
|
|
1980 | Stirling Engine Newsletter August 80 |
|
|
7 |
|
|
|
| Annual Report(5th) to Congress on the Automotive Technology | Development program |
|
1983 | Department of Energy | NTIS#DE84004097 | DOECE00272 | 22p |
|
|
|
| Annular Heater Head Concept for high Power Stirling Engines |
|
White, M.A.;Emigh, S.G.; Nobel, J.E. | 1987 | IECEC 22nd Conf. Proc. |
|
|
|
|
|
|
| Annular tidal regenerator engine for nuclear circulatory | support systems |
|
1975 | IECEC Conf. Proc. | SAE#759182 |
|
|
|
|
|
| Another French Company will soon announce their work on | Stirling Engines |
|
1980 | Stirling Engine Newsletter, Aug 80 |
|
|
|
|
|
|
| Apparatus for studies of regenerators and heat exchangers | for pulse tube, vuillemier and Stirling type refrigerators | Kim, J.C.;Helmer, W.A. | 1971 | 8th Int. Congress of Refrigeration, Aug. | Paper No. 1:46 |
|
|
|
|
|
| Applicability of Advanced Automobile Heat Engines to | Solar Thermal Power | Beremand, D.G., Evans, D.G. | 1981 | NASA | DOE/NASA/1060-4 | NASATR-81658 |
|
|
|
|
| Applicability of Advanced Automotive heat Engines to Solar | Thermal Power |
|
1981 |
|
NTIS#N81-14397/6 |
|
|
|
|
|
| Application of computer techniques to the general analysis | of the Stirling Cycle, The | Khan, M.I. | 1962 | M. Sc. Thesis Durham, University, UK |
|
|
|
|
|
|
| Application of Non-Linear, State Space Stability Analysis | to Free Piston Stirling Cycle Engine Design | Goldberg, L. | 1983 | IECEC 18th Proceedings\Univ. of Minn, Minneapolis |
|
|
761- |
|
|
|
| Application of the Fluidyne in developing countries |
|
Fauvel, O.R.;Yu, L.;Reader, G.;Walker, G | 1992 | IECEC 27th Proceedings\Univ. of Calgary | SAE#929389 |
|
5.411-5.415 |
|
|
|
| Applications of Free Piston Stirling Engines |
|
Rifkin, W.;Vincent, R.;Benson, Glendon M | 1980 | IECEC Conf. Proc. | SAE#809401 |
|
1882-1886 | Energy Research and Generation Inc. 1982 |
|
|
| Approximate formulae in the theory of Thermal Regenerator |
|
Schultz, B.H. | 1953 | Appl. Scient Res., Vol A, 3 |
|
|
165-173 |
|
|
|
| Approximate solution for Thermal Performance of Stirling | Engine Regenerator | Qvale, E.B.;Smith, J.L. | 1968 | ASME meeting Dec 1-5 1968 | ASME#68-WA/Ener-1 |
|
4p | Closed form solution for thermal performance of | Stirling engine regenerator is derived |
|
| Army development of Stirling Engine generator sets |
|
|
1983 | SAE | SAE#839144 |
|
|
|
|
|
| Article |
|
Sier R. | 1973 | The Model Engineer | No. 3461,3463,3464 |
|
|
|
|
|
| Article |
|
Meijer, R.J. | 1970 | Philips Technical Review |
|
|
pp. 168-185 |
|
|
|
| Article |
|
Meijer, R.J. | 1969 | Ingenieur | 81, No. 18,19 |
|
|
|
|
|
| Article |
|
|
1807 | Nicholson's Journal November 1807 |
|
|
|
|
|
|
| Article-title unknown |
|
|
1843 | Mechanics Magazine, Vol 38, |
|
|
257,263,273 |
|
|
|
| Articulated Diaphrams for Thermo-Mechanical Generators |
|
Cooke-Yarborough, E.H. | 1985 | IECEC 20th Conf. Proc., Miami Beach | SAE#859426 |
|
3.338-3.341 |
|
|
|
| Artificial Heart System thermal converter and blood pump | component research and development | Postma, N.P.;Bifano,N.J.;Hanson,J.P. | 1975 | IECEC 10th Conf. Proc. Newark, NJ Aug 17-22 |
|
|
|
|
|
|
| Artificial Heart thermal converter component research and | development | Lehrfeld, D.;Lagerqvist, R.S. | 1977 | IECEC 12th Conf. Proc. Washington, DC | SAE#779019 |
|
|
|
|
|
| Assessment and Economic Analysis of the Mod III Stirling | Engine driven chiller system: Final Report Oct 89-Jul 90 | Moryl, J. | 1991 | Mechanical Technology Inc., f/Gas Research Inst | NTGIS#PB91109025 | GRI900228 | 77 |
|
|
|
| Assessment of 25kW Free-Piston Stirling Technology | Alternatives for Solar Applications | Erbeznik, R.; White, M.A.;Penswick, B. | 1992 | IECEC 27th Proceedings\Stirling Technology Inc. | SAE#929186 |
|
5.237-5.242 | San Diego, Aug 3-7 92 |
|
|
| Assessment of a 40 Kilowatt Stirling Engine for Underground | mining applications | Cairelli, J.E.; Kelm, G.G.;Slaby, J.G. | 1982 | NASA Lewis Research Center | NTIS#N82307141 | NASATM-82822 | 75p | June 82 | N82-30714/1 |
|
| Assessment of a hard coupled Fluidyne Pump |
|
Hensman, T.W. | 1980 | Royal Naval Engineering College |
|
|
|
|
|
|
| Assessment of Free-Piston Stirling Engines as Heat Pump | Drives |
|
1988 |
|
NTIS#DE85005277 |
|
|
819,188 |
|
|
| Assessment of Magnetic Bearing Concepts for Stirling Space | Engines | Rao, D.K. | 1991 | Mechanical technology Inc. |
|
|
|
|
|
|
| Assessment of selected engine driven heat pumps. Solar | energy heat pump systems for heating and cooling buildings | Wurm, J. | 1975 |
|
SAE#7506130 check number |
|
|
|
|
|
| Assessment of Stirling Engine potential in Total and | Integrated Energy Systems |
|
1980 | Argonne National Laboratories |
|
ANL/ES-76 |
|
|
|
|
| Assessment of the design of the 20KW consortium | Stirling Engine(Paper) |
|
1987 |
|
SAE#879028 |
|
|
|
|
|
| Assessment of the State of Technology of Automotive | Stirling Engines |
|
1980 | NASA | DOE/NASA/0032-79/4 |
|
|
|
|
|
| Assessment of the state of technology of automotive | Stirling Engines | MTI, Stirling Engine Div | 1979 | DOE\MTI\NASA | CR-159631 |
|
|
available from NTIS | DOE conservation and solar applications, Office of | Transportation Programs |
| Atmospheric Stirling Engine |
|
Watanabe, N.; Isshiki, N. | 1991 | 5th Int. Congree on Stirling Engines, Dubrovnik |
|
|
|
|
|
|
| Audels Engineers and Mechanics guide #4 | Hot air Engines | Frank D. Graham | 1939 | Theo. Audel & Co.,NY |
|
|
1733-1754 | Chapter 53, Hot Air Engines. deals with operating | and maintaining various kinds of hot air engines. |
|
| Auto Engines of tomorrow: Power alternatives for car to come |
|
Dark, H.E. | 1975 | Indiana University Press, Bloomington, Ind. |
|
|
|
|
|
|
| Automobile Stirling Engine Development Program |
|
Ford Motor Company | 1980 | DOE/NASA | DOE/NASA/4396-4 March 1980 |
|
|
|
|
|
| Automobile Stirling Engine Development Program. Semi-Annual | Technical Progress Report for Period July 1-December 31,1984 | Mechanical Technology Inc. | 1985 | DOE/NASA | DOE/NASA/0032-25 Nov. 1985 |
|
|
|
|
|
| Automobile Stirling Engine Program-A sucess, The | Paper |
|
1987 |
|
SAE#879032 | N87-22562/9 |
|
|
|
|
| Automotive Engines for the 1980's |
|
Richarson, R.W. | 1974 | Am. Chem. Soc. Div. Fuel Chemistry Vol 19 |
|
|
40-45 |
|
|
|
| Automotive Stirling Development Program, MOD 1, Stirling | Engine development | Simetkosky, Michael A. | 1983 | IECEC 18th Conf. Proc. Aug 21-26\MTI | SAE#839140 |
|
856- |
|
|
|
| Automotive Stirling Engine Development for a Small Passenger | Car | Kondoh, T, Katoh, K. | 1988 | SAE Int. Cong. and Expo. Detroit 1988 | SAE#880538 |
|
|
March 878, |
|
|
| Automotive Stirling Engine Development Program |
|
Kitsner, Ernest\Ford Motor Co. | 1983 | DOE\NASA/4396-4 Aug. 1983 | NASACR-168205 | DOE/NASA4396-4 | 406 p | N83-15176/1, NTIS 1980 NASA cont EC-77-C-02-4396 | N83-15177/9 | N83-27925/7 |
| Automotive Stirling Engine Development Program |
|
Kitzner, E.W. | 1980 | DOE/NASA March 1980 DOE/NASA/4396-4 | Cont. No. EC-77-C-02-4396 | NASACR-159836 | 440p |
|
|
|
| Automotive Stirling Engine Development Program |
|
|
1981 |
|
NTIS#N81-11952/1 |
|
|
|
|
|
| Automotive Stirling Engine Development Program Semiannual | Program Report July 1, 1985-December 31, 1985 |
|
|
|
N86-30579/4 |
|
|
655636 |
|
|
| Automotive Stirling Engine Development Program. Quarterly | Technical Progress Report for Oct-Dec 1977 | Kitzner, E.A. | 1977 | Ford Motor Company/NASA | Jan 78 | NASACR-135331 |
|
|
|
|
| Automotive Stirling Engine Development Program. Quarterly | Technical Progress Report April 1-June 30 1981 |
|
1982 | Mechanical Technology Inc. | NTIS#DE82016935 MTI81ASE229QT13 | NASACR-167907 | 110P |
|
f/NASA |
|
| Automotive Stirling Engine Development Program. Quarterly | Technical Progress Report April 1978-June 1978 |
|
1980 |
|
|
COO4396-3 |
|
|
|
|
| Automotive Stirling Engine Development Program. Quarterly | Technical Progress Report Jul 1-Sept 30,1979 |
|
1980 | NASA | DOE/NASA/0032-79/5 |
|
|
|
|
|
| Automotive Stirling Engine Development Program. Semiannual | Technical Progress Report, July 1-December 31, 1986 | Farrell, R.; Hindes, C. | 1988 | MTI f/NASA NAS126180839 | NTIS#N90116542 |
|
59p | Discussion on the progress made by Mechanical | Technology Inc for the period. |
|
| Automotive Stirling Engine Development Program. Semiannual | Technical progress Report, Jan 1-Jun 30, 1983 |
|
1983 | Mechanical technology Inc. f/DOE | NTIS#DE84007022 | NASACR-168205 | 85p | Aug 83 |
|
|
| Automotive Stirling Engine Development Program. Technical | Progress Report July 1-December 31, 1982 | Nightingale, N.; Ernst, W.;Richey, A. | 1983 | Mechanical Technology Inc. f/DOE | NTIS#DE83012969 | NASACR-168074 | 73p |
|
|
|
| Automotive Stirling Engine Development Program. Technical | Progress Report March 30-June 28, 1980 |
|
1981 | NASA | NTIS#DOE/NASA/0032-80/8 |
|
|
|
|
|
| Automotive Stirling Engine Development Program: Semiannual | Technical Report, Jan 1-June 30, 1987 | NASA | 1988 | NASA f/MTI/DOE | NTIS#DE88013875/MTI87ASE575SA12 | NASACR-180840 | 75p feb 88 |
|
|
|
| Automotive Stirling Engine Development Program; a success |
|
Tabata, William K. | 1989 | NASA\DOE | NASA TM-89892 |
|
|
|
|
|
| Automotive Stirling Engine Development Program-Combustion | System Development | Farrell, R.A. | 1984 | IECEC 19th Conf. Proc. | SAE#849129 |
|
|
|
|
|
| Automotive Stirling Engine Development Program-Overview | and status report | Nightingale, Noel P. | 1983 | IECEC 18th Conf. Proc.\MTI | SAE#839141 |
|
863- |
|
|
|
| Automotive Stirling Engine Development Report. Quarterly | Technical progress report for Period June 29-Oct 3,1980 |
|
1981 | NASA | NTIS#DOE/NASA/0032-81/9 |
|
|
|
|
|
| Automotive Stirling Engine Market and Industrial Readiness | Program(MIRP) Final Report for Phase 1A Sept 82-July 84 |
|
1984 | Mechanical Technology Inc. | DE84017263 | MTI84SESD14 | 20p | Aug 84 | includes a history of the project | NTIS507857 |
| Automotive Stirling Engine Market and Industrial Readiness | Program (MIRP), Phase 1 Report |
|
1982 | Mechanical Technology Inc. f/DOE | NTIS#DE82017107 | MTI010 | 293p |
|
|
|
| Automotive Stirling Engine Mod 1 Design Review Report | Volume II |
|
1982 | Mechanical Technology Inc. f/DOE | NTIS#DE83001746 MTI80ASE142DR1 | NASACR-167936 | 467P |
|
N83-10991/8 |
|
| Automotive Stirling Engine Mod 1 Design Review Report |
|
|
1982 | Mechanical Technology Inc. f/DOE | NTIS#DE83001747 | NASACR-167935V1 | 639p | DOENASA003216V1 |
|
|
| Automotive Stirling Engine Mod 1 Design Review Report. | Volume III |
|
1982 | Mechanical Technology Inc. f/DOE | NTIS#DE83001745 | MTI80ASE142DR1 | 360P | NASACR167937 | N82-34312/0 |
|
| Automotive Stirling Engine MOD 1 Design Review. Vol. 1 |
|
|
1983 |
|
NTIS#N82-34311/2 |
|
|
|
|
|
| Automotive Stirling Engine Mod I design review report |
|
|
1982 | NASA Technical Memo. Aug. 1982 | NASATM-167936/167937 |
|
|
MTI/NTIS |
|
|
| Automotive Stirling Engine Program. Final Report |
|
Mechanical Technology Inc. | 1991 | Mechanical Technology Inc. | MTI91R15 NASA Cont. DEN3-32 |
|
|
|
|
|
| Automotive Stirling Engine Progress Report for Period: | January 1-June 30, 1987 | Mechanical Technology Inc. | 1988 | NASA | DOE/NASA/0032-31 |
|
|
|
|
|
| Automotive Stirling Engine Systems Development |
|
Richey, A.E. | 1984 | IECEC 19th Conf. Proc. | SAE#849128 |
|
|
|
|
|
| Automotive Stirling Engine, The |
|
Nightingale, Noel.P. | 1986 | Mechanical Technology Inc | #86TR14/86ASE518SR1, MTI Report |
|
|
|
|
|
| Automotive Stirling Engine: Mod II Design Report |
|
Nightingale, Noel P. | 1988 | NASA\DOE Conservation and Renewable Energy Office | NASA CR-175106 |
|
|
|
|
|
| Automotive Stirling reference Engine Design Project |
|
|
1981 |
|
NTIS#N81-31032/8 |
|
|
|
|
|
| Automotive Stirling Summary and Overview |
|
|
|
|
DE86004187 |
|
|
620427 |
|
|
| Automotive Technology Development Contractors Coordination | Meeting 19th Summary Report |
|
1981 | DOE Office of Vehicle and Engine Res. and Dev. | NTIS#DE83003898 | CONF811090Sum | 821p |
|
|
|
| Automotive Technology Development Program Report to Congress |
|
|
|
|
DE86010883 |
|
|
649921 |
|
|
| Auxiliary power generating system for manned Mars mission |
|
Tonelli, A.D. | 1963 | AIAA, New york |
|
|
|
|
|
|
| Award Winning V2 Hot Air Engine |
|
Goodger, Tony | 1984 | Model Engineer, 16 November 1984 |
|
|
pp. 556-557 | Model Hot Air engine design, drawing |
|
|
| Back to back test for determining the pumping losses in a | Stirling Cycle Machine |
|
1982 |
|
SAE#829308 |
|
|
|
|
|
| Backyard version of a Stirling Engine can be built | with common materials.,A | Walker, Jearl | 1990 | Scientific American, January 1990 |
|
|
pp. 140-144 | building a tin can Stirling engine(drawings) | from the Amateur Scientist section |
|
| Balanced Compounding of Stirling Machines |
|
Finkelstein, Theodore | 1978 | IECEC 13th Conf. Proceedings Aug 1978 | SAE#789194 |
|
1791-1797 | TCA Stirling Engine Research and Developement | Co. POB 643, Beverly Hills, CA |
|
| Base Technology Stirling Engine Military Applications | Assessment | USAF, Wright Aeronautical Lab. | 1983 | Argonne National Labs for Wright Patterson AFB | AFWAL-TR-84-2016 Oct. 1983 |
|
|
|
|
|
| Basic Cycle Analysis of Two Phase Two-Component Stirling | Engine | Hirata, M.;Kasagi, N. | 1984 | 2nd Int. Conference on Stirling Engines, Shanghai |
|
|
|
|
|
|
| Basic design of the most compact State of the art Stirling | Engine | Lienesch, J.H. | 1968 | General Motors Research Center Publication | NTIS#78N26262 | GMR-2690 |
|
Section 2-205 |
|
|
| Basic development on Thermodynamics and Magnetic Force | transmission of a Free Piston Stirling drive unit. | Klass, O. | 1989 | Bomin-Solar G.m.b.H.,Loerrach(Germany,F.R.) | NTIS#TIBB8982497 (in German) |
|
74p |
|
|
|
| Beale Free-Piston Engine, The |
|
Agbi, B. | 1971 | M. Sc. Thesis Univ Calgary, Alberta Canada |
|
|
|
|
|
|
| Beitrage zur Theorie der Gescholssenen Luftmaschinen |
|
Slaby, Prof. Adolf | 1878 | Verh. VBer. Gew Fleiss, Berlin |
|
|
|
Slaby's contribution to the theory and his tests | of engines. |
|
| Bench scale testing of a Heat Pipe Receiver for solar | thermal electric application | Adkins, D.R.; Dudley, V. | 1990 | Sandia Laboratories f/DOE | SAND900097C | NTIS#DE90009834 | 35 |
|
|
|
| Bernier's Hot Air Engine |
|
|
1887 | Engineer, London, Nov 4, 1887 | Scientific American Supplement Dec. 10, 1887 |
|
|
Description of above also in Polytechnische Joul. | VCCXVII 1888, pg 193, |
|
| Betrachtungen sum ausseren verbrennungssytem des Stirling | Heissgasmotors(consideration on external combustion) | Zacharias, F.A. | 1970 | MTZ Motortechnische Zeitschrift, Vol 32 |
|
|
1-5 |
|
|
|
| Bibliography of reports from the Solar Thermal Distributed | Receiver Systems project at Sandia National Laboratories | Leonard, J.A.; Poore, A.V. | 1989 | Sandia National Laboratories for DOE, June 89 | SAND89-1248 |
|
75p | Listing of technical reports from Sandia Labs | concerning the Solar Thermal dish systems |
|
| Biomedical Power |
|
Martini, W.R. | 1977 | IECEC 12th Conf. Proc. Washington, DC |
|
|
102-103 |
|
|
|
| Breadboard Development of a Hydraulically coupled Free- | Piston Stirling Engine Heat Pump Compressor |
|
|
|
DE85005242 |
|
|
NTIS545602 |
|
|
| Bridesmaid of engines seeks stardom(the Stirling Engine) |
|
DeMeis, Richard | 1985 | Aerospace America V23 Aug 85 |
|
|
26-28 |
|
|
|
| British device runs TV on propane gas |
|
|
1975 | New York Times June 12 |
|
|
|
|
|
|
| Build a 60kw Heat Pipe in six weeks?-No problem? | Paper |
|
1987 |
|
SAE#879214 |
|
|
|
|
|
| Build a Two Cylinder Stirling Cycle Engine |
|
Gingery, D.J. | 1990 |
|
|
|
76 | order from Brad Ross, and Lindsay Pubs. |
|
|
| Build Dave Gingery's Stirling Cycle Engine | Page from Lindsay's catalog describing how to build it. |
|
1990 | Lindsay Publications Inc, Manteno, Ill | Catalog of books |
|
pg. 21 |
|
|
|
| C.V.S. test simulation of a 128 kW Stirling Passenger Car | Engine | Michels, A.P.J. | 1972 | IECEC Conference Proceedings | SAE#729133 |
|
|
|
|
|
| Calculated 4L23 Stirling Engine Performance |
|
Diepenhorst, R. | 1970 | General Motors Research Center Publication | NTIS#7826262 | GMR-2690 |
|
Section 2-115 |
|
|
| Calculating Heat Transfer from Pressure and Volume | Measurements in a Two space Apparatus | Finkbeiner, D.L.; Kornhauser, A.A. | 1993 | IECEC 28th conf. Proceedings | SAE#93199 |
|
2.745 | Finkbeiner-Virginia Polytechnic Inst. | Kornhauser-State University, Blacksburg |
|
| Calculating increase in power output obtainable by | increasing the working pressure of a TMG.... | Cooke-Yarborough, E.H. | 1977 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2885 |
|
|
title: Calculating increase in power output obtain | able by increasing the working pressure of the TMG | using the present design of corrugated diaphram |
| Calculation of Comparative Gas Friction of the Sibling Cycle | Simulation | Mitchell, M.P.; | 1985 | IECEC 20th Conf. Proc. | SAE#859286 |
|
1853-1858 | pgs 3.294-3.308 |
|
|
| Calibration and comparison of the NASA Lewis Free Piston | Stirling Engine model predictions with RE-1000 test data |
|
1987 |
|
SAE#879098 | N87-22561/1 |
|
|
|
|
| Caloric Engine |
|
Jenkins, J. | 1880 | Engineering Dec 10, 1880 | #1799 |
|
|
assigned in England to P. O'Halloran | A flexible diaphram piston motor with strengthened | India rubber distons |
| Caloric Engine |
|
|
1947 | Automotive Engineer, V37 |
|
|
372-376 |
|
|
|
| Caloric Engine, The |
|
Ericsson, John | 1833 | London |
|
|
|
|
|
|
| Calorimetric Thermal vacuum performanc characterization of | the BAe 80k Space Cryocooler | Kotsubo, V.;Johnson, D.L.;Ross, R.G. | 1992 | IECEC 27th proceedings\JPL\Cal. Inst. of Tech | SAE#929037 |
|
5.101-5.107 |
|
|
|
| Can Diesel and Stirling Engines be combined? |
|
|
1985 | Automotive Engineering Vol 93 Dec 85 |
|
|
72-77 | diagrams |
|
|
| Cast Fe-Base Cylinder/Regenerator housing alloy |
|
|
1983 |
|
NTIS#N8312214/3 |
|
|
|
|
|
| Cast Iron Base Alloy for Cylinder/Regenerator Housing: Final | Report | Witter, S.L.; Simon, H.E. | 1985 | Garrett Processing Co. f/NASA Washington, DC | NASACR-182116 | NTIS#N88196134 | 142p Aug 85 |
|
|
|
| Cayley's Hot Air Engine |
|
Poingdestre, W.W. | 1850 | Proceedings of Inst. of Civil Engineers, minutes |
|
|
|
|
|
|
| Centenary of the Heat Regenerator and the Stirling | Air Engine | Anon. | 1917 | The Engineer, December 14, 1917 |
|
|
|
Has the original specification of the patent. |
|
|
| Century old engine pumps heart |
|
|
1976 | New York Times, Sunday Dec 5 |
|
|
|
|
|
|
| Ceramic Applications in the Advanced Stirling Automotive | Engine | Tomazic, W.;Cairelli, J.E. | 1977 | Fifth Army Materials Technology Conf. Mar 21-25 |
|
|
|
|
|
|
| Ceramic Automotive Stirling Engine Program |
|
|
1987 |
|
NTIS#N8712047/3 |
|
|
707,409 |
|
|
| Ceramic Automotive Stirling Engine Study |
|
|
|
|
DE86005945 |
|
|
620430 |
|
|
| Ceramics in the ERDA highway vehicle heat engine systems | program |
|
1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV | SAE#760238 |
|
|
|
|
|
| Cermanic Automotive Stirling engine Study |
|
|
|
|
N86-16725/1 |
|
|
12-627764 |
|
|
| Characteristic Analysis of Cooke-Yarborough Cycle Machines |
|
Sekiya, H.; Susai, T.; terada, F. | 1993 | IECEC 28th Proceedings | SAE#93131 |
|
2.689 | R/D Center Air conditioning & Refrigeration | SANYO Electric |
|
| Characteristics Dynamic Energy Equations for Stirling cycle | Analysis | Larson, V.H. | 1981 | IECEC 16th Proceedings | SAE#819798 duplicate number |
|
|
|
|
|
| Characteristics, Finite Element and Analysis, Test | Description and Preliminary Test Results of the STM4-120... | Linker, K.L.; Rawlinson K.S. | 1991 | Sandia Nat. Labs. | SAND90-1162 Oct. 1991 |
|
|
|
|
|
| Characterization of Miniature Stirling Cycle Cryocoolers | for Space Applications | Ross, R.G.;Johnson, D.L. | 1991 | Proc. 6th Int. Cryocooler Conf. Plymouth MA | DTRC-91/002 David Taylor research Center |
|
|
|
|
|
| Characterization of Solar Thermal Concepts for Electrical | Generation | Williams, T.A. et al. | 1987 | Pacific Northwest Laboratory, Richland | PNL-6128 Vol. 1 1987 |
|
|
|
|
|
| Characterization of transients of direct solar insolation | based on one minute data | Ross, Brad A. | 1992 | IECEC 27th Proceeedings\Stirling Technology Co | SAE#929180 |
|
5.215-5.220 |
|
|
|
| Choice of gas exchange models in Stirling Cycle Machine | analysis | Reader, G.T.;Cross, M. | 1979 | IECEC Record | SAE#799231 |
|
|
|
|
|
| Choosing an Alloy for Automotive Stirling Engines: Twenty | alloys are evaluated for resistance to corrosion, high temp | NASA | 1989 | NASA Washington DC | NTIS#NTN890221 |
|
1p | One page announcement of technology available for | utilization. (alloys evaluated for resistance to | corrosion, permeation by hyrogen and high temp) |
| Civilization, to John Ericsson, debtor |
|
Johnson, O. | 1946 | The Scientific Monthly, Jan |
|
|
101-106 |
|
|
|
| Clean Power for Tomorrow |
|
|
1990 | Cummins Power Generation Inc, Columbus Indiana | CPG-S001 5/90 |
|
|
Brochure describing Cummins new Solar Dish system | and Free-Piston Stirling Engines |
|
| Closed Cycle Cryocooler for Low Temperature Electronic | Circuits. Phase 1. Concept Study |
|
1981 |
|
NTIS#AD-A093416/6 |
|
|
|
|
|
| Closed Cycle Cryogenic Refrigerators as integrated cold | sources for Infrared Detectors | Daniels, a.; DuPre, F.K. | 1966 | Applied Optics Vol 5 no.9 |
|
|
|
|
|
|
| Closed-Cycle, Solar, Hot-Air Engines-1,2, |
|
Farber, E.A.; Prescott, F.L. | 1965 | Solar Energy V9 ,4 Oct-Dec 1965 |
|
|
170-176 | Overall discussion of operating principles in | design of 1/4 hp engine, Pt 2 discusses 1/3 hp | engine devlopments at Univ. of Fla. |
| Closed-Form Analysis of a Gamma, back to back Free Displacer | Stirling engine | Lewis, K.L., Rallis, C.J. | 1983 | IECEC 18th Proceedings\Univ of Witwatersrand, SA | SAE#839127 |
|
785- |
|
|
|
| Closed-Form Solutions for a coupled ideal analysis of Free- | Piston Machines of the Harwell type | Berchowitz,David M.; Wayatt-Mair, G.F. | 1978 | Sch. of Mech. Eng. Univ. of Witwatersrand 1978 |
|
|
|
IECEC 14th Conf. Proceedings 1979 pg 1114-19 |
|
|
| Coal Fired Stirling Engines |
|
Walker, Graham, Fauvel, O.R.;Zia, Z. | 1984 | Engineering Digest Vol 30, Oct 84 |
|
|
23-24 | diagrams |
|
|
| Coal fired Stirling Engines for marine propulsion |
|
Walker, G.; Fauvel, R.; Xia,Z. | 1982 | Univ. of Calgary |
|
|
|
|
|
|
| Coal-Fired Stirling Engine Hydrostatic Locomotive |
|
Srinivasan, V.;Walker, G. | 1982 | ASME | ASME#82-WA/RT-3 |
|
|
|
|
|
| Coal-fired Stirling Engines for railway locomotive and | stationary power applications | Walker, G.; Johnson, W.E.;Kentfield, J. | 1983 | Proc. of Inst. of Mech. Engineers, Vol 197, Oct 83 |
|
|
233-246 |
|
|
|
| Coatings for high temperature bearings and seals. | Final report | Sliney, H.E. | 1987 | NASA Lewis Research Center | NASATM-100249 | NTIS#N88134531 | 14p |
|
|
|
| Cogeneration Technology Alternative Study(CTAS) | United Technologies Corp. Final Report VIII |
|
1981 | United Technologies Corp | DOE/NASA/0030-80/3 |
|
|
Vol.III:Energy Conversion System Characteristics |
|
|
| Cogeneration Technology Alternatives Study (CTAS). General | Electric Company Final report. V3 Industrial Processes |
|
1981 | General Electric Company | NTIS#DOE/NASA/0031-80/3 |
|
|
|
|
|
| Collection of Stirling Engine Reports from General Motors | Research--1958 to 1970:Part 4-Piston Seals | General Motors Research Center | 1978 | General Motors Research Center | GMR-2690 April 1978 |
|
|
|
|
|
| Collection of Stirling Engine Reports from General Motors | Research--1958 to 1970:Part 3-Stirling Engine Materials | General Motors Research Center | 1978 | General Motors Research Center | GMR-2690 April 1978 |
|
|
|
|
|
| Collection of Stirling Engine Reports from General Motors | Research-1958-1970,Part1,2 Model 3 Ground Power Units | General Motors Research Center | 1978 | General Motors Research Center | GMR-2690-Part 1,2, April 1978 |
|
|
Construction and testing |
|
|
| Collection of Stirling Engine Reports from General Motors | Research-1958-1970, Part 2 Stirling Cycle Analysis | General Motors Research Center | 1978 | General Motors Research Center | GMR 2690-Part 2 April 78 |
|
|
Stirling Cycle Analysis and engine studies |
|
|
| Collection of Stirling Engine Reports from General Motors | Research-1958-1970, Part 6 regenerators | General Motors Research Center | 1978 | General Motors Research Center | GMR-2690-Part 6 |
|
|
|
|
|
| Collection of Stirling Engine Reports from General Motors | Research-1958-1970, Thermal Energy Storage and Publications | General Motors Research Center | 1978 | General Motors Research Center | GMR-2690-Part 7 |
|
|
|
|
|
| Combination of a radioisotope heat source and a Stirling | Cycle conversion system, The | Hermans, M.L.; Uhlemann, H.;Spigt,C.L. | 1972 | Proc. on 2nd Int Conf. on Power from Isotopes |
|
|
445-466 | Conference held in Madrid |
|
|
| Combination of a Stirling Engine with a remotely placed heat | source | Uhlemann, H.; Spigt, C.L. | 1974 | IECEC 9th Conf. Proc. San Francisco, CA |
|
|
620-627 |
|
|
|
| Combination of electric heat battery and Stirling Engine |
|
Meijer, R.J. | 1969 | Denkschrift Elektrospeicherfahrzeuge, Vol 11 |
|
|
143-164 |
|
|
|
| Combustion and emission formation in the Stirling Engine | with exhaust gas recirculation | Davis, S.R.; Henein, N.A.;Lundstrom, R. | 1971 | SAE Combined Fuel & Lubricant Powerplant Truck Mtg | SAE#710824 |
|
|
Oct 26-29 |
|
|
| Combustion Heated, Thermally activated Vuilleumier | Refrigerator | Crouthamel,J.;Shelpuk,B. | 1972 | Cryogenic Engineering Conf. Aug 9-11 |
|
|
339-351 |
|
|
|
| Comments at Stirling Engine symposisum |
|
Tew, R. | 1977 | Joint Center for Graduate Study, Richland WA |
|
|
|
|
|
|
| Comments on heat engine development |
|
Underwood, A.F. | 1976 | ERDA Hwg Veh Syst. Cont. Coord. Mtg, Ann Arbor MI |
|
|
|
October |
|
|
| Comments on the Computer Aided Design of Stirling Engines |
|
Reader, G.T., Taylor, D.R. | 1983 | 18th IECEC Proceeding\RNEC, Devon, England | SAE#839118 |
|
737 |
|
|
|
| Commercial Application of Stirling Refrigerators |
|
Walker G.;Fauvel, O.;Reader Graham. | 1988 | University of Calgary | SAE#889037 |
|
|
General Pneumatics Western Research Center, | Scottsdale, AZ |
|
| Commercialization of Dish Stirling Solar Terrestrial Systems |
|
|
1991 | IECEC 26th Conf. Proc. | SAE#905292 |
|
|
|
|
|
| Compact Heat Exchangers |
|
Kays, W.M.; London, A.L. | 1964 | McGraw Hill, New York |
|
|
|
|
|
|
| Comparative analysis of computer codes for Stirling Cycle | Engines. | Ash, J.E.; Heames, T.J. | 1981 | IECEC 16th Proceedings | SAE#819797 |
|
|
|
|
|
| Comparative Analysis of Computer Codes for Stirling Cycles |
|
Ash, J.E.; Heames, T.S. | 1981 | IECEC 16th Proceed. 1981/ Argonne Nat. Lab. f/DO | SAE#819797\NTIS#DE83009626 | CONF81081251 | 6p | IECEC Conf in Atlanta 9 Aug 1981 |
|
|
| Comparative analysis of the Stirling and other combustion | engines | Davis, S.R.; Henein, N.A. | 1973 | SAE | SAE#730620 SAE SP-739 |
|
|
|
|
|
| Comparative Assessment of Solar Thermal Electric Power | Plants in the 1-10 MWe Range | Roseberg, L.S.;Revere, W.P. | 1981 | Jet Propulsion Laboratory, Pasadena CA f/DOE | NTIS#DE81030894 | DOEJPL106021 | 89p |
|
|
|
| Comparative Simulation of Stirling and Sibling Cryocoolers | with two codes. | Mitchell, M.P.;Wilson, K.J.;Bauwens, L. | 1989 | IECEC 24th Conf. Proceedings | SAE#899537 |
|
2205-2211 | Mitchell/Stirling Machines Systems, Berkeley CA | Mathew Mitchell, Kelpie Wilson, Luc Bauwens |
|
| Comparative Survey of dynamic analysis of Free-Piston | Stirling Engines | Kankam, M.D.;Rauch, J.S. | 1991 | IECEC 26th Conf. Proc./NASA Lewis Research Center | NTIS#N91268706 | NASATM-104491 | 314-319 | August 1991, Boston |
|
|
| Comparison and selection of Computer simulation codes for | Stirling Engines | Taylor, D.R. | 1984 | IECEC Record/2nd Int. Conf. on Stirling Engines | SAE#839119 |
|
|
|
|
|
| Comparison of advanced solar engines for parabolic dish | solar thermal power plants |
|
1980 |
|
SAE#809347 |
|
|
|
|
|
| Comparison of analysis techniques for a two phase | component Stirling Engine |
|
1986 |
|
SAE#869120 |
|
|
|
|
|
| Comparison of calculation procedures for Stirling Engines | with experimental measurements | Martini, W.R. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Comparison of CO2 cycles for Autom,otive Power Plants |
|
Bjerklie, John W. | 1972 | MTI | SAE#729135 |
|
896-904 |
|
|
|
| Comparison of Conceptual Designs for 25 KW Advanced Stirling | conversion for Dish Electric Application. Final report | Shaltens, Richard K. | 1989 | NASA Lewis Research Center, Cleveland | NTIS#N89267819 | NASATM-102085 | 16p |
|
|
|
| Comparison of conceptual designs for 25 kWe Advanced | Stirling Conversion systems for Dish Electric Applications | Shaltens, Richard K.;Schreiber, J.G. | 1989 | IECEC 24th Conf. Proc. /NASA Lewis Research Center | SAE#899547 TM-102085 |
|
16 | Final report NTIS#N89267819XSP | NASA TM102085 |
|
| Comparison of Free-Piston Stirling Engine Model Predictions | with RE1000 Engine test Data | Tew, R.C. | 1984 | NASA Lewis Research Center f/DOE | NTIS#DE84011501 | NASATM-83650 | 19P | 19 AUG 84 |
|
|
| Comparison of GLIMPS and HFAST Stirling Engine Code | predictions with experimental data | Tew, Roy; Geng, Steven | 1992 | IECEC 27th Proceedings\NASA Lewis Research Center | SAE#929029 |
|
5.53-5.58 | TM-105549 |
|
|
| Comparison of measured and calculated forces on the RE-1000 | Free-Piston Stirling Engine displacer |
|
1987 |
|
SAE#879097 |
|
|
|
|
|
| Comparison of NASA Lewis Reseach Center's performance | Code's Pressure Drop Model Pred. to Stirling Engine...data | Sullivan, T.J. | 1988 | Sverdrup Technology f/NASA | NTIS#DE89006615 |
|
18p |
|
|
|
| Comparison of Stirling Engines for use with a 25kw Dish | Electric Conversion System, A | Shaltens, R.K. | 1987 | NASA Lewis Research Center | SAE#879069 | NASATM-100111 |
|
N87-27564/0 754,147 | DE87014499, | 811,815 |
| Comparison of the Thermal conduction losses in the external | and internal displacer of the TMG Heat Engine | Franklin, E. | 1971 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2476 |
|
|
|
|
|
| Compatability of Alternative Fuels with advanced automotive | Gas Turbine and Stirling Engines. A literature survey |
|
1981 |
|
NTIS#N81-27604/0 | DE81026671 |
|
|
|
|
| Completion and Testing of a 90CM3 Stirling Engine |
|
Ross, Andrew | 1988 | IECEC 23rd Conf. Proc. | SAE#889277 |
|
97-99 |
|
|
|
| Component Improvement of Free-Piston Stirling Key Technolog | for Space Power | Alger, D.L. | 1988 | NASA Lewis Research Center/4th Int.Conf on S.E. | NTIS#N88254768 ICSE #030 | NASATM-100950 | 125-130 | 4th conf. Tokyo |
|
|
| Component Technology for Stirling Power Converters |
|
Thieme, Lanny G. | 1991 | IECEC 26th Conf. Proc./NASA Lewis |
|
|
223-228 |
|
|
|
| Composite bearing and seal materials for advanced heat | engine applications to 900 degrees C. | Sliney, H.E. | 1990 | NASA Lewis Research Center | NTIS#DE91004659 | NASATM-103612 | 20 |
|
|
|
| Computation of the temperature field of regenerators with | temperature-dependent parameters | Kohler, J.W.L. | 1968 | Proc. Int. Cryogenic Conf. Brighton |
|
|
|
|
|
|
| Computation techniques in finite element analysis of a | Stirling Engine Regenerator |
|
1985 | IECEC 20th Conf. Proc. | SAE#859433 |
|
|
|
|
|
| Computational Techniques and Computer Programs to analyze | Stirling Cycle Engines using characteristic dynamic equation | Larson, V.H. | 1982 | IECEC 17th Proceedings | SAE#829283 |
|
|
|
|
|
| Computer Analysis of Stirling engines |
|
Finkelstein, Theodore | 1975 | IECEC 10th Conf. Proc. Newark, NJ Aug 17-22 | SAE#759140 |
|
933-941 | TCA Stirling Engine Research & Development Co., | Beverly Hills, CA | also Advancements in Cryogenic Eng.vol 20 p269-282 |
| Computer and experimental simulation of Stirling Cycle | Machines.,A | Berchowitz,David M.; Urielli, I. | 1978 | IECEC 13th Conf. Proc\Univ. of Witwatersrand |
|
|
|
San diego, CA Aug 20-25 |
|
|
| Computer Model of Catalytic Combustor/Stirling Engine heater | head. | Chu, E.K.;Chang, R.L.;Tong, H. | 1981 | Acurex Corp., Mountain View CA f/DOE | NTIS#DE82013778 | NASACR-165378 | 192p | DOENASA01861 |
|
|
| Computer Modeling and Simulation of a Magnetically coupled | Stirling Engine-Linear heat Pump as a typical dynamic system | Chen, G.;McEntee, J.; shonder, J. | 1992 | ASME |
|
|
|
ASME Winter Annual Meeting |
|
|
| Computer Program for a Four-Cylinder Stirling Engine Control | Simulation | Daniele, C.J.; Lorenzo, C.F. | 1982 | NASA Lewis Research Center f/DOE | TM-82774 | NTIS#DE83003197 | 81p | DOENASA5104037 | N83-12359/6 |
|
| Computer Program for Stirling Engine Performance Calculation |
|
Tew, Roy C. | 1983 | NASA Lewis Research Center f/DOE | NTIS#DE83006114 | NASATM-82960 | 98p | N83-17423/5 |
|
|
| Computer Simulation and Experimental Development of Liquid | Piston Stirling Cycle Engines, A | Goldberg, L.F. | 1979 | Univ. of Witwatersrand, SA | MSc Thesis March 1979 |
|
|
|
|
|
| Computer Simulation model for Stirling |
|
Azetsu, A. et. al | 1982 | I. Meche. |
|
|
57-63 |
|
|
|
| Computer Simulation Model for Stirling Engine |
|
Azetsu, A.,Nakajima, N.,Hirata, M. | 1982 | Conference on Stirling Engines, March 1982 | Paper C17/82 Inst Mech Eng. Reading England |
|
57-63 | Conf. Progress towards reality |
|
|
| Computer Simulation of a Ringbom-Stirling Engine | combined with a solar pond |
|
1988 | IECEC | SAE#889516 check number |
|
|
|
|
|
| Computer Simulation of Single Cylinder Free-Piston Stirling | Engines | Benvenuto, G.;Farina,F.;Troilo,M. | 1988 | IECEC 23rd Conf. Proceedings | SAE#889516 check number |
|
|
Univ. of L'Aquila, Italy(Benvenuto) |
|
|
| Computer Simulation of Stirling and Sibling Cycle Machines | Paper | Mitchell, Matthew P.; Bauwens, Luc | 1988 | IECEC 23rd Conf. Proceedings | SAE#889119 |
|
59-64 | Mitchell/Stirling Machines systems, Berkeley CA |
|
|
| Computer Simulation of Stirling Cycle Machines |
|
Berchowitz, D.M.;Rallis,C.J.;Urieli,I. | 1977 | IECEC 12th Conf. Proc. /Journal of Energy V2 N6 | SAE#779252 |
|
1512-1521 | Urieli, Ph.D. Thesis Univ of Witwatersrand, SA |
|
|
| Computer Simulation of Stirling Cycle Machines(check number) |
|
Urieli, I. | 1977 | University of Witwatersrand, Phd Thesis, Feb. 77 | SAE#779253 |
|
|
|
|
|
| Computer Simulation of the JPL Stirling Laboratory | Research Engine.,A | Urieli, I.;Hoehn, F.;Finegold, J.G. | 1978 | IECEC 13th Conf. Proceedings | SAE#789192 |
|
1780-1783 |
|
|
|
| Computer Simulation of the Transient Response of a 4 | Cylinder Stirling Engine with burner and air preheater..A |
|
1981 |
|
NTIS#N81-22313/3 | DOE/NASA/0226-1 |
|
A computer simulation of the transient response of | a 4 cylinder Stirling Engine with burner and air | preheater in a vehicle |
| Computerized Simulation of Stirling Engines | Masters Thesis | Lee, F.Y. | 1976 | Univ. of Calgary, Alberta, Canada |
|
|
|
|
|
|
| Concept of 'critical length ratio' in heat exchangers for | Stirling Cycle Machines | Organ, A.J. | 1975 | IECEC 10th Conf. Proc. Newark, NJ Aug 17-22 |
|
|
1012 |
|
|
|
| Conception and realization of a Test Bench of Dry Bearings | under Helium: Comparative Material Tests f/mach. pistons: FR | Dancette, M.;Blondeau, M., | 1984 | Societe Bertin et Cie, Plaisir(France) | NTIS#DE88900121 |
|
70p(in French) |
|
|
|
| Conceptual Design and Cost Analysis of Hydraulic Output unit | for 15kw Free-Piston Stirling Engine | White, M.A. | 1982 | DOE/NASA | NTIS#N8310561/9 | DOE/NASA/0212-1 |
|
Aug 82 |
|
|
| Conceptual Design and Cost Analysis of Hydraulic Output Unit | for 15 Kw Free-Piston Stirling Engine. Final report | White, Maurice A. | 1982 | NASA/Joint Center for Graduate Study, Richland WA | CR-165543 NTIS#N83105619 |
|
139p | DOENASA02121 |
|
|
| Conceptual Design of 500 to 3000 HP Stirling Engines for | stationary power generation | Toscano, William M.; Chandrasekhar, Ram | 1980 | SAE | SAE#819782 |
|
1860- | Foster-Miller Assoc., 350 2nd Ave, Waltham MA. | discussion of the efficiency and feaibility of | using large converted engines for Stirling power |
| Conceptual Design of a large coal-fired stationary Stirling | Engine |
|
1980 | SAE | SAE#819781 |
|
|
|
|
|
| Conceptual Design of a Long Life 10 watt Stirling Generator |
|
Ross, Brad; Tingey, Garth; Holliday, J. | 1991 | IECEC 26th Conf. Proc. Vol 5 | Stirling Technology Company, Richland,WA |
|
186-191 | Description of a 10watt gas fired Free-Piston | generator being developed by STC |
|
| Conceptual Design of a Solar Electric Advanced Stirling | Power system: Monthly Progress Report 1 Jan-31 Jan 87 |
|
1987 |
|
NTIS#DE87005036 |
|
|
732,527 |
|
|
| Conceptual Design of a Stirling Heat Pump/Air Conditioning | System | Khalili, Kaveh; Meijer, Roelf J.; | 1991 | IECEC 26th Conf. Proceedings/Stirling Thermal Mtrs |
|
|
250- |
|
|
|
| Conceptual Design of a Variable Displacement Stirling | Engine for Automotive Propulsion | Meijer, R.J.; Michels, A.P.J. | 1978 | Philips Research Laboratories | SAE#789351 |
|
1834-1840 |
|
|
|
| Conceptual Design of an Advanced Stirling Conversion System | for Terrestrial Power Generation |
|
1988 | NASA | CR-180889 | DOE/NASA/0371-1 |
|
|
|
|
| Conceptual Design of Free-Piston Stirling conversion system | Power units | Loktionov, Yu V. | 1991 | IECEC 26th Conf. Proceedings/Inst Physics USSR | SAE#910542 |
|
|
American Nuclear Soc. |
|
|
| Conceptual Design Study of an Advanced Stirling Conversion | System for Terrestrial Power Generation | NASA | 1988 | NASA\MTI January 1988 ;Report | CR-180890 |
|
|
CR-180889? | NASA0372-1 |
|
| Conceptual Design Study of an Automotive Stirling | Reference Engine System |
|
1980 | NASA | DOE/NASA/0032-79/1 |
|
|
|
|
|
| Conceptual Designs and integration of Stirling | Engines in Space Power Systems | Darooka, D.J. | 1988 |
|
SAE#889002 |
|
|
|
|
|
| Conceptual Study of the Potential for Automotive-Derived | and Free-Piston Stirling Engines in 30 to 400 kw (memo) | Vatsky, A., Chen H.S.;Dineen, J. | 1981 | Mechanical Technology Inc f/NASA May 81 | NTIS#N8310568/4 | NASACR-165274 |
|
A Conceptual study of the Potential for Auto- | motive derived and Free-Piston Stirling Engines in | 30 to 400 Kw Stationary power Applications. |
| Concerning Ericsson's and Stirling's Cycles |
|
Serruys, M. | 1973 | Review Gen. Thermodynamics Vol 12 |
|
|
1125-1134 |
|
|
|
| Conjugate Heat Transfer in oscilating fluid flow in | Stirling Engines | Devalba, M.; Rispoli, F. | 1991 | IECEC 26th Conf. Proc. Vol 5 |
|
|
170-175 | Univ di Roma, "La sapienza (Italy) Dipartimento di | Meccanica e Aeronautica, |
|
| Consistency, Stability, Convergence of Stirling Engine | Models | Bauwens, Luc | 1990 | IECEC 25th Conf. Proceedings, Vol 5 |
|
|
352-358 | Am. Inst. of Chem Engineers |
|
|
| Construction and Testing of a Sibling Cycle Refrigerator |
|
Mitchell, Matthew P.; Fabris, Drazen | 1993 | IECEC Proceedings | SAE#93276 | Pg. 2.603 |
|
|
|
|
| Construction of a Gas Refrigerating Machine |
|
Kohler, J.W.L.; Jonkers,C.O. | 1954 | Philips Technical Review, Vol 16 |
|
|
pp. 105-115 |
|
|
|
| Construction of a Total Energy system with a Stirling Engine | as a driving motor: A test installation in a building | Nelving, H.G.;Gummesson, S. | 1979 | Styrelsen foer Teknisk Utveckling, Stockholm | NTIS#STU774960 |
|
82p |
|
|
|
| Construction of Phillips Air Engine, The |
|
Van Weenen, F.L. | 1947 | Phillips Technical Revivew, Vol 9, no 5 1947 |
|
|
125-134 |
|
|
|
| Construction of the Philips Air Engine |
|
Van Weenen, F.L. | 1947 | Philips Technical Review | Rev., 9 |
|
pp. 125-134 |
|
|
|
| Continued Development and validation of the MTI harmonic | Stirling analysis code |
|
1987 |
|
SAE#879278 |
|
|
|
|
|
| Continued work on the Hot Air Engine |
|
Kirkley, D.W. | 1959 | B. Sc. Thesis, Durham University, UK |
|
|
|
|
|
|
| Continuing Development of a Natural Gas Fired Stirling | Engine Heat Pump | Monahan, R.E.;Clinch, J.M. | 1988 | IECEC 23rd Conf. Proc. Vol 1 | SAE#889038 |
|
pg. 21-26 |
|
|
|
| Control of elongation in the rolling diaphram seal under | cyclic pressure loading | Pedroso, R.I. | 1974 | Proc. Joint Automatic Control Conf. Univ of Texas |
|
|
539-548 | Univ of texas, austin, |
|
|
| Control systems for United Stirling 4-95 Engine in solar | applications | Alstrom, S.; Bratt, C. | 1981 | IECEC 16th Conf. Proc.Record | SAE#819787*** |
|
1888-1893 |
|
|
|
| Controllability of Free-Piston Stirling Engine/Linear Alter- | nator Driving a Dynamic Load | Kankam, M. David; Rauch, Jeffery S. | 1993 | IECEC 28th Conf. Proceedings | SAE#93251 |
|
2.937 | NASA Lewis Research Center |
|
|
| Controller for Stirling Engine |
|
|
1980 | Mechanical Engineer, January 80 |
|
|
|
|
|
|
| Controlling emissions with the Stirling Engine |
|
Davis, Stephen R. | 1973 | Wayne State University/Automotive Engineer v81 n4 |
|
|
32-35 | Low emissions can be further lowered by using a | high air to fuel ratio. Nitrous oxide can be | reduced with exhaust gas recirculation |
| Contruction and testing of the Stirling Universal Research | Engine | Jakeman, R.W. | 1966 | B.Sc. Thesis, Durham, University, UK |
|
|
|
|
|
|
| Conversion of a Crank-driven Vuilleumier Heat Pump into a | Free Piston Machine | Kuhl, H.D.; Schulz, S.; Thomas, B. | 1993 | IECEC Proceedings | SAE#93351 |
|
2.609 |
|
|
|
| Conversion of a standard single cycle Internal Combustion | Engine into a Gamma configuration air charged Stirling Eng. | Rice, G.,Buckingham, J.F. | 1978 | Reading University Engineering Dept | SAE#789196 |
|
1805-1811 |
|
|
|
| Conversion of Solar Energy into mechanical energy by the | Stirling Engine(In German) | Dekitsch, A.;Fritzsche,A. | 1978 | Dornier System G. m.b. H. Friedrichshafen, Germany | NTIS#TIBB9080039 May 78 |
|
111p |
|
|
|
| Conversion of solar energy to power |
|
Finkelstein, Theodore | 1961 | ASME | ASME Paper 61-WA-297 |
|
|
|
|
|
| Convienient procedures to convert two cycle diesel engines | into Hot Gas Engines.... |
|
1985 |
|
SAE#859427 |
|
|
|
|
|
| Cooling Capacity of Stirling Cryocoolers. The Split Cycle | and Nonideal gas Effects |
|
1983 |
|
NTIS#PB83-177402 |
|
|
Not available NTIS |
|
|
| Cost and Price Estimate of Brayton and Stirling Engines | in Selected production Volume |
|
1980 | Jet Propulsion Laboratories, Pasadena CA | DOE/JPL-1060-35 |
|
|
|
|
|
| Creep Rupture and Fractographic Analysis of Candidate | Stirling Engine Superalloys tested in Air | Bhattacharyya, A. | 1984 | Jnl of Materials for Energy Systems Mar 84 V5 no 4 |
|
|
188-204 |
|
|
|
| Creep Rupture Behavior of 6 Candidate Stirling Engine Iron | base Superalloys in High Pressure Hydrogen. Vol 1... |
|
1983 |
|
NTIS#N8322389/1 |
|
|
Volume 1: Air Creep Rupture Behavior |
|
|
| Creep Rupture Behavior of Seven Iron Base Alloys after Long | term aging at 760 Deg in Low Pressure Hydrogen |
|
1981 |
|
NTIS#N80-32488/2 | DOE/NASA1040/15 |
|
|
|
|
| Creep Rupture Behavior of six candidate Stirling Engine | superalloys tested in air | Bhattacharyya, S. | 1984 | Jnl of Engr Materials and Technology V106, Jan 84 |
|
|
50-58 | 8 Jan 1984 | bibliography |
|
| Creep Rupture Behavior of Stirling Engine Materials |
|
|
|
|
N86-15380/6 |
|
|
08-618190 NTIS |
|
|
| Creep-Rupture Behavior of a Development Cast Iron-Base Alloy | for use up to 800 deg. C. | Titran, R.H.;Scheuermann, C.M. | 1987 | NASA Lewis Research Center f/DOE | NTIS#DE88000252 | NASATM-100167 | 16p Aug 87 |
|
|
|
| Creep-Rupture Behavior of Candidate Stirling Engine Alloys | after Long Term aging at 760 exp 0C in Low Pressure Hydrogen | Titran, R.H. | 1984 | NASA Lewis Research Center f/DOE | NTIS#DE84013537 | NASATM-83676 | 43p | May 84 |
|
|
| Creep-Rupture Behavior of Candidate Stirling Engine Iron | superalloys in High Pressure Hydrogen. Vol II | Bhattacharyya, S. Peterman, W. | 1984 | IIT Research Inst, Chicago IL f/DOE | NTIS#DE84015152 | NASACR-174705 | 104p | Volume II, Hydrogen Creep-Rupture Behavior |
|
|
| Creep-Rupture Behavior of Iron Superalloys of High Pressure | hydrogen |
|
|
|
DE86005013 |
|
|
621790 |
|
|
| Cryocoolers, International Monographs in Cryogenics |
|
Walker, Graham | 1983 | Plenum Publishing Corp., New York |
|
|
|
|
|
|
| Cryocoolers, Vol.1 and II |
|
Walker, Graham | 1983 | Plenum Publishing Corp., New York |
|
|
|
|
|
|
| Cryogenic Refrigerators-An Updated Survey |
|
Strobridge, T.R. | 1974 | National Bureau of Standards | Technical Note 655 |
|
|
|
|
|
| CSTI-(Civil Space Technology Initiative) High Capacity Power |
|
Winter, J.M. | 1989 | NASA Lewis Research Center | NTIS#N89252829 89-2-1195 | NASATM-102059 | 21 | discusses SP-100 program developed in 1983, and | overview of the CSTI program, and goals, to assure | a 7 to 10 year lifetime for future space systems |
| Current Free-Piston Stirling Engine technology and | applications | Goldwater, B.A. | 1979 |
|
SAE#799246 |
|
|
|
|
|
| Current Review of Stirling Cycle Machine analysis methods, A | Paper | Urieli, I. | 1983 | IECEC 18th Conf. Proc. | SAE#839112 |
|
|
Sunpower Inc. |
|
|
| CVS Test Simulation of a 128 kW Stirling and other passenger | car Engines | Michels, A.P.J.; Philips, N.J. | 1972 | IECEC Proc.\Philips Research Laboratory | SAE#729133 |
|
875-866 | Gloeilampen Fabrieken, Eindhoven, Neth. |
|
|
| Cycle Analysis for Stirling Refrigeration with Multiple | stages, Perfect Refrigeration and Isothermal processes | Walker, g. | 1990 | Int. J. of Refrigeration Vol 13 No. 1 (UK) |
|
|
|
Butterworths Scientific, Guildford UK |
|
|
| Cyclic Processes in closed regerative gas machine analysed | by a digital computer simulating a differential analyser | Finkelstein, Theodore | 1962 | Trans ASME Jnl Eng. for Industry Feb. 1962 | ASME 84B No. 1, |
|
165-179 | ASME Mtg Los Angeles June 61 |
|
|
| Cyclic Simulation of Stirling Cryocoolers |
|
Atrey, M.D.;Bapat, S.L.;Narayankhedkar,K | 1990 | Cryogenics, Vol. 30, April 90 |
|
|
341-7 |
|
|
|
| Daedalus | (in Swedish) |
|
1932 | Tekniska Museets Arzsbok |
|
|
|
Description of John ericsson's 1932 Hot Air | engine. Olaf Berg built this engine 1990 |
|
| Damping in rolling and flexing Seals | Paper |
|
1986 |
|
SAE#869129 |
|
|
|
|
|
| Das Kennfeld des Stirlingmotors(characteristic diagrams of | the Stirling Engine (in German) | Kuhlmann, Peter | 1973 | MTZ Motortech Zeit v34 n5 May 1973 |
|
|
135-139 | tests and calculation results |
|
|
| Data Acquisition User's guide-1 for Fuel/Engine Evaluation | system applied to an experimental Air Stirling Engine | Bingham, T.R.; Webster, G.D. | 1981 | NTIS Technical Note | NTIS#ADA1284041 |
|
45p | In French |
|
|
| Data Buoy powered by a Thermo-Mechanical Generator, A |
|
Cooke-Yarborough, E.H. | 1977 | IECEC 12th Conf. Proceedings |
|
|
1370-1377 |
|
|
|
| Data buoy powered by a Thermo-Mechanical Generator: Results | of a year's operation at sea |
|
1977 | IECEC 12th Conf. Proc. Washington DC | SAE#779230 |
|
|
|
|
|
| D-Cycle Vapor Stirling Engine |
|
Davoud, J.G.; Burke, J. A. | 1976 | D-Cycle Power Systems, Inc. |
|
|
|
4th International Symposium on Auto. Prop. Syst. | Vol 3. Washington, DC |
|
| Ddie Luftmaschine von D.W. van Rennes |
|
Slaby, A. | 1879 |
|
|
|
|
|
|
|
| De Philips-Stirling Motor. |
|
Neelen, G.T.M. | 1967 |
|
|
|
|
|
|
|
| Degrees of Freedom in the layout of Stirling Engines |
|
Feurer, B. | 1973 | Von Karam Inst for Fluid Dynamics feb 12 | Lecture Series No. 53 |
|
|
|
|
|
| DeLamater-Ericsson and DeLamater-Ryder Hot Air Pumping | Engines, Chapter on description and operation |
|
0 |
|
New Catechism of the Steam engine |
|
pp. 319-324 | Section in the book on Hot Air Engines and their | description with drawings, Delamater Iron Works | New York City |
| Delta |
|
Senft, Dr. James R. | 1977 | Model Engineer, Vol 143 |
|
|
1292-1295 |
|
|
|
| Demo Stirling |
|
Meede, Peter | 1988 | Model Engineer, Dec 1988 |
|
|
pp. 699-701 | Discussion of a model Hot Air Engine with | drawings |
|
| Demonstration Martini-Ringbom Stirling Engine, A |
|
Clark, M.A.;Horsted, P.J. | 1984 | IECEC 19th Conf. Proc. |
|
|
|
|
|
|
| Demonstration of a Free-Piston Stirling Linear Alternator | Power conversion system | Goldwater,B.;Morrow,R. | 1977 | IECEC 12th Conf. Proceedings | SAE#779249 |
|
1488-1495 | ERDA Nuclear Research Applications Div& MTI |
|
|
| Demonstration of a Free-Piston Stirling/Linear Alternator | Power conversion system | Pillar, S.J. | 1978 | DOE | C00-2764-002 April 21,1978 |
|
|
|
|
|
| Den Moderna Varmluftsmotorn |
|
Bohr, E. | 1948 | Teknisk Tidskrift | No. 18 |
|
595-599 |
|
|
|
| Denkschrift Electrospeicherfahrzeuge |
|
Meijer, R.J. | 1969 |
|
|
|
|
|
|
|
| Density and frequency effects on the pressure drop across | the regenerator of a Stirling Cycle Machine | Walker, Graham | 1963 | Engineer, London, Vol 216 |
|
|
1063 |
|
|
|
| Der Philips Heissluftmotor |
|
Weinhold, J. | 1963 | Motortechnische Zeit, v24 n12 Dec 1963 |
|
|
447-53 | Phillips thermal engine; principles and mode of | operation; tests undertaken at Phillips Labs. | Examples of various designs |
| Der Philips-Stirlingmotor | (in German) | Meijer, R.J. | 1968 | Motortechnische Zeit, v29 n7 July 1968 |
|
|
284-98 | Discusses the Phillips Stirling Engine;progress | being made and special features | 14 ref |
| Der Stirlingmotor fur Aufgaben der Meerestechnik |
|
Zacharias, F.A. | 1971 | Sonderdruck aus der Zeaitschrift Schiffestechnik | Heft, vol 92 |
|
39-45 |
|
|
|
| Description of a device for measuring oscillating flow loss | Paper |
|
1987 |
|
SAE#879099 |
|
|
|
|
|
| Description of a new and practical form of Hot Air Engine |
|
|
1889 | Engineering News, Sept 14, 1889 Vol. XXII |
|
|
242 |
|
showed that the engine used 2.98 lbs of coke per | BHP and 1.91 lbs per IHP |
| Description of an Oscillating Flow Pressure Drop Test Rig |
|
Wood, J. Gary; Miller, Eric.L. | 1988 | IECEC 23rd Conf. Proc./NASA Lewis Research Center | SAE#889281 |
|
121- | Sverdrup Tech, Gedion Assoc., Sunpower Inc. |
|
|
| Description of an oscillating flow test program | Paper |
|
1987 |
|
SAE#879029 |
|
|
|
|
|
| Description of Heinrici type Hot Air Engine | Catalog | Caldwell Industries | 0 | Caldwell Industries Pub. Luling, TX |
|
|
pg.9 | Small advertisement in Caldwell Industries catalog | for mkodel engines. Photograph |
|
| Description of Stirling's Improved Air Engine |
|
Stirling, James | 1845 | Inst. of Civil Engineers, minutes 1845 |
|
|
|
|
|
|
| Description of the Stirling Cycle in a vector diagram, The |
|
Fokker, H.;van Eekelen, J.A.M. | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug. 1978 | SAE#789112 |
|
1739-1745 |
|
|
|
| Design and Analysis of a Stirling Engine based Cogeneration | System and Gas/Hybrid Small Power Producer FR Oct 85-Jul 86 | Washom, B.J.;Ziph, B.;Godett, T.M. | 1987 | Advanco Corp. f/Gas Research Inst. | NTIS#PB88245873 | GRI50822430791 | 210p Jun 87 | 855,294 |
|
|
| Design and Construction of a Stirling Cycle Engine to drive | a gas furnace circulating blower | Crestwick,F.A.;Mitchell, R.K. | 1962 | Battelle Research Report of Dec 28 |
|
|
|
|
|
|
| Design and Development of a 40 KW Stirling Engine-the | the applications | Nilsson, C.E.H. | 1982 | Inst of Mech. Engineers Conf. on Stirling Engines | Paper #C28/82 |
|
|
|
|
|
| Design and Development of a 40 KW Stirling Engine-the power | system, The | Lundholm, G.K.;Moodysson, B.O. | 1982 | Inst. of Mech. Engineers Conf on Stirling Engines | Paper #C27/82 |
|
|
|
|
|
| Design and Development of a Miniature Stirling Machine |
|
Kagawa, K.;Araoka, K.;Otaka,T. | 1991 | IECEC 26th Conf. Proc. | American Nuclear Society |
|
192-197 | Toshiba Corporation Consumer Products Laboratory |
|
|
| Design and Development of a Miniature Stirling Machine |
|
Kagawa, N.;Araoka, K.; Sakuma, T. | 1990 | IECEC 25th Proc. |
|
|
442-447 | AlChE,6 |
|
|
| Design and Development of Stirling Engines for Stationary | Power Generation Applications...Vol 1, Tech. Report |
|
1981 |
|
NTIS#DOE/ET/15207-T2(V.1) |
|
|
Design and Development of Stirling Engines for | Stationary Power Generation Applications in the | 500 to 3000 HP range. V1. Technical report |
| Design and Development of Stirling Engines for Stationary | Power Generation Applications. Vol 2. Technical report |
|
1981 |
|
NTIS#DOE/ET/15207-T2(V2) |
|
|
Design and Development of Stirling Engines for | stationary Power Generation applications in the | 500 to 3000 HP Range. V2. Program Plan |
| Design and Development of Stirling Engines for Stationary | Power Generation Applic. in the 500-3000 HP range. FR |
|
1981 |
|
NTIS#DOE/ET/15208-T1(v1&v2) |
|
|
Phase 1 Final Report volume 1 and 2 |
|
|
| Design and Development of Stirling Engines for Stationary | Power Generation Applications in the 500-3000 HP range... |
|
1981 |
|
NTIS#DOE/ET/15209-T1 |
|
|
Subtask 1A report:state of the Art Conceptual | design |
|
| Design and Experience with a laboratory Stirling Cycle | Machine |
|
1982 |
|
SAE#829302 |
|
|
|
|
|
| Design and Fabrication of a Stirling Engine heat exchanger | module with an integral heat-pipe, The | Schreiber, Jeffery .G. | 1988 | IECEC 23rd Conf. Proc./NASA Lewis Research Center | SAE#889346 |
|
133-140 |
|
|
|
| Design and initial tests of a Stirling Engine for solar | energy applications | Utz,J.A.; Braun, R.A. | 1960 | Univ. of Wisconsin, Dept of Mech. Eng. |
|
|
|
|
|
|
| Design and performance of a 25KW Free-Piston Stirling space | power demonstration engine |
|
1987 |
|
SAE#879236 |
|
|
|
|
|
| Design and Performance of a 25kWe Free-Piston Stirling | Space Power Demonstrator Engine | Dhar, M.;Hibesm D. et al | 1987 | IECEC Conf. Proc., Phila Aug | SAE#879163 |
|
|
|
|
|
| Design and Performance of the Southern California Edison Sti |
|
Lopez, C.W.; Stone, K.W. | 1992 | ASME, Int. Solar Energy Conf. Vol 2, |
|
|
945-952 |
|
|
|
| Design and simulation investigation of a linear alternator | dynamometer coupled to a Free Piston Stirling Engine |
|
1985 | IECEC 20th Conf. Proc. | SAE#859073 |
|
|
|
|
|
| Design and testing of a Heat Pipe combustion system for the | STM4-120 Stirling Engine | Khalili, K.;Godett, T.M.;Meijer, R.J. | 1989 | IECEC 24th Conf. Proc./ Stirling Thermal Motors | SAE#899540 |
|
2283- | Stirling Thermal Motors, Ann Arbor MI | Stirling Motors Europe BV, Maanweg 156, 2516 AB | The Hague, Netherlands. |
| Design and testing of a second generation solar Stirling | Engine power conversion system |
|
1983 |
|
SAE#839011 |
|
|
|
|
|
| Design and testing of heat exchangers with liquid metal | heat pipes for Stirling Engines | Gonnov, I.V.;Ivanovsky,M.N. | 1991 | IECEC 26th Conf. Proceeding Aug 1991 | SAE#910541 |
|
229-232 | 229-232 |
|
|
| Design Appraisal of a Small Biomass Based Stirling Engine |
|
Magal, B.S.; Gaunekar, A.S. | 1984 | IECEC 19th Conf. Proc. Vol 2, San Francisco |
|
|
|
|
|
|
| Design Characteristics and test results of the United | Stirling P40 engine | Bratt, C. | 1980 | IECEC | SAE#809397 |
|
|
|
|
|
| Design characteristics of an advanced Stirling Engine | concept | Vos, J. | 1979 | IECEC 14th Conf. Proceedings August | SAE#799257 |
|
1186-1190 |
|
|
|
| Design Considerations for Cryogenic Refrigerators |
|
Hogan, W.H.; Stuart,R.W. | 1963 | ASME Paper | Paper No. 63-WA-292 |
|
|
|
|
|
| Design considerations for heat pipe receivers(Stirling | Engine) | Adkins, Douglas | 1990 | Journal of Solar Energy Engineering v112 Aug 90 |
|
|
169-176 |
|
|
|
| Design Considerations on a Thermal Energy Storage Stirling | Engine Automobile | Asselman, G.A. | 1977 | Int. Auto. Engineering Congress Feb. '77 | SAE#770080 |
|
|
|
|
|
| Design Details and Performance Characteristics of some Free- | Piston Stirling Engines | Beale, W.T. | 1973 | IECEC 8th Conf. Proc. Philidelphia, PA | SAE#739077 |
|
190-197 |
|
|
|
| Design Guidelines for Large Stirling Cryocoolers |
|
Walker, Graham | 1983 | Butterworths Scientific Publishers, Guilford, UK |
|
|
|
|
|
|
| Design in 5 stages of a Stirling Cycle Cryogenic Cooling | machine optimized for Maximum coefficent of performance | Organ, A.J. | 0 | Royal Signal and Radar Establishment, Malven, UK |
|
|
|
|
|
|
| Design Integration and test of a Heat Pipe heated 100 | HP Stirling Engine | Merrigan, Micheal;Runyan, J.E. | 1988 | Los Alamos National Laboratory | SAE#889278 |
|
|
|
|
|
| Design of a Heat Pipe for a Free Piston Stirling Engine | Paper |
|
1987 |
|
SAE#879215 |
|
|
|
|
|
| Design of a Hydraulic Output Stirling Engine |
|
|
1983 |
|
SAE#829293 NTIS#N83-22739/7 |
|
|
|
|
|
| Design of a Low Pressure Air Engine for Third World use |
|
Wood, J.G.;Chagnot,B.J.;Penswick, L.B. | 1982 | IECEC 17th Conf. Proceedings | SAE#829288 check number |
|
|
|
|
|
| Design of a Modified Ericsson Type Linkage of the Stirling | Cycle Hot Air Engine MAC-02 | Abenvoli, I.;Carlini, M.;Sciaboni,A. | 1991 | 5th Int. Stirling Engine Conf., Dubrovnik |
|
|
|
|
|
|
| Design of a Pool Boiler Heat Transport system for a 25 KW | Advanced Stirling Conversion system | Anderson, W.A.;Rosenfeld, J.H.;Noble, J. | 1991 | IECEC 26th Conf. Proceedings, Vol. 5 |
|
|
376-381 | Boston |
|
|
| Design of a preprototype Stirling laboratory Research | Engine | Hoehn, F.; McDougal,A.R. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Design of a Pre-prototype Stirling Laboratory research | engine | Hoehn, F.W.;McDougal,A.R. | 1978 | IECEC 13th Conf. Proceedings | SAE#789271 |
|
|
|
|
|
| Design of Hydraulic Output Unit for 15 KW Free-Piston | Stirling Engine |
|
1982 |
|
SAE#829292 |
|
|
|
|
|
| Design of Multihundred Watt Dips for Robotic space Missions |
|
Bents, D.J.;Geng, S.M.;Schreiber, J.G. | 1991 | IECEC 26th Conf\NASA Lewis Research Center | NTIS#N91242321 | NASATM-104401 | 8 |
|
|
|
| Design of Stirling Cycle Engines, The |
|
Senft, Dr. James R. | 1976 | Live Steam Vol 10 Nov 1976 | continues in December issue also |
|
pp. 9-17 | Detailed design criteria for Hot Air | Engines, diagrams and model plans |
|
| Design of the 4-215 D.A. Automotive Stirling Engine |
|
Van Giessel, R., Reinink F. | 1977 | SAE Int. Auto. Eng. Congress Exp. Detroit,MI | SAE#770082 |
|
pp. 319-332 |
|
|
|
| Design of Thermal Regenerators for Stirling type | refrigerators | Harris, W.S; Rios, P.A.;Smith, J.L. | 1971 | Adv. Cryogenic Engineering Vol 16 |
|
|
312-323 |
|
|
|
| Design optimization of Stirling Cycle Cryogenic cooling | engines by digital simulation | Finkelstein, T.; Walker, Graham | 1970 | Cryogenic Engineering Conf., Boulder, CO, June | Paper No. K4 |
|
|
|
|
|
| Design study of a general purpose Stirling test engine |
|
|
1978 | DOE Highway Vehicle Sys. Contractors Coord Meeting |
|
|
|
|
|
|
| Design Study of a Kinematic Stirling Engine for Dispered | Solar Electric Power System |
|
1981 |
|
NTIS#N81-18492/1 |
|
|
|
|
|
| Design Study on a Mult-stage Stirling Cycle Cooler for Space | Applications |
|
1987 |
|
NTIS#N8724528/8 |
|
|
747,695 |
|
|
| Design, development and performance of a duplex Stirling | Natural Gas Liquifier, The | Berchowitz, David M. | 1982 | IECEC 17th Conf. Proceedings | SAE#829295 |
|
|
|
|
|
| Design, Development and Performance of a duplex Stirling | natural gas liquifier | Berchowitz, David M. | 1982 | IECEC 17th Conf. Proc. |
|
|
|
|
|
|
| Design, Fabrication and Test of a Heat Pipe receiver for the | Cummins Power Generation 5 Kwe Dish Stirling system | Dussinger, P.M. | 1991 | IECEC 26th Conf vol 5\Thermacore Inc., Lancaster PA | SAE#910824 |
|
171-176 | Discussing on the results and testing of the | Thermacore Manufactured Heat Pipe system | Thermacore Inc., 780 Eden Rd, Lancaster PA |
| Design, Fabrication and testing of a 15kW Gas fired liquid | metal evaporator | Adkins, douglas; Rawlinson, K. Scott | 1992 | IECEC 27th Proceedings\Sandia National Labs | SAE#929177 |
|
5.191-5.199 |
|
|
|
| Design, Fabrication and testing of a 30 kWt Screen-Wick | Heat Pipe Solar Receiver | Andraka, Charles, | 1992 | IECEC 27th Proceedings\Sandia National Labs | SAE#929176 |
|
5.185-5.190 |
|
|
|
| Designer's Handbook for Spacebourne Two-State Vuilleumier | Cryogenic refrigerators | Leo, B. | 1970 | Air Force Flight Dynamics Laboratory, | AFFDL-TR-70-54 June 70 |
|
|
|
|
|
| Designing of a Stirling Engine for Model Aircraft Propulsion |
|
McConaghy, R.F. | 1986 | IECEC 21st Conf. Proc., Pub. Amer Chem.Soc | SAE#869111 |
|
|
Discussion of building a small Hot Air engine for | a model airplane |
|
| Designs of Terrestrial Solar Electric Generating Sets |
|
Loktionov, Yury V.; Baum, Igor; Gonnov,I | 1993 | IECEC Proceedings | SAE#93023 |
|
|
|
|
|
| Determination of the optimum configuration for a Stirling | Engines | Kirkley, D.W. | 1962 | Jnl of Mech. Eng. Sci. Vol 4 |
|
|
203-212 |
|
|
|
| Determination of the power of a low temperature differential | Stirling Engine | Brenizer, J. | 1991 | University of Wisconsin Research Report |
|
|
|
|
|
|
| Detroit Diesel Corp/Stirling Thermal Motors Program to devel | Stirling based commercial products | Bennethum, James E.;Laymac, T.;Lennart N | 1991 | IECEC 26th Conf. Proc. Vol 5 |
|
|
198-204 | discussion on Detroit Diesel/STC development of | the STM4-120 for commercial sales and applications |
|
| Developement of Stirling Engines at Sunpower Inc. |
|
Berchowitz, David M., Urieli, I. | 1984 | Sunpower Inc. Athens, Ohio |
|
|
|
|
|
|
| Developing the Stirling Engine |
|
|
1971 | Automotive Design Engineer, London Oct. |
|
|
57-58 |
|
|
|
| Developing the Stirling Engine for Fuel economy in Marine, | Industrial and Medium Duty Automotive Applications | Carlqvist, Stig G.;Rosenqvist,K.G. | 1971 | 12th Int. Cong on Combustion Engines CIMAC, Tokyo |
|
|
34p | May 22-June 1 1977 | includes Gummesson, S.G. |
|
| Development and application of a Stirling Heat Pump for | heating | Raetz, H. | 1974 | Brauschweig Sept | PTB-FMRB-57 |
|
|
|
|
|
| Development and Application of an advanced Stirling Cycle | simulation in the design of a high temperature heat pump,The |
|
1987 |
|
SAE#879279 |
|
|
|
|
|
| Development and Demonstration of a Stirling/Rankine Heat | Pump. Phase IIIB, Eng. Technol Devel. Testing. Final Report |
|
1984 | General Electric Co., King of Prussia PA | NTIS#DE85004388 | ORNLSub82174851 | 203p | Advanced Energy Programs Department at GE |
|
|
| Development and Demonstration of a Stirling/Rankine Heat | Activated Heat Pump. Semi-Annual Report July-December 1979 |
|
1981 |
|
NTIS#DOE/CS/20043-T1 |
|
|
|
|
|
| Development and Demonstration of a Stirling/Rankine Heat | Activated Heat Pump |
|
1979 | Jan-June 1979 | COO-2911-5 |
|
132p |
|
|
|
| Development and Demonstration of a Stirling/Rankine heat | Activated Heat Pump | Meijer, Richard C. | 1982 | DOE | CONF-810672 |
|
118-23 | proceedings of the DOE heat Pump Contractorsr | Program Integration Meeting |
|
| Development and Demonstration of a Stirling/Rankine Heat | Activated Heat pump. Phase IIIB Engine Tech. Final Report |
|
|
|
DE85004388 |
|
|
NTIS519529 |
|
|
| Development and evaluation of a modified Stirling cycle | heart engine. Semi-annual report | Bazinet, G.D.;Fraser, R.J.;Hoffman,L.C. | 1972 | Aerojet Liquid Rocket Company, Sacramento CA June |
|
|
|
|
|
|
| Development and Evaluation of a modified Stirling Engine |
|
Martini, W.R. | 1974 | MDCA Quarterly Report | MDC-G4438 |
|
|
|
|
|
| Development and Evaluation of a Pneumatic Left Ventricle | Assist Thermal Energy System |
|
1983 |
|
PB83-163147 |
|
|
|
|
|
| Development and evaluation of a pneumatic left ventricle | assist thermal power system. Annual Report NIH | Andrus, S. | 1976 | NTIS | NO1-HV-3-2930-1 |
|
|
Annual Report National Institute of Health |
|
|
| Development and Evaluation of a Stirling Cycle Engine | Conversion System |
|
1975 |
|
NTIS#PB-239-086/2GI |
|
|
|
|
|
| Development and Performance of a 3 Kw(E) Air Charged Free | Piston Stirling Engine with Linear Alternator | Berchowitz, David M. Richter, M. | 1987 | IECEC AIAA 22nd Conf. Phila, Aug. 1987 | SAE#879216 |
|
pp. 1835-1840 | Results of building and testing a moderate sized | Free-Piston Engine and alternator system build at | sunpower, Inc. |
| Development and testing of a Stirling Cycle machine with | characteristics suitable for domestic refrigeration | Finkelstein, T.;Polanski, C. | 1959 | English Electric Report | Report W/M(3A) |
|
|
|
|
|
| Development Free Piston Stirling Test Bed Engine |
|
|
1980 | SAE | SAE#819784 |
|
|
|
|
|
| Development of 3kw Class Stirling Engine for Heat Pump use |
|
|
1985 |
|
SAE#859023 |
|
|
|
|
|
| Development of a 1 Kw electrical output Free-Piston | Stirling Engine Alternator Unit | Berchowitz, David M. | 1983 | IECEC 18th ConfProc. August 1983 | SAE#839146 |
|
pp. 897-901 |
|
|
|
| Development of a 1 kWe Isotope Fueled Stirling Cycle Power | system | Wiley, R.L.; Lehrfeld, D. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
1858-1864 |
|
|
|
| Development of a 150KW (200HP) Stirling Engine for Medium | Duty Automotive Application. A Status Report | Rosenqvist, N. Gummesson, S. | 1977 | SAE | SAE#770081 |
|
pp. 309-312 | Discussion of design criteria for larger Stirling | power applications |
|
| Development of a 3 KW Free-Piston Stirling Engine with the | Displacer Gas Spring partially sprung to the power unit | Chen, G.;McEntee,J. | 1991 | IECEC 26th Conf. Proc./Sunpower Inc. Athens, OH |
|
|
233-238 | discusses the work done at Sunpower on a small | Free-Piston power unit |
|
| Development of a 3 kW Stirling Engine for a Residential Heat | Pump System | Kagawa, N. | 1988 | Int. Stirling Engine Conference, Tokyo Nov 88 | Paper 001 |
|
|
|
|
|
| Development of a 30 kW Class Stirling Engine Combustor |
|
Ishihara, T. | 1988 | 4th Int. Stirling Engine Conference. Nov. 88 | Paper No. 050 |
|
|
|
|
|
| Development of a Diaphram Stirling Engine heat-actuated | Heat Pump | Ackermann, R.A.;Marusak, T.J. | 1980 | IECEC Record | SAE#809365 |
|
1797-1801 |
|
|
|
| Development of a Flexure Joint for Stirling Engines |
|
Fauvel, O.R.;Thomson, R.;Walker, G. | 1988 | IECEC 23rd Conf. Proc. | SAE#889197 |
|
89-91 |
|
|
|
| Development of a Free Piston Vuilleumier Machine for Cooling | Purposes | Thomas, B.; Schultz, S. | 1991 | Proc. 5th Int. Stirling Engine Conf. dubrovnik |
|
|
|
|
|
|
| Development of a free-Piston vuilleumier Machine for | Cooling purposes | Schultz, S.; Thomas, B. | 1991 | Proc. 5th Int. Stirling Engine Conf. Dubrovnik |
|
|
|
8-10 may 1991 |
|
|
| Development of a Gas-Fired Vuilleumeir Heat Pump for | Residential Heating | Carlsen, H. | 1989 | IECEC 24th Conf. Proc. at Crystal City VA | SAE#899175 |
|
|
Laboratory for Energetics, Technical Univ of | Denmark. |
|
| Development of a High Frequency Stirling Engine powered 3 Kw | Generator Set | Lane, N.W.;Berkowitz,D.;Shade,A. | 1989 | IECEC 24th Conf. Proc V5\Sunpower Inc.,Athens, OH | SAE#899156 |
|
2213-2218 |
|
|
|
| Development of a Large borded Stirling Engine in Japan |
|
Fuyita, H. et al | 1983 | I. Mecne, April 1983 |
|
|
107-112 | 5.454 92 |
|
|
| Development of a Martini-Ringbom Stirling Engine, A |
|
Tattersfield, J.J. | 1985 | Royal Navy Engineering College, Plymouth UK |
|
|
|
BEng dissertation RNEC 1984 |
|
|
| Development of a New 20 kW Gas Fired Heat Pump based on the | Vuilleumier Cycle | Carlsen, H. | 1990 | IECEC 25th Proceedings, Reno, NV |
|
|
|
|
|
|
| Development of a new Solar Stirling Engine |
|
Isshiki,N. | 1990 | 1st International Stirling Engine Conference |
|
|
|
|
|
|
| Development of a non-linear mathematical model for Stirling | Engines | Serrate, O.A.G.;Parise, J.A.R. | 1991 | IECEC 26th Conf./Univ. Catolica do Rio Janeiro |
|
|
320-325 |
|
|
|
| Development of a Quiet Stirling Cycle Multi-Fuel Engine | for Electric Power Generation |
|
1983 |
|
NTIS#AD-A121033/5 |
|
|
|
|
|
| Development of a Residential Free-Piston Stirling Engine | Heat Pump | Ackermann, R.A. | 1988 | MTI f/DOE | NTIS#DE8801291 | CONF880410041 | 8p |
|
|
|
| Development of a Stirling Cycle Machine | Thesis | Wagatsuma, S. | 1973 | Inst. Tech. de Aero Nautica, San Jose dos Campos |
|
|
|
M.Sc. Thesis |
|
|
| Development of a Stirling Cycle Power System for Artificial | Hearts | Buck, K.E. | 1969 | IECEC 4th Conf. Proc. Washington DC Sept 21-26 |
|
|
|
|
|
|
| Development of a Stirling Engine power source for artifical | heart application | Riggle, P.;Noble, J.E.;Emigh, S.G. | 1971 | MDAC Paper | No. WD 1610 September |
|
|
|
|
|
| Development of a Stirling Engine power source for Artificial | Heart Applications: A Program Review |
|
1971 | IECEC Conference Proceedings | SAE#719040 |
|
|
|
|
|
| Development of a Stirling Engine powered Heat Activated Heat | Pump | Auxer, W.L. | 1977 | IECEC 12th Conf. Proc. Washington DC Aug 28-Sept 2 | SAE#779065 |
|
|
|
|
|
| Development of a Stirling Engine Rod Seal |
|
|
1982 |
|
SAE#829311 |
|
|
|
|
|
| Development of a Thermocompressor Power System for | Implantable Artificial heart Application |
|
1973 | IECEC | SAE#739152 |
|
|
|
|
|
| Development of a valved Hot Gas Engine |
|
Smith, J.L. | 1975 |
|
|
|
|
|
|
|
| Development of Five Cylinder Double Acting Stirling Engine | Paper |
|
1987 |
|
SAE#879160 |
|
|
|
|
|
| Development of Free-Piston Stirling Engine Performance and | Optimization Codes based on Martini simulation technique | Martini, William R. | 1989 | Martini Engineering, Richland, WA f/NASA | NTIS#N90183269 |
|
269p |
|
|
|
| Development of Miniature Reciprocating Cryogenic | Refrigerator | Breckenridge, R.W. | 1967 | AFFDL-TR-67-78 |
|
|
|
|
|
|
| Development of New DDHP Air Conditioning Equipment using | Vuilleumier Cycle | Kurosawa, S.; Yoshida, A.;Ogawa, M. | 1990 | Heat Pumps Proceedings 3rd IEA Heat Pump Conf. |
|
|
|
Conference in Tokyo 1990 |
|
|
| Development of new solar Stirling Engine |
|
Isshiki, N. | 1990 | 1st IECEC China 1990-91 |
|
|
|
|
|
|
| Development of NS30A Stirling Engine |
|
Nogawa, N. | 1987 | IECEC AIAA | SAE#879155 |
|
pp. 1797-1802 |
|
|
|
| Development of power sources for blood pump applications |
|
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759180 |
|
|
|
|
|
| Development of Small Scale Stirling Engine Heat Pump System |
|
Suganami, T.; Mori, M.;Fujiwara, T. | 1990 | IECEC 25th Conf. Proc. August 1990 |
|
|
264-267 |
|
|
|
| Development of Stirling Engines |
|
Koizumi, I. | 1976 | Jnl Japanese Soc. Mech Eng. Vol 79 No. 693, Aug |
|
|
|
|
|
|
| Development of Stirling Engines in Sweden |
|
Ortegren, L.G. | 1973 | Conf.on Low Pollution Power Systems Development |
|
|
|
United Stirling Conference held in Ann Arbor, MI | Oct 14-19 |
|
| Development of Stirling Technology in China and Its Pro- | Prospective Role in Solving the Engergy Problem... | Shen, Y; Weiquing, Z.; Liyun, X. | 1984 | IECEC 19th Conf. Proc. Vol 2, San Francisco |
|
|
|
|
|
|
| Development of the 30 kW Class Small size Stirling Engine |
|
Fusso, terada | 1985 | IECEC 20th Conf. Proc. Vol 3 | SAE#859476 |
|
372-377 |
|
|
|
| Development of the CPG 5 KW Dish/Stirling Engine |
|
Bean,J.R.;Kubo,Isoroku | 1990 | IECEC 25th Conf. Proceedings | SAE#906298 | 90-6-298 |
|
Reno, NV |
|
|
| Development of the Small-Power Stirling Engine |
|
Matsue, J., et al. | 1988 | Proc. 4th ICSE |
|
|
13 |
|
|
|
| Development status of an Automotive Stirling Engine |
|
Nightingale, Noel P. | 1986 | Proc. of the Conf."Automotive engine alternatives" | Vancouver, BC Aug. 11-12 |
|
|
|
|
|
| Development towards achievement of a 3-5 year lifetime | Stirling Cycle refrigerator for space applications | Gasser, M.G.;Sherman, A.;Beale, W.T. | 1979 | Proc. Cryo. Eng. Conf. Madison, Wis | Vol 26, 1980, Plenum Press |
|
|
|
|
|
| Development, analysis and testing background of the MOD II | Automotive Stirling Engine | Simetkosky, M.A.; Grandin, A.W. | 1986 | Proc. of the 3rd Int. Stirling Engine Conf. (Rome) | ISEC 86-11-44 |
|
|
|
|
|
| Developments in power systems for transportation |
|
|
1974 | ASME Annual Sympopsium Feb 28- Mar 1 |
|
|
45-57 |
|
|
|
| Developments in Stirling Engines |
|
Martini, W.R. | 1972 | ASME Paper | No. 72-WA-/Ener-9, MDAC Paper WD-1833 |
|
|
|
|
|
| Developments in two dimensional regenerator modeling | Paper |
|
1988 |
|
SAE#889115 |
|
|
|
|
|
| Diaphram defined Stirling Cryocooler Development |
|
Shimko, Martin; Stacy, W.D. | 1991 | IECEC 26th Conf./Creare Inc, Hanover NH |
|
|
160-165 | Progress in defveloping a long life cryocooler for | spaceborn applications. Reviews work in the | past year |
| Diaphram Design for a Thermo-mechanical generator |
|
Cooke-Yarborough, E.H. | 1968 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2021 |
|
|
|
|
|
| Diaphram Stirling Cryocooler Developments |
|
Stacy, W.D. | 1992 | Cryogenics Vol 32 no 2 |
|
|
138-42 | bibliography; illustrations |
|
|
| Diaphram Stirling Engines: Achievements and Future Potential |
|
Cooke-Yarborough, E.H. | 1982 | Proc. of Inst. of Mech. Engineeers Conf. | Univ. of Reading |
|
|
Proceedings of Int. Conf. on Stirling Engines, | Reading England March 82, sponsored by Inst of | Mech. Engineers |
| Die Feuerluiftmaschine |
|
Slaby, A. | 1889 | Z. Verb dt Ing. Vol 33 No. 5 Sonnabend Feb 2 |
|
|
|
|
|
|
| Digital Simulation of Stirling Engines |
|
Berkowitz and Urielli | 1983 | Adam Hilger |
|
|
|
|
|
|
| Dilated Air Motive Engine | Description of engine | Giffard, P. (Paris, France) | 1881 | Engineering Sept 23, 1881 |
|
|
pg. 300 | Description of engine |
|
|
| Dimensional analysis of pumping losses in a Stirling Cycle | Machine |
|
1982 |
|
SAE#829279 check number |
|
|
|
|
|
| Directions in Automotive Engine Research and Development |
|
|
1980 |
|
CONF800212-2 |
|
|
|
|
|
| Dish Stirling Commercialization Workshop Summary |
|
Schaefer, J. | 1989 | Electric Power Research Inst. Aug. 1989 |
|
|
|
|
|
|
| Dish Stirling Solar Receiver Program |
|
|
1981 |
|
NTIS#N81-16574/8 |
|
|
|
|
|
| Displacer spring effects in Ringbom-Stirling Engines |
|
|
1986 | IECEC 21st Conf. Proc. | SAE#869126 |
|
|
|
|
|
| DOE Stationary External Combustion Engine Program | Status report | Holtz, R.E.; Marciniak, K.L., Uherka, L. | 1979 | IECEC 14th Conf. Proceedings Vol 1 Boston, MA |
|
|
|
|
|
|
| DOE/NASA Automotive Stirling Engine Project Overview 1983 |
|
Beremand, Donald G. | 1983 | NASA Lewis Research Center f/DOE | NTIS#DE83013435 | NASA-TM83405 | 16p | IECEC Conf 21 Aug 83 Orlando FL | CONF83081230 | SAE#839057 |
| DOE/NASA Automotive Stirling Engine Project Overview 1986 |
|
Beremand, Donald G.;Shaltens, Richard K. | 1986 | IECEC 21st Conf. Proc. Vol. 1 Aug. 21, 1986 | SAE#869099 |
|
430-438 |
|
|
|
| Double acting Free-Piston Stirling Engine |
|
Walker, Graham | 1978 | Invention disclosure document Feb. |
|
|
|
|
|
|
| Double Acting Stirling Engine with the inner Heat exchangers |
|
Alexandravichus, T.A. | 1992 | IECEC 27th Proceedings\Lithuanian Acad of Science | SAE#929398 |
|
5.449-5.454 |
|
|
|
| Downsizing Assessment of Automotive Stirling Engines |
|
Knoll, R.H.; Tew, Roy C. | 1983 | NASA Lewis Research Center f/DOE | NTIS#DE84005060 | NASATM-83468 | 39p | NTIS#84149897 |
|
|
| Duet for Hot Air and Gramaphone |
|
Bomford, M. | 1975 | Motor Boat and Yachting Aug 1 |
|
|
30-31 |
|
|
|
| Duplex Stirling Gas-Fired Heat Pump. Phase 2. Breadboard | Demonstration Final Report May 81-Nov 82 | Gedeon, David.; Penswick, B.;Beale, W.T. | 1982 | Sunpower Inc Athens. OH f/Research Inst | NTIS#PB85170421 | GRI830040 | 76p |
|
|
|
| Duplex Stirling Machines |
|
Penswick, L.B., Urieli, I. | 1984 | IECEC 19th Conf. Proceedings | SAE# |
|
|
|
|
|
| Duplex Vacuuum Hot Air Engine |
|
Ross, A. | 1978 | Model Engineer Vol 144, Nol 3595, Oct. 20 |
|
|
1229-1233 |
|
|
|
| Dutch on the way to a pollution free engine |
|
|
1970 | Business Week Jan 10, |
|
|
52-53 |
|
|
|
| Dynamic Analysis of Free Piston Stirling Engines by Modal | transformation Method | Carlini, M.;Kucharski,T. | 1986 | SAE Intl. Congress and Exposition, Detroit Feb 24 |
|
|
24-28 |
|
|
|
| Dynamic Analysis of Free-Piston Stirling Engine/Linear | Alternator-Load System-Experimentally validated | Kankam, M.D.;Rauch, J.;Santiago, W. | 1992 | IECEC 27th Proceedings\NASA Lewis\Sverdrup Tech. | SAE#929265 |
|
5.315-5.323 |
|
|
|
| Dynamic analysis of the Fluidyne |
|
West, Colin D. | 1983 | IECEC 18th Conf. Proc./Oak Ridge Nat. Lab f/DOE | NTIS#DE83017283 | CONF83081249 | 27p |
|
|
|
| Dynamic Analysis of the Fluidyne |
|
West, C.D. | 1983 | IECEC 18th Proceedings\Oak Ridge Nat. Laboratory | SAE# |
|
|
|
|
|
| Dynamic behavior and Load Matching Analysis of the Mark II | Free-Piston Stirling Engine Heat Pump | Vincent, Ronald J. | 1992 | IECEC 27th Proceedings\MTI Inc. | SAE#929034 |
|
5.87-5.92 |
|
|
|
| Dynamic behavior Prediction of Free-Piston Stirling Engines |
|
Benvenuto, G.;de Monte, F.;Farina, F. | 1990 | IECEC 25th Conf. Proc. |
|
|
346-351 |
|
|
|
| Dynamic behavior Prediction of Free-Piston Stirling Engines |
|
Benevenuto, G. | 1990 | IECEC conf. Proc. |
|
|
346-351 |
|
|
|
| Dynamic Behavior Prediction of free-Piston Stirling Engines |
|
Benvenuto, G.;de Monte, F.;Farina F. | 1990 | IECEC Conf. Proceedings |
|
|
346-351 |
|
|
|
| Dynamic characteristics concerned in the design of a Free- | Piston Stirling Engine/Magnetic coupling compressor system | Chen, G. | 1989 | Sunpower Inc, Athens, Ohio | SAE#899110 NTIS#DE89015981 |
|
|
|
|
|
| Dynamic Characteristics concerning in the design of a Free- | Piston Stirling Engine/magnetic coupling compressor system | Chen, G. | 1989 | IECEC 24th Conf. Proc Vol 5 Aug 89 | SAE# 899110 NTIS#DE89015981 |
|
2119-2223 | 007,647 |
|
|
| Dynamic effects of the Rhombic Drive for miniature cooling | engines | Walker, Graham | 1968 | Proc. of Cryogenic Engineering Conference v14 | Paper 1-5 Advancement of Cryogenic Engineering |
|
370-7 | Conference held at Cleveland OH. Aug 19-21 1968 | discusses use of cryogenic cooling requirements | and the rhombic drive in cryogenic coolers |
| Dynamic Modeling of Gas Springs |
|
Kornhauser, A.A. | 1991 | IECEC 26th Conf. Proc./ Virginia Polytech Inst. | American Nuclear Society |
|
176-179 |
|
|
|
| Dynamic performance of a theromodynamic cycle using a | chemically reactive gas | Wolgemuth, C.H. | 1969 | IECEC 4th Conf. Proc. |
|
|
599-605 |
|
|
|
| Dynamic Performance of the Thermal Regenerator |
|
Cerqueira-Lima, A.R. | 1969 | Inst. Technologico de Aeronautica, |
|
|
|
Instituto Technologico de Aeronautica, Jose dos | Compos, Masters Thesis |
|
| Dynamic response of pressure transmission Lines in the | research of Helium-Charged Free Piston Stirling Engines | Miller, E.L.; Dudenhoefer, J.E., | 1989 | IECEC 24th Conf. Proc. Washington DC(NASA) | NTIS#N89245930 |
|
8p |
|
|
|
| Dynamic Seals in Stirling Engines |
|
Theeuwes, G.J.A. | 1979 | DOE Hwy Veh. Syst. Cont. Coord Mtg, April 24-26 |
|
|
289-297 |
|
|
|
| Dynamic simulation of the Miniature Free-Piston Stirling | Engine being designed as a power source for Artifical Heart | Bennett, A.;Johnston, R.P. | 1979 | Summer Computer Simulation Conference, Toronto |
|
|
|
|
|
|
| Dynamical Effects of the Rhombic Drive for Miniature | Cooling Engines | Walker, Graham | 1969 | Adv. in Cryogenic Engineering vol 14 |
|
|
370-377 |
|
|
|
| Dynamics and Control of Stirling Engines in a 15 KWe Solar | Electric Generation Concept | Das, R.L.; Bahrami, K.A. | 1979 | IECEC 14th Conf. Proc. |
|
|
133-138 |
|
|
|
| Dynamics of the Ross-Stirling Engine |
|
Walker, Graham., Doige, A.G. | 1986 | University of Calgary, Dept of Mech Eng. | NTIS#DE90012564 |
|
|
057,045 |
|
|
| Dynamics of the Sun-Mill |
|
Ikuta | 1981 | Japanese Journal of Applied Physics | v20, n.4 |
|
pp. 763-768 |
|
|
|
| Easily set up Regenerator |
|
Tanaka, M.;Chisaka, f. | 1986 | 3rd Int. Stirling Engine Conf. vol. 1 (Rome) | ISEC 86-IV-6 |
|
295-307 |
|
|
|
| ECA Indirectly Heated Stirling Engine, The |
|
|
1983 | SAE | SAE#839138 |
|
|
|
|
|
| Economics of Ericsson's Hot Air Engine |
|
|
1887 | American Engineer, Jan. 30, 1885 |
|
|
|
|
|
|
| ECUT energy Data Reference Series: High Temperature Material | for Advanced Heat Engines | Abarcar, R.B.; Hane, G.J. | 1984 | Battelle Pacific Northwest Labs, Richland WA f/DOE | NTIS#DE84015352 | PNL5193 | 19p | given at Int. Stirling Engine Conf Shanghai China | 12 June 84 | CONF84061691 |
| Effect of bottom end temperature on the performance | of Stirling Engines, The | Reader, G.T.;Barnes, C. | 1988 | IECEC 23rd Conf. Proc. | SAE#889350 |
|
157-162 | RNEC |
|
|
| Effect of Material Properties on the Thermal Efficiencies | of the Minto Solar Wheel | Lindsey, | 1980 | ASME Journal Engineering for Power v103 n2 | April 1980 |
|
pp. 504-507 |
|
|
|
| Effect of regenerator matrix arrangements on the performance | of a gas refrigerating machine | Emerson, D.C. | 1959 | B.Sc. Hons Thesis, Durham, Univ. |
|
|
|
|
|
|
| Effect of Suspended Particles on Stirling Engine Performance |
|
Parry, David L. | 1993 | IECEC 28th Conf. Proceedings | SAE#93277 |
|
2.771 |
|
|
|
| Effect of transition on oscillation flow losses in Stirling | Engine coolers and heaters | Seume, J.R.;Simon, T.W. | 1988 | IECEC 23rd Conf. Proc./Univ of Minn. | SAE#889283 |
|
127-132 | From Heat Transfer Laboratory |
|
|
| Effect of Water on Hydrogen Permeability. |
|
Hulligan, D.D.;Tomazic, W.A. | 1984 | NASA Lewis Research Center f/DOE | NTIS#N85148641 NASATM-88898 | NASATM-86904 | 14p | Presented at 22nd Automotive Tech Develop. | Contractors Coordination Meeting Dearborn MI | Oct 26 1984 |
| Effect of water on permeation by Hydrogen: Water vapor in | the working fluid equilibrates with permeability... |
|
1989 | NASA Washington, NTIS Tech Note | NTIS#NTN890330 |
|
1p | A report describes a study of the effects of water | on the permeation of heater head tubes by hydrogen | alloy CG-27 selected as the tube material. |
| Effective use of Hydrogen in Stirling Engines | Paper | Alger, Donald L. | 1988 | IECEC 23rd Conf. Proc. Vol. 1. Alger Stirling Co | SAE#889196 |
|
|
Alger Stirling Company, POB 35306, Cleveland OH | 44135 |
|
| Effects of an Improved Hot regenerator on the Performance of | a Vuilleumier Heat Pump | Carlsen, H.; Kuhl, H.D.;Schultz, S. | 1993 | 6th Int. Stirling Engine Conf., Eindhoven |
|
|
|
|
|
|
| Effects of Displacer Seal Clearance on Free-Piston Stirling | engine performance |
|
1982 |
|
SAE#829312 |
|
|
|
|
|
| Effects of Heat Conduction in Matrix on the Stirling Engine | Regenerator Performance (in Japanese) | Hamaguchi, K. | 1990 | Hokkaido Polytechnic College | No. 8 |
|
|
|
|
|
| Effects of heat Exchanger Dimensions on the MAC-02 Stirling | Engine Performance | Abenavoli, Impero; Carlini,R.;Kormanski | 1993 | 6th Int. Stirling Engine Conf. Eindhoven |
|
|
|
|
|
|
| Effects of Heat Transfer on Gas Springs, The |
|
Kornhauser, AS.A.; Smith, J.L. | 1991 | IECEC 25th Conf. Proc. | SAE#910171 |
|
|
|
|
|
| Effects of Higher Hharmonics on the preliminary design of | Rhombic Drive Stirling Engines | Hooper,C.; Reader, Graham | 1979 | IECEC 14th Conf. Proc. | SAE#799235 |
|
|
|
|
|
| Effects of Pressure Drop Correlations on Stirling Engines | Predicted Performance | Chen, N.C.J.; Griffin, F.P. | 1983 | IECEC 18th Conf. Proc./Oak Ridge Nat. Labs f/DOE | SAE#839114 NTIS#DE83017279 | CONF83081252 | 6p |
|
|
|
| Effects of Regenerator Size on Stirling Engine performance |
|
Hamaguchi, K.;Hiratsuka,Y.;Miyabe, H. | 1991 | IECEC 26th Conf. Proceedings |
|
|
293-298 |
|
|
|
| Effects of using a two phase two component working fluid | in a Stirling Engine. |
|
1983 | SAE | SAE#839148 |
|
|
|
|
|
| Effects of Water on Hydrogen Permeability |
|
Hulligan, D | 1987 | NASA | NTIS#N8716664/1 | NASATM-88898 |
|
|
|
|
| Effects on control of displacer motion on Ringbom-Stirling | Engine performance |
|
1985 |
|
SAE#859266 |
|
|
|
|
|
| Efficiency Terms for Stirling Engines |
|
Crowley, J.L. | 1983 | Oak Ridge National Laboratory f/DOE June 83 | NTIS#DE83014670 | ORNLCON131 | 30p |
|
|
|
| Efficient Thermo-Mechanical Generation of electricity from | the heat of radioisotopes |
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759150 | AERE-R8036 |
|
|
|
|
| Electromagnetic Compatibility characterization of a BAe | Stirling Cycle Cryocooler for Space application | Johnson, D.L.;Ross, R.G. | 1991 | Adv. Cryogenic Engineering Vol 37B |
|
|
|
|
|
|
| Electromechanical Means of implementing self-acting gas | bearings within Free-Piston Stirling Cycle Machinery | Brunson, Gordon | 1989 | IECEC 24th Conf. Proc. | SAE#899047 |
|
2277- | Center for electromechanics, Univ. of Texas, | Austin |
|
| Elementary Design Guidelines for Stirling Engines |
|
Walker, Graham | 1979 | IECEC 14th Conf. Proceedings, Boston, MA Aug. 1979 | SAE#799230 |
|
1066-1068 |
|
|
|
| Emission Characteristics of Stirling Engines and other | engines | Davis, Stephen R.;Naeim, A. | 1972 | Wayne State Univ, College of Engineering Detroit | SAE#729134 |
|
|
7th IECEC Conf. Proc San diego, CA |
|
|
| Emission Measurement techniques for non conventional power- | plants | Korth, M.W.; Ashby, H.A. | 1972 | IECEC 7th Conf. Proc. Ann Arbor, MI |
|
|
|
|
|
|
| Emissions from continuous combustion systems |
|
|
1972 | General Motors Research Lab. Sept 27-28 |
|
|
|
published by Plenum Press 1971 |
|
|
| Energy Conversion and Storage Technology: Annual Report |
|
|
|
|
DE86900209 |
|
|
616895 |
|
|
| Energy Conversion Devices for ground transportation |
|
Leeth, G.G. | 1969 | IECEC 4th Conf. Proc. Washingnton, DC |
|
|
933-939 |
|
|
|
| Energy Converter utilizing a modified Stirling Cycle |
|
Schuman, M. | 1975 |
|
|
|
|
|
|
|
| Energy for Rural Development |
|
Beale, William T. | 1980 | National Academy of Science |
|
|
|
Early paper by Beale |
|
|
| Energy Related Application of Helium |
|
Hammel, E.F.,Krupka M.C. | 1980 |
|
LA-8455-MS Aug. 1, 1980 |
|
|
|
|
|
| Energy Source Selection for Stirling Eengine drigven AUV's |
|
Potter, I.; Reader, G.;Walker, G. | 1992 | IECEC 27th Proceedings\Univ. of Calgary | SAE#929404 |
|
5.483-5.488 |
|
|
|
| Energy Storage Materials for solar dynamic systems |
|
|
1985 |
|
SAE#859302 |
|
|
|
|
|
| Energy Systems of extended endurance in the 1-100 kW range | for undersea applications | Chapman, R. | 1968 | National Academy of Sciences, Washington, DC | Publication 1072 |
|
|
|
|
|
| Engine Performance. Site review sub committee for Pneumatic | Left Ventricle Assist Thermal Power System Program Review | Hoffman, L.C. | 1976 | May, Sacramento, CA |
|
|
|
|
|
|
| Engine with External heating and method of peration of the e | engine with external heating | Alexandravichus, T.A. | 1990 | russian Pat of March 1, 1990 | #1574879 |
|
|
|
|
|
| Engineering know-how in engine design, part 21:Steam power, | gas turbines,electric cars, stirling engines |
|
1973 | Society of Automotive Engineers, NY 1973 | SAE Special publication No. 379 |
|
|
|
|
|
| Engineering Model Cryocooler Test Results |
|
Shimko, Martin; Stacy, W.; McCormick, J. | 1992 | IECEC 27th Proceedings\ Creare Inc. | SAE#929033 |
|
5.81-5.86 |
|
|
|
| Engineering Prototype--Final desing review held at NASA | Lewis research enter for Stirling Technology Co | STC | 1991 | Stirling technology Co |
|
|
|
|
|
|
| Enhanced Design for a Miniature Stirling Machine |
|
Kagawa, Noboru;Araoka, K.;Otaka, T. | 1992 | IECEC 27th Proceedings\Toshiba\Nat. Defense Acad | SAE#929391 |
|
5.423-5.429 |
|
|
|
| Entwicklung und experimentelle Untersuchung einer | Freikolen-Vuilleumier Kaltemaschine | Thomas, B. | 1992 | University of Dortmund, Dissertation |
|
|
|
|
|
|
| Environmental characteristics of Stirling Engines and their | present state of development in Germany and Sweden | Alm, C.B.S.; Carlqvist, Stig. G. | 1973 | 10th Inter. Congress on Combustion Engineering | Paper #28 |
|
|
April 5-9 Washington DC |
|
|
| Equilibrium performance of the theoretical Stirling Cycle | with a chemically reactive gas as the working fluid. The | Wolgemuth, J.S. | 1968 | Ph.D. Thesis, Ohio State University |
|
|
|
|
|
|
| Ergo II(model) | A 19cc V2 Marine Rider Engine | Robbins, R.S. | 1981 | Model Engineer, 5 June 1981 | continued in 3 July issue, pg 813 |
|
pp. 680-682 | Model Hot Air Engine, drawings |
|
|
| Ericsson's Duplex Caloric Pumping Engine | Article(describes a 2 cylinder engine) |
|
1881 | Engineering, London, April 15, 1881 |
|
|
pg. 328 | Article on John Ericsson's two cylinder engines | that were being built in Glasgow | drawing |
| Ericsson's New patent Caloric Pumping Engine |
|
|
1881 | Engineering News, Jan 29, 1881 |
|
|
|
Advertisement that ran for a considerable period | of time with a drawing of the pumping engine and | a listing of prices, C.H. DeLameter & Co, NY |
| Estimated power output and efficiency of a thermo-mechanical | generator | Cooke-Yarborough, E.H. | 1968 | Harwell Atomic Energy Research Establishment | Harwell Report#5750 |
|
|
|
|
|
| Estimated size and performance of a Natural gas fired duplex | Stirling for domestic refrigerator applications | Berchowitz, David M.; | 1991 | Oak Ridge National Laboratory f/DOE |
|
CONF9108034 | 22 |
|
|
|
| European Progress with Stirling Engines |
|
Moon, J.R. | 1972 | Diesel and Gas Turbine Progress, Sept-Oct |
|
|
74-77 |
|
|
|
| Evaluation of a magnetic coupling for hermetic power | transmission in a Stirling Rankin Heat Pump |
|
1988 | IECEC 23rd Conf. Vol 1, Aug 88 | SAE#889040 |
|
33-37 |
|
|
|
| Evaluation of a Stirling Engine Heater Bypass System at NASA | Lewis Nodal Analysis performance Code |
|
|
|
N86-31452/3 |
|
|
657147 |
|
|
| Evaluation of Alternate-Fuels performance of Combustion | System. Final Report |
|
|
|
DE86004901 |
|
|
620428 |
|
|
| Evaluation of alternative power sources for low emission | automobiles | Bjerklie, J.W.;Cairns, E.J.;Tobias, C.W. | 1975 | National Academy of Sciences Report, Wash. DC | SAE#750929 |
|
|
may also be a 1973 report |
|
|
| Evaluation of Candidate Stirling Engine Heater Tube Alloys | for 1000 hours at 760 degrees C. | Misencik, J.A. | 1980 | NASA | DOE/NASA1040-18 Nov 1980 | NASATM-81578 |
|
|
|
|
| Evaluation of Candidate Stirling Engine Heater Tube Alloys | after 3500 hours exposure to High Pressure doped Hydrogen | Misencik, J.A. | 1984 | NASA Lewis Research Center | NTIS#N84346030 | NASATM-83782 | 46p | NTIS512635 |
|
|
| Evaluation of Candidate Stirling Engine Heater Tube alloys | after 3500 hrs exposure to high press. Hydrogen or Helium FR | Misencik, J.A.;Titran, R.H. | 1984 | NASA Lewis Research Center f/DOE | NTIS#DE85001433 | NASATM-83782 | 44p | Final Report |
|
|
| Evaluation of Candidate Stirling Engine Heater Tube Alloys | at 820 and 860 exp 0 C. | Misencik, J.A. | 1982 | NASA Lewis Research Center f/DOE | NTIS#DE82019785 | NASATM-82837 | 41p | DOENASA5104039 |
|
|
| Evaluation of Candidate Stirling Engine Heater Tube Alloys | for 1000 hours at 760 deg C |
|
1981 |
|
NTIS#N81-15068/2 |
|
|
|
|
|
| Evaluation of CO sub 2 and CO Dopants in Hydrogen to reduce | Hydrogen permeation in the S.E. Heater Heat tube alloy CG-27 | Misencik, J.A. | 1983 | NASA Lewis Research Center | NTIS#DE84005397 | NASATM-83535 | 32p | Jul 83 |
|
|
| Evaluation of Displacement-Time characteristics of Stirling | Engine Drive Mechanisms-II | Narasimhan, M.V.; Adinarayan, T.V. | 1991 | IECEC 26th Conf. Proceedings |
|
|
336- | Professor, Dept of Mechanical Engineering, Indian | Institute of Science, Bangalore, 560012(INDIA) |
|
| Evaluation of Dopants in Hydrogen to Reduce Hydrogen | Permeation in Candidate Stirling Engine | Misencik, J.A. | 1982 | NASA | Oct 1982 | NASATM-82920 |
|
|
|
|
| Evaluation of Dopants in Hydrogen to reduce Hydrogen | permeation in Candiate SE Heater head tube alloys... | Misencik, J.A. | 1982 | NASA Lewis Research Center f/DOE | NTIS#DE83005755 | NASATM-82920 | 21p |
|
|
|
| Evaluation of Dopants in Hydrogen to reduce Hydrogen Perme- | ation in Candidate Stirling Engine Heater Head Tube Alloys.. |
|
1983 |
|
NTIS#DE83005755 | N83-13232/4 |
|
Evaluation of Dopants in Hydrogen to reduce Hydro- | gen Permeation in candidate Stirling Engine Heater | Head Tube Alloys at 760 Deg and 820 Deg |
| Evaluation of Helium as a refrigerator for a Stirling | Cycle Machine | El-Attar, A.A. | 1976 | M.Sc Thesis, Kings College, London |
|
|
|
|
|
|
| Evaluation of isothermalized Stirling Engines |
|
Martine, W.R.;Hauser, S.G. | 1977 | IECEC 12th Conf. Proc. Washington, DC |
|
|
1496-1503 |
|
|
|
| Evaluation of potential Military Applications of Stirling | Engines. Final Report Jan-Jun 88 | Oelrich, I.C.;Riddell, F.R. | 1988 | Institute for Defense Analyses, Alexandria, VA | NTIS#ADA2010007 | IDAP2118 | 89p Jul 88 |
|
|
|
| Evaluation of power Control Methods for Free-Piston | Stirling Engine Driven Heat Pumps | Griffin, F.P.;domingo, N.,;Chen, F.C. | 1987 | Oak Ridge National Labs f/DOE | NTIS#DE87010597 | CONF87080410 | 18p |
|
|
|
| Evaluation of Power Control Methods for Free-Piston Stirling | Driven Heat Pumps |
|
1987 |
|
NTIS#DE87010597 |
|
|
757,277 |
|
|
| Evaluation of practicability of a radioisotope thermal | converter for an artificial heart device | Westinghouse | 1972 | Westinghouse Electric Corp |
|
|
|
Phase 1 and 2 Final report |
|
|
| Evaluation of Stirling Engine appendix gap losses |
|
|
1986 |
|
SAE#869123 |
|
|
|
|
|
| Evaluation of the Free Piston Stirling Cycle for Domestic Co |
|
Fabien, M.J. | 1991 | 18th Int. Congress of Refrigeration Aplications |
|
|
839-843 |
|
|
|
| Evaluation of the STM4-120 Kinematic Stirling Engine |
|
Linker, Kevin L.; Rawlinson, K.Scott | 1990 | Sandia Laboratory f/DOE | NTIS#DE90013836 | SAND900009C | 7 | 063,348; 90-6-303 |
|
|
| Evaluation, analysis and Documentation support for the 10 Kw | Signature Suppressed Electric Energy Plant(SLEEP) |
|
1988 |
|
NTIS#AD-A194899/1 |
|
|
853,301 |
|
|
| Evolution of the Heat Engine |
|
Kolin, Ivo | 1972 | Longmans, London |
|
|
|
|
|
|
| Examples of Steam, Air & Gas Engines of the most recent | approved types | Bourne, John | 1878 | Longmans, Green and Co.,London |
|
|
|
Plans and drawings of various engines of the | period. |
|
| Excitation of a Fluidyne Tuning Line |
|
Fauvel, O.R.; Walker, G.; Reader, G. | 0 | Univ. of Calgary, Dept. of Mech. Eng. |
|
|
|
Discussion of the advantages of liquid feedback | to reenergise the displacer motion of the Fluidyne | Engine. |
| Exhaust Emissions characteristics of hybrid heat engine/ | electric vehicles | Hinton, M.G.; Lura, T.;Roessler, W.U. | 1971 | SAE-Oct 26-27 | SAE#710825 |
|
|
|
|
|
| Experience with implanted radioisotope fuelled artificial | hearts | Keller, F.R.; Martini, W.R.;Rudnicki, M. | 1972 | Proc 2nd Int Symp on Power for Radioisotopes | Paper EN/IB/10 |
|
730-761 | given in Madrid May 29-June 1 |
|
|
| Experiences in the commisioning of a prototype 20 KW helium | charged Stirling Engines |
|
1982 |
|
SAE#829297 |
|
|
|
|
|
| Experimental Analysis of a Low-Speed Heat Engine |
|
Burjaili, M.M. | 1988 | Proc. 1st World Conf on Exp. Heat Transfer | Dubrovnik, Sept 1988 |
|
pp 1734-1740 |
|
|
|
| Experimental and Computational Evaluations of Isothermal | Stirling Cycle Engines | Martini, W. R.; Hauser, S.G. | 1977 | IECEC 12th Conf. Proceedings | SAE#779250 |
|
1496-1503 | Joint Center for Graduate Studies, Univ of Wash. | and Brigham Young Univ. Provo, UT |
|
| Experimental Assessment of Advanced Stirling Component | Concepts | Ziph, B. | 1985 | Stirling Thermal Motors, Inc. | DOE/NASA/0351-1 Oct 1985 | DE86009863 |
|
NTIS642390 |
|
|
| Experimental Determination of Friction Factor for flow | Annular Channels fill with fins or Wire Mesh Matrices | Sodre,J.R. | 1991 | Univ. Catolica do Rio de Janiero Mech Eng Dept/ |
|
|
|
|
|
|
| Experimental Efforts in Stirling Engine Development |
|
Buck, K.E. | 1968 | ASME Paper | No. 68-WA/Ener-3 |
|
|
|
|
|
| Experimental evaluation of a Jet-Stream Fluidyne |
|
Thwaites, G. | 1979 | Royal Navy Engineering College | RNEC-SERG-5-79 |
|
|
|
|
|
| Experimental Evaluation of Catalytic Combustion with heat | removal at near Stoichiometric Conditions |
|
1981 | NASA | NTIS#DOE/NASA/51040-23 |
|
|
|
|
|
| Experimental Evaluation of Engine Driven Heat Pump Systems | Final Report | Maxwell, B.R.; Didion, D.A. | 1978 | National Bureau of Standards, Washington DC | NTIS#PB85120657 |
|
18p |
|
|
|
| Experimental Evaluation of Working Gas Containment in the | Automotive Stirling Engine | Cairelli, J.E. | 1983 | Proc 21st Auto. Tech Dev. Contractors | Coordination Meeting Dearborn Nov 1983 |
|
|
|
|
|
| Experimental measurements of enhanced heat transfer in a | Stirling Engine model with interleaving fins |
|
1981 |
|
SAE#819794 check number |
|
|
|
|
|
| Experimental performance of a Free-Piston Stirling Cycle | Cooler for non-CFC Domestic Refrigeration Applications | Berchowitz, D.M.;Unger, R. | 1991 | 18th Int. Cong. of Refrigeration, Montreal |
|
848-852 |
|
|
|
|
| Experimental performance of the Free Piston Stirling Cycle | for Domestic Cooling Applications | Berchowitz, David M., Unger, R. | 1991 | 18th Int. Congress of Refrigeration Applications |
|
|
848-852 |
|
|
|
| Experimental Prototype of a Heat Actuated Vibrator |
|
Finkelstein, T. | 1964 | Atomics Internationsl Technical Data Record. | AI-64-TDR-21 Jan 30, 1964 |
|
|
|
|
|
| Experimental Research of a Single Acting Small Stirling | Engine | Toraichi, Suyama | 1981 | Bulletin of Marine Engineering Soc. of Japan V 9 |
|
|
35-44 |
|
|
|
| Experimental Results on Laboratory Model Fluidyne |
|
Goldberg, L.F.; Rallis, A.J. | 1977 | IECEC 12th Conf. Proceedings | SAE#779255 |
|
|
|
|
|
| Experimental Studies on small Stirling Engines of | different types | Isshiki, N.,Terada, F.,Katsuji, K. | 1983 | IECEC 18th Proceedings\Tokyo Inst. of Tech, Meguro | SAE#839137 |
|
838- | Toky Inst of Tech, Tokyo,;Sanyo Elect co., Gumma,; | Sanden Corp. Gumma, Japan |
|
| Experimental Study of an Integral Catalytic Combustor: Heat | Exchanger for Stirling Engines | Bulzan, D.L. | 1982 | NASA Lewis Research Center f/DOE | NTIS#DE82011332 | NASATM-827883 | 21p | SAE Int congress and exposition Detroit MI Feb 82 | CONF8202033 |
|
| Experimental Study of the Senft/New Machine Co. Ringbom | Engine | Fauvel, G.R.; Walker, G.;Reader,G. | 1991 | IECEC 26th Conf. Proc. /American Nuclear Society |
|
|
267-271 |
|
|
|
| Experimental Study on the Stirling Refrigerator |
|
Shin, D.K.; Cho, K.S. | 1993 | Proc. of 6th Int. Stirling Engine Conf. 1993 |
|
|
|
|
|
|
| Experiments on a small thermal regenerator. General | discussion on Heat transfer | Davies, S.J.;Singham, J.R. | 1951 | Inst. of Mech Engineers, London |
|
|
434-435 |
|
|
|
| Experiments on bench-scale heat pipe solar receiver |
|
Adkins, D.R. | 1990 | Sandia Laboratories f/DOE | NTIS#DE90013806 | SAND901779C | 18 |
|
|
|
| Experiments on High Power Hot Gas Engines |
|
Van Witteveen, J.O. | 1962 | Philips Technical Review | Rev., 24 |
|
pg. 409 |
|
|
|
| Experiments on high power Hot Gas Engines |
|
van Witteveen, R.A. | 1962 | Philips Technical review, No 24, |
|
|
409 |
|
|
|
| Experiments with Plunging Cylinder Liquid Piston | Stirling Engines | Tailer, Peter | 1989 | Windward Farm Museum, Vineyard Haven MA | SAE#899062 |
|
|
|
|
|
| Experiments with the external combustion Fluidyne Engine, | which has liquid pistons | Walker, Jearl | 1985 | Scientific American, April 1985 V252 |
|
|
140-144 | From the Amatuer Scientist section, describes | building a Fluidyne engine, diagrams and drawings |
|
| Exploratory Development of gas springs as applied to | rotary-reciprocating cryogenic coolers | McCullough, J.E. | 1967 | Air Flight Dynamics Laboratory | AFFDL-TR-76-62 |
|
|
|
|
|
| Exploratory study of the Rainbow variant Stirling Cycle | Engine | Burn, K.S.; Walker, G. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept | SAE#769262 |
|
|
|
|
|
| Extension of the Phoenix/City of Colorado Springs solar | assisted Heat Pump project. Tech Progress Report No. 18 |
|
1981 | Kaman Sciences Corp, Colorado Springs | NTIS#DE82011822 | DOECS30207T2 | 7p | Sixth Quarterly Report, 1 oct 1980-31 Jan 81 |
|
|
| Failure Analysis of a Stirling Engine heat Pipe |
|
Moore, T.J.;Cairelli, J.E. | 1989 | NASA Lewis Research Center | NTIS#N89202279 |
|
13p |
|
|
|
| Fast response thermometry in Stirling Engines |
|
|
1982 |
|
SAE#829310 |
|
|
|
|
|
| Fatigue Characteristics of the flexing member of the TMG |
|
Cooke-Yarborough, E.H. | 1974 | Harwell Atomic Energy Research Establishment | Harwell Report#7693 |
|
|
|
|
|
| Fatigue Failure of Regenerator Screens in a High frequency | Stirling Engine |
|
1987 |
|
NTIS#N87188882/7 |
|
|
727,686 |
|
|
| Feasibility of a 50 watt portable generator using a solar | powered Stirling Cycle Engine | Trayser, D.A. | 1965 | RACIC report Battelle, Jan 18 |
|
|
|
|
|
|
| Feasibility of a Ringbom Stirling Engine Combined with a | Solar Pond | Urieli, Isreal; Ming Fe Chen | 1988 | Ohio University, Athens Ohio | SAE#889118 |
|
55-58 |
|
|
|
| Field Performance of Dish/Stirling Solar Electric Systems | Paper | Coleman, G.C., Raetz, J.E. | 1986 | IECEC 21st Conf. Proc. Vol.3, Aug. 1985 | SAE#869136 |
|
pp. 2055-2059 |
|
|
|
| Final Design of a Free Piston Hydraulic Advanced Stirling | Conversion System | Wallace, D.A.;Noble, J.E.;Emigh, S.G. | 1991 | IECEC 26th Conf. Proceedings Vol. 5, Boston | SAE#910831 |
|
349-354 | Stirling Technology Company, Richland WA 99352 |
|
|
| Final Technical Report on Low Pressure High Speed Stirling | Air Engine | Ross, A. | 1980 | Depart of Energy | DE-FG02-79R510142 Grant |
|
|
Study of a 300 CC engine |
|
|
| Finite Element Analysis of Dynamic Energy Transfer in a | Stirling Engine Regenerator | Datta, S., Larson, V.H. | 1982 | IECEC 17th Proceedings | SAE#829281 check number |
|
|
|
|
|
| Finite Element Analysis of the Heater Heat |
|
Kister, J. | 1989 | Stirling Thermal Motors, November 1989 |
|
|
|
Internal Proprietary document |
|
|
| Finite Element Analysis,Test Description and Priliminary | Test Results of the STM4-120 Kinematic Stirling Engine | Linker, Kevin L. | 1991 | Sandia | SAND90-1192 |
|
|
|
|
|
| Fired Stirling Heat Pumps |
|
|
0 |
|
|
|
|
|
|
|
| First Experimental Data Testing the V160 DMA Stirling | Cogeneration Unit | Lista, P. | 1993 | 6th Int. Stirling Engine Conference, Eindhoven |
|
|
|
May 93 |
|
|
| First On-sun Test of a NaK-78 Pool Boiler Receiver |
|
Moreno, J.B.; Andraka, C.E. | 1993 | IECEC Proceedings | SAE#93270 | Pg. 2.511 |
|
Am. Chem. Soc. |
|
|
| First Order Analysis of Ringbom Stirling Engines |
|
Senft, Dr. James R. | 1983 | IECEC 18th Conf. Proc. Orlando, FL | SAE#839125 |
|
|
Univ of Wisconsin, River Falls, WI |
|
|
| First Stirling goes to work | Article | Thomas, Wayne | 1978 | Mechanix Illustrated, December |
|
|
pp. 46-48 | Stirling genset for a Winnebago RV |
|
|
| Fiscal Year 1986 Program 26802-Task 2.0 ADM(Advanced | Development Model) Test Results | Dhar, M. | 1987 | Mechanical Tech. Inc., Stirling Engine Systems Div | NTIS#ADA1947092 | MTI87SESD37 | 142P Feb 87 |
|
|
|
| Five year Research and Development Plan 1986-1990 |
|
Dept of Energy | 1986 | DOE | DOE/CE-0160 Sept 1986 |
|
|
|
|
|
| Flame powered push pull generator runs a year without | maintenance, refueling | Scott, David | 1975 | Popular Science, Feb. |
|
|
|
|
|
|
| Flat Elastomeric Diaphram as Stirling Engine Piston |
|
Fauvel, O.R.;Walker, G.;Reader, G.T. | 1993 | IECEC 28th Conf. Proceedings | SAE#93188 |
|
2.927 | University of Calgary |
|
|
| Flight tests of a Stirling powered model aircraft |
|
McConaghy, Rob | 1988 | New Machine Company, Kirkland, WA | SAE#889435 |
|
|
|
|
|
| Flow and Heat tranfer characteristics of Stirling Engine | Regenerator in Oscillating flow | Tanaka, M.;Yamashita, I.;Chisaka, F. | 1989 | Trans Jpn Soc Mech Engrs Vol 55 No 516 |
|
|
2478 |
|
|
|
| Flow and Heat transfer characteristics of Stirling Engine | regenerator in oscillating flow | Tanaka, M.;Yamashita, I.;Chisaka, F. | 1989 | Trans. Japanese Soc. of Mech. Eng. Vol. 55 |
|
|
2478 |
|
|
|
| Flow homogencity in Stirling engine regerator |
|
|
0 |
|
SAE# |
|
|
|
|
|
| Flow loss Study in a Large Fluidyne |
|
Fauvel, O.R.; Walker, G. | 1988 | IECEC 23rd Conf. Proc. ASME | SAE#889348 |
|
|
|
|
|
| Flow losses in a Stirling Engine heat exchangers |
|
|
1985 | IECEC 20th Conf. Proc. | SAE#859437 |
|
|
|
|
|
| Flow Patterns and Frictional losses in an Oscillating | Pipe flow | Ohmi, M.;Iguchi, M.;Urahata, I. | 1982 | Japanese Society of Mechanical Engineers | Bulletin of JSME |
|
536-543 |
|
|
|
| Fluid Particle trajectories in Stirling Cycle Machines |
|
Organ, A.J. | 1976 | King's College, Univ. of London, Research report |
|
|
|
|
|
|
| Fluidized bed coal combustion as a heat source for Stirling | Engines | Asselman, G.A. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept 12-17 |
|
|
|
|
|
|
| Fluidized bed combustor for the Stirling Engine |
|
Thrig, R.H. | 1975 | Ph D. Thesis, Univ. of reading | SAE#759142 |
|
|
|
|
|
| Fluidyne Engine. The | Student Project Thesis | Bell, A.J.;Goldberg, L.F. | 1976 | Univ Witwatersrand, Johannesburg,. SA |
|
|
|
|
|
|
| Fluidyne Heat Engine, How to build one, How it works |
|
Elrod, H.G. | 1975 |
|
NTIS#AD-A006367/7GI |
|
|
ONR London Report R-14-74 | NTIS#AD/A-006-367 | NTIS AD/A-006 Dec 1974 |
| Fluidyne Heat Engine, The |
|
Mosby, D.C. | 1978 | USNPG School Monterey, CA | M. Sc. Thesis, Post Grad School, Monetrey, Sept |
|
|
Thesis written while at U.S.Navy Postgrad school | discussing fluidyne theory, one of the earliest | theoretical papers on the subject |
| Fluidyne Heat Engine. The |
|
West, Colin D. | 1971 | AERE Report May 1971 | HL71/2245,AERE-R-6776(1971) |
|
|
|
|
|
| Fluidyne Heat Engine: How to build One, How it works |
|
Elrod, H.G. | 1974 | ONR London Report | #R-14-71, NTIS No. AD/A-006-367 |
|
|
|
|
|
| Fluidyne Pumping Engine with Minimal Tuning Line |
|
West, Colin. D. | 1986 | IECEC 21st Conf. Proc. /Am.Chem.soc. | SAE#869131 |
|
|
DE86007320 630573 |
|
|
| Fluidyne-a heat engine in a waterglass, The |
|
Reader,G.T.;Lewis,P.D. | 1979 | Journal of Naval Science Vol 5Oct 1979 |
|
|
240-242 |
|
|
|
| Ford buys license for old Stirling Engine, eventual use is | possible to fight pollution |
|
1972 | Wall Street Journal, Aug 14 |
|
|
|
|
|
|
| Ford is readying Stirling Engine for Torino II |
|
|
1973 | Auto. Engineer Vol 81 |
|
|
42-45 |
|
|
|
| Ford shows latest Stirling |
|
|
1976 | Machine Design |
|
|
|
|
|
|
| Ford Stirling Engine powertrain development |
|
Postma, N.P. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy, MI |
|
|
|
|
|
|
| Ford will develop "hot air engine" with Dutch partner |
|
|
1972 | Los Angeles Times Aug 9 |
|
|
|
|
|
|
| Ford/Philips Stirling Engine Program, The |
|
Kitzner, E.W. | 1977 | ERDA Adv Auto Power Syst. Cont. Coord. Mtg. Oct, |
|
|
|
meeting in Dearborn, MI |
|
|
| Ford-Philips Stirling Engine program |
|
Waalwijk, J.M.; Widenhof, N. | 1974 | Philips Information No. 6519E Oct |
|
|
|
|
|
|
| Ford's Gamble-Stirling Cycle Engine promises low emissions | without add-ons | Norbye, J.P.; Dunne, J. | 1973 | Popular Science February |
|
|
72-74,154 |
|
|
|
| Four Cylinder Stirling Engine computer Program with | Dynamic Energy Equation | Daniele, C.J.; Lorenzo, C.F. | 1983 | NASA Lewis Research Center f/DOE | NTIS#DE83012955 | NASATM-83053 | 64p |
|
|
|
| Four Cylinder Stirling Engine Controls Model, A |
|
|
1981 |
|
NTIS#N81-15241/5 | DOE/NASA5104021 |
|
|
|
|
| Four Cylinder Stirling Engine Controls simulation |
|
University of Georgia, Athens |
|
NASA computer Software Technology Tfr. Ctr, COSMIC | LEW14106 |
|
|
|
|
|
| Four Cylinder Stirling Engine Simulation with Dynamic | Energy Equations | University of Georgia, Athens |
|
NASA Computer Software Technology Tfr. Ctr, Cosmic | LEW-14155 |
|
|
|
|
|
| Francot-Bartolini Stirling Engine with Ross linkage |
|
|
1988 |
|
SAE#889349 |
|
|
Discusses use of title, diagrams and drawings |
|
|
| Free-Cylinder Stirling Engine Solar Powered Water Pump, A |
|
Beale, William T. | 1979 | Int. Solar Energy Society International Congress | Atlanta, 1979 |
|
|
Discussion of progress in Free-Piston engines | designed to power water pumps |
|
| Free-Cylinder Stirling Engines for Solar Water Pumps |
|
Beale, W.T.;Rauch, J.;Lewis, R. | 1971 | ASME paper Aug. | 71-WA/SOL-11 |
|
|
Short paper on the use of Free-Piston engines to | power reciprocating water pumps |
|
| Free-Displacer, Free Piston Stirling Engine- | Potential Energy Conserver, The | Martini, W.R. | 1977 | IECEC 10th Conf. Proc. | SAE#779247? |
|
995-1002 |
|
|
|
| Free-Piston Brayton Engine for Low Power |
|
Bjerklie, J.W. | 1971 | IECEC 793 |
|
|
|
|
|
|
| Free-Piston Electric Plant |
|
Benson, Glendon M | 1959 | Lawrence Livermore Laboratories |
|
|
|
|
|
|
| Free-Piston Heat Pumps |
|
Benson, Glendon M. | 1977 | IECEC 12th Conf. Proc. | SAE#779068 |
|
|
|
|
|
| Free-Piston Linear Alternator Solar Stirling Engine Concept |
|
Holliday, J.C.; Howell, S.G.;Richter, M. | 1986 | IECEC 21st Conf. Proc./San Diego CA |
|
|
|
|
|
|
| Free-Piston Machines operated by damped resonant mechanical | oscillations | Benson, Glendon M. | 1963 | New Process Ind. |
|
|
|
|
|
|
| Free-Piston Space Stirling Technolgy Program |
|
Dochat, George R. | 1990 | IECEC 24th Conf. Proc. Reno, NV |
|
|
|
|
|
|
| Free-Piston Space Technology Program; An Update |
|
Dochat, George R. | 1991 | IECEC 26th Conf. Proc. |
|
|
219-221 |
|
|
|
| Free-Piston Stirling Component Test Power Converter |
|
Dochat, George R.; Manmohan, Dhar | 1991 | IECEC 26th Conf. Proc./MTI f/NASA |
|
|
239-244 |
|
|
|
| Free-Piston Stirling Component Test Power Converter Test | Results and Potential Applications | Dochat, G.R. | 1992 | IECEC 27th Conf. |
|
|
|
|
|
|
| Free-Piston Stirling Convertor Dynamic gas bearings |
|
Dimofte, Florin;Liebler, Kenneth A. | 1992 | IECEC 27th proceedings\NASA Lewis\Magnebit Corp. | SAE#929384 |
|
5.387-5.392 | San Diego |
|
|
| Free-Piston Stirling Coolers |
|
Berchowitz, David M. | 1992 | Energy Efficiency and Refrigeration Conference | Purdue University july 1992 |
|
|
|
|
|
| Free-Piston Stirling Coolers for Intermediate Lift | temperatures | Berchowitz, David M. | 1992 | IECEC 27th Proceedings\Sunpower Inc. | SAE#929039 |
|
5.115-5.121 | Purdue univ. July 1992 |
|
|
| Free-Piston Stirling Electric Plant |
|
Benson, G.M. | 1959 | Lawrence Livermore Labs Adv. Dev. Note |
|
|
|
|
|
|
| Free-Piston Stirling Engine 1-20 years of development, The |
|
|
1983 |
|
SAE#839110 |
|
|
|
|
|
| Free-Piston Stirling Engine Alternator Power Plant |
|
Benson, Glendon M. | 1968 | Prop MERDC |
|
|
|
|
|
|
| Free-Piston Stirling Engine conceptual design and tech- | nologies for space power. Phase I, final Report | Beale, William T.;Penswick, L. Barry | 1992 | NASA | NASA CR-182168 |
|
|
|
|
|
| Free-Piston Stirling Engine Demonstration Test Plan |
|
|
1980 |
|
|
COO2764-T3 |
|
|
|
|
| Free-Piston Stirling Engine Development. Annual Report 1 Dec | 82-83 Dec 83 | Marusak, T.J.;Gilles, T. | 1984 | Mechanical Technology Inc f/Gas Research Inst | NTIS#PB84237767 | GRI840074 | 131p | MTI84FPSE23 |
|
|
| Free-Piston Stirling Engine Development. Final Report | Jan 1, 1986-Dec 31, 1987 | Ackermann, R.A. | 1988 | MTI f/Gas Research Institute | NTIS#PB88220025 | GRI880037 | 165p |
|
|
|
| Free-Piston Stirling Engine Diaphragm Coupled Heat Pump | component Technology Phase 1/1A final Report |
|
|
|
DE86001463 |
|
|
610678 |
|
|
| Free-Piston Stirling Engine diaphram coupled Heat actuated | heat Pump Component technology Program | Ackermann, R.A. | 1988 | Oak Ridge Nat. Lab. | ORNL/Sub/86-47985/2&V1 |
|
|
|
|
|
| Free-Piston Stirling Engine Diaphram-coupled heat actuated | Heat Pump Component Program. Vol. 2, Phase 2a Final Report | Ackermann, R.A. | 1988 | Oak Ridge National Labs/Lennox Test Program/MTI | NTIS#DE89001954 |
|
281p 25 Jan 88 |
|
|
|
| Free-Piston Stirling Engine Diaphram-coupled heat-actuated | Heat Pump component Technology Program Phase 1B Final Report | Ackermann, R.A. | 1987 | MTI f/DOE | NTIS#DE88003653 | ORNLsub83479851 | 130p Sep 87 |
|
|
|
| Free-Piston Stirling Engine Diaphram-coupled heat-actuated | Heat Pump Component Program:Phase 1C, Final report | Ackermann, R.A. | 1987 | MTI f/DOE | NTIS#DE88003654 | ORNLsub86479851 | 151p Jul 87 |
|
|
|
| Free-Piston Stirling Engine driven heat activated heat pump | program |
|
1987 |
|
SAE#879030 |
|
|
|
|
|
| Free-Piston Stirling Engine driven inertia compressor for | gas fired air conditioning | Rauch, J.S. | 1972 | Proc 2nd Con. Nat. Gas Res. and Tech, Session III | Paper 5 |
|
|
Washington, DC June 5-7 | 2nd Congress on Natural Gas Research and Tech. |
|
| Free-Piston Stirling Engine Dynamics |
|
NASA | 1992 | NASA | TM- |
|
|
|
|
|
| Free-Piston Stirling Engine Endurance Testing-5000 hour | Test Summary | Mechanical Technology Inc | 1985 | Mechanical Technology Inc f/DOE/GRI | Contract DEN3-333,Letter Report, 1985 |
|
|
|
|
|
| Free-Piston Stirling Engine Experimental Program: Part 1 | Baseline Test Summary | Berggren, R.;Moynihan, T. | 1983 | Mechanical Technology Inc f/DOE | NTIS#DE84003659 | ANLCT837Pt1 | 51p | Jun 83 |
|
|
| Free-Piston Stirling Engine Experimental program: Part 2 | An evaluation of Loss Mechinisms | Moynihan, T.; Berggren, R | 1983 | Mechanical Technology Inc, f/DOE | NTIS#DE84003658 | ANLCT837Pt2 | 189p |
|
|
|
| Free-Piston Stirling Engine for small solar power plants, A |
|
Prast, G.;de Jonge, A.J. | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug 20-25 |
|
|
|
|
|
|
| Free-Piston Stirling Engine Hydrostatic Drive |
|
Benson, Glendon M. | 1965 | Preliminary prop ATAC |
|
|
|
|
|
|
| Free-Piston Stirling Engine magnetically coupled heat pump; | critical component evaluation, Phase 1, Final report | Chen, G. | 1989 | Sunpower Inc./DOE | NTIS#DE89015646\ORNL/Sub/86-SA578/1 |
|
57p Aug 89 |
|
|
|
| Free-Piston Stirling Engine Scaling Study |
|
Jones, D. | 1990 | IECEC 25th Conf. Proceedings |
|
90-5-245 |
|
|
|
|
| Free-Piston Stirling Engine system Considerations for | various space Power applications | Dochat, George R. | 1991 | 8th Symposium, on Space Nuclear Power Systems |
|
|
|
Jan 91 |
|
|
| Free-Piston Stirling Engine/Linear Alternator 1000 Hour | Endurance Test | Rauch, J.;Dochat,G. | 1985 | DOE/NASA/GRI | CR-174771 | DOE/NASA/033-1 |
|
DE85014520 | NTIS554513 |
|
| Free-Piston Stirling Engine-Driven Heat Pump Program Plan |
|
Ross, B.A.;Hutchinson, R.A. | 1988 | IECEC 22nd Conf. Proc. /Battelle Pacific NW Labs, |
|
|
7p |
|
|
|
| Free-Piston Stirling Engines | Lecture Notes in Engineering | Walker Graham; Dr James R. Senft | 1989 | Springer-Verlag Berlin & NY | book |
|
|
Good description of Free-Piston engine development | work and theory. Pictures of some early engines |
|
| Free-Piston Stirling Engines |
|
Senft, Dr. James R. | 0 | Univ. of Wisconsin, River Falls |
|
|
|
|
|
|
| Free-Piston Stirling Engines |
|
Beale, William T. | 1969 | SAE | SAE#690230 check number |
|
|
|
|
|
| Free-Piston Stirling Engines for Space Power |
|
Dochet, George R. | 1984 | 22nd Automotive Tech. Dev. Contractors Coord Meet |
|
|
209-213 |
|
|
|
| Free-Piston Stirling Engines for Terrestrial Solar | Electrical Power Conversion | Dochat, George., Vitale, N. | 1986 | IECEC 21st Conf. Proc. Vol. 3 | SAE#869475 |
|
|
|
|
|
| Free-Piston Stirling Engines, A Progress Report | Paper | Beale, William T.; Holmes, W.;Lewis,S. | 1973 | Powerplant Meeting Chicago, Ill June | SAE#730647 |
|
11p |
|
|
|
| Free-Piston Stirling Engines: For space,earth and ocean | applications | Goldwater, Bruce | 1990 | IECEC 25th Conf. Proc. Vol 5 \MTI |
|
|
324-330 |
|
|
|
| Free-Piston Stirling Engines; these engines promise cost | effective solar-power generation. NTIS tech note. | NTIS | 1989 | NASA | NTIS#NTN890362 |
|
1p May 89 |
|
|
|
| Free-Piston Stirling Engines-Model tests and simulations |
|
Beale, William T. | 1969 | SAE Auto Engineering Congress Detroit 1969 | SAE#690230 check number |
|
|
|
|
|
| Free-Piston Stirling Engines-Some Model Tests and Simulation |
|
Beale, William T. | 1969 | SAE | SAE#600203 |
|
|
|
|
|
| Free-Piston Stirling Hydraulic Engine and Drive Systems for | Automobiles |
|
1983 |
|
NTIS#N8325625/5 |
|
|
|
|
|
| Free-Piston Stirling Hydraulic Engine, The Right Stuff |
|
White, M.A.;Emigh; J.;Noble, P. | 1989 | Solar Today | Sept/Oct 1989 issue |
|
pp. 21-23 | Description of the Free-Piston Hydraulic power | unit for solar power use, story adapted from IECEC | 23rd Conf. paper |
| Free-Piston Stirling Machines operated by damped resonant | Mechanical Oscillators | Benson, Glendon M. | 1963 | New Process Industries |
|
|
|
|
|
|
| Free-Piston Stirling may power space platform |
|
|
1986 | Machine Design v58 Sept 11, 1986 |
|
|
48-49 | diagram |
|
|
| Free-piston Stirling may power Space Platforms | Article |
|
1986 | Machine Design September 11, 1986 |
|
|
pp. 48-49 | Description of the SP-100 project for a space | pwer plant. |
|
| Free-Piston Stirling systems for power generation and heat | pumps | Pillar, S. | 1978 | Inst. of Gas Tech. Sem Stirling Cycle Prime Movers |
|
|
|
Institute of Gas Technology, Chicago IllJune 78 |
|
|
| Free-Piston Stirling Technology for Space Power. |
|
Slaby, Jack G. | 1989 | Int. Conf. on Space Power,f/Int Astronautical Fed. | NTIS#89201941 | TM-101956 | 21p | NASA |
|
|
| Free-Piston Stirling/Linear Alternator Demonstrator Engine | Some design considerations | Rauch,J.S. | 1978 | IECEC 13th Conf. Proceedings | SAE#789353 |
|
1853-1857 |
|
|
|
| Frequency Dynamic Analysis of Free Piston Stirling Engines |
|
Cichy, M.;Carlini, M. | 1984 | IECEC 19th Conf. Proc. |
|
|
1829-1830 |
|
|
|
| Fuel Tolerance in the Stirling Engine |
|
Hurn, R.W. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Fully Implantable Stirling Engine Power Source for | Artificial Hearts. | White, Maurice A. | 1985 | IECEC 20th Conf. Miami Beach, Aug 18-23 1985 | SAE#859201 |
|
|
|
|
|
| Fully Implanted Stirling Engine for artificial heart power |
|
|
1982 | IECEC 17th Conf. Proc. | SAE#829294 |
|
|
|
|
|
| Fundamental flow and heat transfer results relevant to | oscillating flow regenerators |
|
1987 | IECEC | SAE#879343 |
|
|
|
|
|
| Fundamental studies of Stirling Engine and Its Principle | Components(in Japanese) | Yamashita, I. | 1988 | Mechanical Engineering Laboratory | #145 |
|
59 |
|
|
|
| Fundamentals for the Development of Philips Air Engines |
|
DeBrey, H.;Rinia, H.;van Weenen, F.L. | 1947 | Philips Technical Review, Vol 9, No 4 |
|
|
97-104 | Also in Automotive Industries, v97,n12, Dec 15, 47 | Engineers Digest, v5,n1, Jan 48, Power and Works | Engr v43,n501;Steam Engr v17,n198,199 Mar 48 |
| Fundamentals for the development of the Phillips Air Engine |
|
Brey,H.& F. L. van Weenen | 1947 | Philips Technical Review | Rev., 9 |
|
pp. 97-104 |
|
|
|
| Fundamentals of the Gas Refrigerating Machine |
|
Kohler, J.W.;C.O. Jonkers | 1954 | Philips Technical Review, Vol 16 |
|
|
pp. 105-115 |
|
|
|
| Further development of a demonstration Martini-Ringbom | Stirling Engine(paper) |
|
1987 | IECEC 22nd Conf. Proc. | SAE#879156 |
|
|
|
|
|
| Further development of the Fluidyne Liquid Piston Engine |
|
Elston, M.; Lurie, M.;Rallis, C. | 1982 | IECEC 17th Conf. Proceedings/IEEE | SAE#829291 check number |
|
|
|
|
|
| Further Developments in the Design of a Free-Piston Stirling | Engine Heat Pump for Residential Applications |
|
1987 |
|
NTIS#DE87008581 |
|
|
748,762 |
|
|
| Further experiments on a small Ringbom-Stirling Engine | Paper |
|
1987 | IECEC | SAE#879157 |
|
|
|
|
|
| Further Stirling Engine development |
|
Zacharias, F.A. | 1977 | MTZ Motortechnische Zeitschrift, Vol 38 |
|
|
371-378 |
|
|
|
| Further tests on a back to back free displacer disciplined | Piston Stirling Engine |
|
1988 | IECEC | SAE#889437 |
|
|
|
|
|
| Further Two-Dimensional Code Development for Stirling | Space Engine Components | Ibraham, M.B.; Tew, Roy C. | 1990 | IECEC 24th Conf. Proc. Reno NV Vol 6 |
|
|
329-335 |
|
|
|
| Future Automotive plants |
|
|
1978 | IECEC 13th Conf. Proc. San Diego, CA | SAE#760607 SAE SP-409 |
|
|
|
|
|
| Future Coal Burning Stirling Engines |
|
Walker, G.; Fauvel, R. Srinivasan, V. | 1982 | Inst of Mech. Engineers, London, |
|
|
1-9 | Univ. of Reading |
|
|
| Future fuels and Engines for Railroad Locomotives. vol II | Technical Document | Liddle, S.G.; Bonzo, B.B. | 1981 | Jet Propulsion Laboratories f/DOE | NTIS#DE82016004 | JPLPUB81101V2 | 413p |
|
|
|
| G.M.'s amazing new 2 piston engine |
|
Weissler, P. | 1965 | Science and Mechanics, March |
|
|
76-79, 104-105 |
|
|
|
| Gamma Stirling configuration and simultaneous production | of shaft power and heat pumping, The |
|
1985 |
|
SAE#859265 |
|
|
DE85016314 | NTIS562053 |
|
| Gas and Caloric Engines |
|
Fleeming Jenkin, H.C. | 1884 | Heat and Mechanical Apps, Inst of Civil Engineers | 1885, pg 124 |
|
|
|
|
|
| Gas Dynamics of the temperature determined |
|
Organ, S.C. | 1981 | Journal of Mechanical Engineering Science |
|
|
|
|
|
|
| Gas Fired Heat Pumps. An emerging technology |
|
Sarkes, L.A.; Nicholls, J.A. | 1977 | ASHRAE Journal, March |
|
|
|
|
|
|
| Gas Refrigerating Machine and its position in cryogenic | technique., The | Kohler, J.W.L. | 1960 | Prog. Cryogenics Vol 2 |
|
|
41-67 |
|
|
|
| Gas Refrigerating Machine for Temperatures down to 70K and | lower | Prast, G. | 1964 | Philips Technical Review, V26,(1964-1965) |
|
|
1-11 |
|
|
|
| Gas Refrigerating Machine for the temperature region | of Liquid Hydrogen | Prast, G. | 1962 | Philips Technical Review, V24,(1962/1963) |
|
|
pg. 396 |
|
|
|
| Gas Refrigerating Machine, The |
|
Kohler, J. W. L.; Jonkers, C.O. | 1954 | Philips Technical Review, V16,(1954) |
|
|
69-78, 105-115 |
|
|
|
| Gas Wall Heat Transfer during compression and expansion |
|
Kornhauser, A.A. | 1989 | MIT Sc. D. Thesis |
|
|
|
|
|
|
| Gas, Oil and Air Engines |
|
Donkin, Bryan | 1896 | Charles Griffin, London, 1896, 2nd Edition |
|
|
|
|
|
|
| Gas-Fired Duplex Free-Piston Stirling Refrigerator. | Final Report Nov 82-Mar 84 | Urieli, Israel | 1984 | Sunpower Inc f/Gas Research Inst | NTIS#PB85129708 | GRI840147 | 56p | Mar 84 |
|
|
| General method for optimization of Stirling Engines |
|
|
1982 |
|
SAE#829278 check number |
|
|
|
|
|
| General Motors looks to the future |
|
|
1966 | Engineering, London, Vol 202 |
|
|
927 |
|
|
|
| General Motors Stirling Engine. application from under the | sea to outer space, The |
|
1968 | General Motors Research Laboratories, Warren MI |
|
|
|
|
|
|
| General purpose program for Stirling Engine simulation.,A |
|
Urieli, Israel | 1980 | IECEC 15th Conf. Proceedings | SAE#809336 |
|
|
|
|
|
| General results on mechanical efficiency of heat engines |
|
Senft, Dr. James R. | 1988 | IECEC 23rd Conf. Proceedings, Denver August | SAE#889340 |
|
|
|
|
|
| Generalized computer based kinematic dynamic simulation of | single degree of freedom Stirling Cycle planar mechinism | Livingston,R.P.; Frykberg, D.G. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
20-25 |
|
|
|
| Generalized Ideal Reference Cycle for Regenerative | Refrigeration | Walker, Graham | 1984 | Cryogenics, Vol 24, July 84 |
|
|
347-354 | diagrams |
|
|
| Generalized Implanted Energy Conversion System |
|
Johnston, R.P. | 1979 |
|
NO1-HV-4-2901-6 March 79 |
|
|
Appendix I, generalization of the Finkelstein | Adiabatic Cycle to allow for nonsinusoidal Piston | motion |
| Generalized thermodynamic analysis of Stirling Engines |
|
Finkelstein, Theodore | 1960 | SAE Trans Paper Jan 11th meeting 1960 Detroit MI | #118B |
|
|
case of limited heat transfer coefficient and | variable exposed surface area for cylinder is | treated in analysis. |
| Generalized Thermodynamic Analysis of Stirling Engines |
|
Stoddard, D. | 1960 | B.Sc. Thesis, Durham, Univ |
|
|
|
|
|
|
| Generators that won't wear out |
|
Maurice a. White, Barry Penstock | 1996 | ASME | Mechanical Engineering, feb 1996 |
|
92-97 | Summary of the RG10,RG350 and RG 3500 Stirling | Free Piston Alternators. |
|
| Get the oil monkey off our backs |
|
McCormick, D. | 1981 | Design Engineering, Nov |
|
|
44-51 |
|
|
|
| GLIMPS version 4.0 User's Manual |
|
Gedeon, David | 1992 | Gedeon Assoc.,16922 S. Canaan Rd, Athens, OH 45701 |
|
|
|
|
|
|
| GLIMPS Computer Program |
|
Gedeon Associates | 1990 | Gedeon Associates, Athens, OH |
|
|
|
|
|
|
| GLIMPS Stirling Cycle Simulation |
|
Gedeon, David | 1986 | Gedeon Associates, Athens, Ohio June 87 |
|
|
|
|
|
|
| Globally Implicit Stirling Cycle Simulation. A |
|
Gedeon, David | 1986 | IECEC 21st Conf. Proc. /American Chem. Society | SAE#869121 |
|
550-554 | 21st IECEC Conf. San Diego |
|
|
| GM considering Stirling Engines for hybrids of 21st Century |
|
www.uscar.org/techno/hyb_gm.htm | 1997 | GM building a Stirling power unit as a part of a DOE contract | GM Newsletter |
|
|
|
|
|
| GM Stirlec-a Stirling Engine electric hybrid car |
|
|
1968 | General Motors Research Laboratories, Warren MI |
|
|
|
|
|
|
| GMR Stirling Thermal Engine |
|
|
1960 | Mechanical Engineer vol 82 |
|
|
88-89 |
|
|
|
| GMR Stirling Thermal Engine, Part of the Stirling Engine | Story, 1960 chapter | Flynn, G.;Percival, W.H. | 1969 | SAE Journal Transactions, Vol 68 April |
|
|
42-51 |
|
|
|
| GMR Stirling Thermal Engine-Part of Stirling Engine story | 1960 Chapter | Flynn, G.;Percival, W.H.;Heffner, F.E. | 1960 | SAE Trans V68 paper for Jan 11th Meeting | #118A |
|
655-683 | discussion of Phillips and General Motors engines | performance of first modern engines |
|
| Golden Thread, The |
|
Butti, Ken; Perlin, John | 1980 | Cheshire Books, Palo Alto, CA |
|
|
|
Includes Stirling and Hot air engine history in | with history of solar Power | Book |
| Ground-mounted thermal storage for the parabolic dish solar | collector/Stirling Engine System |
|
1980 | SAE | SAE#819432 |
|
|
|
|
|
| Grundlagenentwicklung zur thermodynamik und magnetischen | Kraftuebertragung einer Freikolben.(in German) | Klass, O. | 1989 | Bomin-Solar GmbH, Loerrach(germany FR) | NTIS#TIBB8982497 |
|
74p | Basic development on thermodynamics and magnetic | force transmission of a Free-Piston stirling drive | unit.(title) |
| Guidelines for preliminary design of Stirling Engines |
|
|
1979 |
|
SAE#799230 |
|
|
|
|
|
| Handbook of Data on Selected Engine Components for Solar/ | Thermal Applications |
|
1983 |
|
NTIS#DOE/NASA/1060-78/1 |
|
|
|
|
|
| Harald Berg's hot Air Engined Boats |
|
Ross, A. | 1985 | Live Steam Vol. 19, No. 1, Jan |
|
|
18-21 |
|
|
|
| Hardware Development and Initial Subassembly testing of | a Gas Fired Stirling/Rankine Compressor | Chen, G.;McEntee,J. | 1990 | IECEC 25th Conf. Proceedings V5 Aug 90\Sunpower | SAE#900377 NTIS#DE90012203 |
|
258-263 |
|
|
|
| Harmonic Analysis of Stirling Engine Thermodynamics |
|
Rauch, J.S. | 1980 | IECEC 15th Proceedings, Seattle, WA Aug. 1980 | SAE#809335 |
|
1696-1700 |
|
|
|
| Harmonic Analysis of Stirling Engines, A |
|
Nobrega, A.C. | 1965 | M.I.T. Thesis |
|
|
|
|
|
|
| Harmonic Stirling Cycle Analysis |
|
Berggren, R. | 1987 | Mechanical technology Inc | MTI#87SESD38 |
|
|
|
|
|
| Harwell Thermo-Mechanical Generator, The |
|
Cook-Yarborough, E.H. | 1974 | IECEC 9th Conf. Proc. San Francisco, CA | SAE#749156 |
|
|
AERE-R7714, March. Other ref lists Franklin, E.; | Gleisow, J.; West, C.D. |
|
| Has a Perpetual Solar Engine been developed? |
|
Edmundson, W.B. editor | 1981 | Solar Energy Digest Nov 81 |
|
|
1 |
|
|
|
| Heat Activated Heat Pump development and Potential | Application of Stirling Engine Technology | Fairchild, P.D.; West, Colin D. | 1982 | Oak Ridge National Laboratory | NTIS#DE83002134 | CONF8210551 | 43p | paper at Automotive Technology Dev. Contractor | Coordination Meeting Dearborn, Oct 1982 |
|
| Heat Driven Heat Pumps |
|
Beale, William T. | 1988 | IECEC 23rd Conf. Proc. Vol.1 | SAE#889039 |
|
pp. 27-32 |
|
|
|
| Heat Engine Development for Solar Thermal Dish-Electric | Power Plants | Linker, Kevin L. | 1986 | Sandia National Laboratories | SAND-86-0289 November 1986 |
|
|
|
|
|
| Heat exchange and hydraulic resistance in dumped packings | of regenerators | Elukin,N.K.;Strarosvitskill, S.I. | 1964 | Int. Chem Engineer, Vol 4 |
|
|
114-118 |
|
|
|
| Heat Exchangers with liquid metal heat transfer agent for | Stirling Engines | Gonnov, V.; Pgompv. N.I. | 1989 | Central Scientific Research Inst of Atomic Info. |
|
|
|
|
|
|
| Heat exchangers with liquid metal heat transfer agent for | Stirling Engines | Gonnov, I.V. | 1989 | Central Scientific Research Inst. of Atomic Info. | Moscow, SU |
|
|
|
|
|
| Heat exchangers with liquid metal transfer agent for | Stirling Engines; Analytical review | Gonnov, I.V.;Loktionov, Y.V.;Stoljarov,S | 1989 | Central Scientific Research Institute, Moscow |
|
|
|
Central Scientific Research Institute of Atomic | Information, Moscow, SU |
|
| Heat Pipe gas combustion systems endurance test for Stirling | Engines: Final report May 1990-Sept 1990 | Mahrle, P. | 1990 | Stirling Thermal Motors f/Gas Research Inst. | NTIS#PB91161257 | GRI900297 |
|
|
|
|
| Heat Pipe Transport System for Stirling Space Power | Converter | Alger, Donald | 1992 | IECEC 27th Proceedings\Sverdrup Technolgy Inc. | SAE#929399 |
|
5.455-5.459 |
|
|
|
| Heat Pump with an air-water working fluid, A |
|
Hise, E.C.; Wilson, J.V. | 1977 | IECEC 12th Conf. Proc. Washington, DC | SAE#779066 |
|
|
|
|
|
| Heat Receiver design for Solar Dynamic Space Power Systems |
|
Baker, K.W.; Dustin, M.O. | 1990 | NASA/Int. Solar Energy Conf., Miami, Apr 1-4 1990 | NTIS#N90142837 |
|
7p |
|
|
|
| Heat Regeneration by thermal wheel |
|
Applegate, C.G. and Newberry Ltd | 1974 | Energy Digest vol 3 |
|
|
21-23 |
|
|
|
| Heat Regenerator design for the Thermo-Mechanical generator | Stirling Cycle Engine | Franklin, E. | 1970 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2320 |
|
|
|
|
|
| Heat Regenerators |
|
Saunders, O.A.; Smoleniec, s. | 1948 | Proc. 7th Int. Congress of Applic. Mechanics Vol 3 |
|
|
|
|
|
|
| Heat Tranfer in Oscillation flows with Sudden cross section |
|
Ibrahim, M.;Hashim, W.;Tew, R. | 1992 | IECEC 27th Proceedings\NASA Lewis Res. Center | SAE#929464 |
|
5.503-5.508 |
|
|
|
| Heat Transfer and flow friction characteristics of compact | matrix surfaces for Stirling Cycle regenerators | Walker, Graham; Vasishta, V. | 1969 | M.Sc. Thesis Univ. of Calgary |
|
|
|
1971 Advances in Cryogenic Engineering, Vol 16 |
|
|
| Heat Transfer and friction characteristics of Dense Mesh | Wire Screen Stirling Cycle Regenerator | Walker, G.; Vashista, V. | 1970 | Adv in Cryogenic Eng, vol 14 June 70, Plenum Press | Paper H-3 June 70 |
|
|
1972 Proc. 4th Int. Cryogenic Eng. Conf., | Eindhoven, Neth. |
|
| Heat Transfer and Friction Flow Characteristics of dense | mesh wire screen regenerator matrices | Wan, W.K. | 1971 | M.Sc. Thesis, Univ. Of Calgary |
|
|
|
|
|
|
| Heat Transfer and Pressure Loss characteristics of matrices | for regenerative heat exchangers | Rapley, C. | 1965 | ASME#65-HT-35 Aug |
|
|
|
|
|
|
| Heat Transfer in in Thermal Regenerators |
|
Rapley, C. | 1960 | M Sc. Thesis, Durham Univ, UK |
|
|
|
|
|
|
| Heat Transfer in pulsating flow |
|
Havemann,H.A.;Narayan, R.N. | 1954 | Nature(London) Vol 174 |
|
|
41 |
|
|
|
| Heat Transfer in Regenerators. General discussion on heat | transfer | Saunders,O.A. | 1954 | Inst. of Mech Engineers, |
|
|
|
|
|
|
| Heat transfer to single and double row Stirling | engine heater tubes |
|
1986 |
|
SAE#869117 |
|
|
|
|
|
| Heat Transfer with Oscillating Pressure and Oscillating | flow | Kornhauser, A.A.;Smith, J.L. | 1989 | IECEC 24th Conf. Proceedings vol 5 |
|
|
2347-2354 |
|
|
|
| Heat transfer with Oscillating Pressure and Oscillating | flow | Kornhauser, A.;Smith, J.L. | 1989 | IECEC 24th Conf. Proceedings |
|
|
2347-2353 |
|
|
|
| Heated Air Motors |
|
Martin, L.P., Vienna | 1884 | Engineering Feb. 15, 1884 |
|
|
pg. 156 | Description of Hot Air Engine with rotary disk | valves incorporated |
|
| HEATPULSE-description |
|
www.tiac.net/users/pcag/solar/sp.htm | 1999 | Solar powered low temp machine with flat plate regenerator ab |
|
|
|
|
|
|
| Helium Conservation and Supply and Demand Projection in the | USA | Liu, Ben-Chieh | 1983 | Energy Economics, Vol. 5 Jan. 83 |
|
|
|
|
|
|
| Helium is Up,Up and Away-for now |
|
Agoos, A. Savage, P. | 1987 | Chemical Week April 1, 1987 |
|
|
|
|
|
|
| Helium market, The |
|
Uri, Noel D. | 1986 | Applied Energy 22(1986) |
|
|
|
|
|
|
| Helium Resources of the United States |
|
Miller, R.D. | 1985 | Bureau of Mines | Information Circular 9130 |
|
|
|
|
|
| Hermetic Bellows Seals for Stirling Engines |
|
White, Maurice A, Emigh, Grant | 1987 | IECEC 22nd Conf./AIAA Phila, Aug 10-14 | SAE#879217 |
|
pp. 1841-1846 | Discussion on life expectancy and use of hermetic | bellow seals. |
|
| Hermetically Sealed Ringbom Stirling Engine/Regenerator |
|
Giberman, J.M.;Anderson, W.M. | 1989 | IECEC 24th Conf. IEEE sponsor | SAE#899541 |
|
pp. 2881 | Detailed discussion on this type engine with | photographs |
|
| Hermetically Sealed Stirling-Electric Generator Set |
|
Carlqvist, Stig G.; Schroder, Curt | 1988 | IECEC 23rd Conf. Proc. Denver, CO |
|
|
187- | Aug 80, |
|
|
| HFAST- A harmonic Analysis Program for Stirling Cycles |
|
Huang, S.C. | 1992 | IECEC 27th Proceedings\MTI Inc. | SAE#929028 |
|
5.47-5.52 | also #92IECEC425,92 |
|
|
| HFAST- A thermodynamic analysis program for Stirling cycles |
|
Huang, S.C. | 1992 | IECEC 27th Proceedings | SAE#929028 |
|
|
|
|
|
| HFAST Computer Program |
|
MTI | 1988 | Mechanical Technology Inc. |
|
|
|
|
|
|
| HFAST Update |
|
Huang, S.C. | 1990 | 3rd Stirling Thermodynamic Loss Workshop, | Cleveland, Ohio, Oct 16-17 1990 |
|
|
|
|
|
| High Performance Radiator, A |
|
Asselmen, G.A.A.;Mulder, J.;Meijer, R.J. | 1972 | Philips Research Laboratory, IECEC | SAE#729132 |
|
865-874 |
|
|
|
| High Performance Split Stirling Cooler Program |
|
|
1983 |
|
NTIS#AD-A123768/4 |
|
|
|
|
|
| Highlights from 6500 Hr of Stirling Operation |
|
Heffner, F.E. | 1965 | SAE meeting Jan 11 65 | SAE#650254/Paper#949D, GMR-456 |
|
pp. 33-48 memo | Good discussion of the Phillips design program | and its results. Photographs | work done at General Motors Research |
| High-Power baseline and Motoring Test Results for the GPU-3 | Stirling Engine | Thieme, L.G. | 1981 | NASA | DOE/NASA/1040-79-6 | NASATM-82646 |
|
June 81 |
|
|
| Historical perspective on Stirling engine performance, A | Paper | West, Colin D. | 1988 | IECEC 23rd Conf./ASME Vol. 1 | SAE#889004 |
|
pp.11-14 |
|
|
|
| Historical Review of Stirling Engine development in the USA | 1960-1970 | Percival, W.H. | 1974 | ERDA\NASA July |
|
NASACR-121097 |
|
|
|
|
| History and Overview of Stirling Engines |
|
Percival, W.H. | 1981 | Proc. 8th Energy Tech Conf. March 1981 |
|
|
pp. 624-45 |
|
|
|
| History of the Machine, A | Book | Strandh, Sigvard | 0 | A&W Publishers, NY | illustrations of early Stirling engines |
|
pp. 136-137 | Book describes all types of machines that produce | power, drawings and diagrams |
|
| History of the Philips Company, Pt 1 |
|
Heerding, A. | 1986 | Cambridge |
|
|
|
Martinus Nijhoff, Den Haag,(translation) |
|
|
| History of the Stirling Engine |
|
|
1973 | Road and Track |
|
|
83 |
|
|
|
| HoMach of England Starts Development of the Thermomechanical | Generator | Cooke-Yarborough, E.H. | 1981 | Stirling Engine Newsletter, Nov 81 |
|
|
14 |
|
|
|
| Hostile Environmental Conditions facing candidate Alloys for | the Automotive Stirling Engines |
|
1981 |
|
NTIS#DE81025915 |
|
|
|
|
|
| Hot Air Competition, The |
|
Chaddock, D.H. | 1976 | Model Engineer, vol 143 May 20 |
|
|
558-568 |
|
|
|
| Hot Air Engine |
|
Girandon | 1886 | Iron Age, Aug. 12 |
|
|
|
|
|
|
| Hot Air Engine |
|
Anderson | 1885 | Scientific American Supplement Aug 22, 1885 |
|
|
|
|
|
|
| Hot Air Engine |
|
Clapham, E.F. | 1977 | Model Engineer, Vol 134, Aug 5,. Aug 19 |
|
|
852-856,908-912 |
|
|
|
| Hot Air Engine runs quietly and cleanly |
|
Wilkins, G. | 1971 | Mechanix Illustrated, October |
|
|
68-71 |
|
|
|
| Hot Air Engine suitable for powering a small boat |
|
Slack, A. | 1973 | Model Engineer, Vol 139, Nov 2 |
|
|
1072 |
|
|
|
| Hot Air Engine with Rhombic Drive, A |
|
Begg, W. | 1976 | Model Engineer, vol 142 |
|
|
296-349 |
|
|
|
| Hot Air Engine, A |
|
Clifton,Charles | 1975 | Model Engineer | 17 Jan 1975 |
|
pg. 75 | Short article on Model Hot Air Engine |
|
|
| Hot Air Engine, A | Suitable for powering a small boat | Slack, A. | 1973 | Model Engineer 2 Nov. 1973 |
|
|
pp. 1072-1074 | Plans of Model Hot Air engine |
|
|
| Hot Air Engines |
|
Sier, R. | 1973 | Model Engineer, vol 139, |
|
|
298,376,444 |
|
|
|
| Hot Air Engines and the Stirling Cycle |
|
Fabbri, S. | 1957 | Metano, vol 11 |
|
|
1-9 |
|
|
|
| Hot Air Engines-the regenerator |
|
Urwick, W.D. | 1975 | Model Engineer, Vol 141 Parts I,II Feb 7,21 |
|
|
140 and 179 |
|
|
|
| Hot Air Era, The | Article | Lamm, Micheal | 0 | Compass Magazine, in-house Mobil Oil Pub. |
|
|
pp. 18-23 | Story of John Ericsson and his attempts to power | a ship by Hot Air Engines | Micheal Lamm, Stockton, CA |
| Hot Air Power |
|
|
1980 | Machine Design June 80 |
|
|
|
|
|
|
| Hot Air Pumping Engines Catalog |
|
Rider-Ericsson Engine Co | 1906 | Rider-Ericsson Engine Co. |
|
|
2 | Pages from Rider-Ericsson catalog 1906 with | letters from satisfied customers |
|
| Hot chips chill out with 19th century heat pump cooler | based on Stirling Cycle | Cleary, Daniel | 1992 | New Scientist, Feb. 29, 1992 n1810 |
|
|
26 |
|
|
|
| Hot Piston Ring Tests: Final report |
|
Allen, D.J.;Tomazic, W.A. | 1987 | NASA Lewis Research Center/DOE | NTIS#N88144860 | NASATM-100256 | 17p |
|
|
|
| Hot Piston Ring/Cylinder Liner Materials: Selection and | Evaluation: Final report | Sliney. H.E. | 1988 | NASA Lewis Research Center | NTIS#N88158720 | NASATM-100276 | 19p |
|
|
|
| Hot-Gas Engines |
|
Reed, B. | 1968 | Gas & Oil Power vol 4 no.739 Jan 1968 |
|
|
8-11 | Discusses Hot Gas,engine. Cold gas engine, | refrigerating machine and heat pumps |
|
| HOTS to WATTS: The FPSE Linear Alternator System re-invented |
|
Corey, John ; Yarr, George | 1992 | IECEC 27th Proceedings\Clever Fellows Conssortium | SAE#929261 |
|
5.289-5.294 | Clever Fellows Innovation Consortium Inc. |
|
|
| How to build a model Air Cooled Hot Air Engine |
|
Watson, Harry | 1961 | Popular Science |
|
|
pp. 142-145 | Detailed plans for a small Hot Air Engine |
|
|
| How Unconventional Stirling Engines can help conserve energy |
|
Martini,W.R.;White, M.A.;Desteese, J.G. | 1974 | IECEC 9th Conf. Proc. San Francisco, CA | SAE#749151 |
|
1092-1099 |
|
|
|
| Huge He Plant's Completion by Exxon will ease market | (Helium) |
|
1987 | Japan Chemical Week issue 1396 Jan 1, 87 |
|
|
|
|
|
|
| Hybrid Heat Engine/Electric systems study |
|
Meltzer, J.; Lapedes, D. | 1971 | Aerospace Corp., El Segundo, CA, June 1 |
|
|
|
|
|
|
| Hybrid Stirling Engine, A |
|
Senft, Dr. James R. | 1981 | Engineering in Miniature Sept-Nov 82 | SAE#819785 |
|
|
also by Sendft, The Hybrid Stirling Engine | IECEC 16th Conf. Atlanta |
|
| Hydraulic and Rotary Drive Stirling Engines with fluidized | bed combustion/Heat pipe system | Dunn, P.D.;Rice,G.;Thring, R.H. | 1975 | IECEC 10th Conf. Proc. Newark, NJ Aug 17-22 | SAE#759141 |
|
942-947 | Dept of Engineering\Cybernetics, Univ of Reading |
|
|
| Hydrodynamic lubrication of Stirling Engine rod seals |
|
Krauter, A.I. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg. Troy, MI |
|
|
|
|
|
|
| Hydrogen Damage |
|
Beachem, C.D. | 1977 | American Society of Metals, Metals Park, OH |
|
|
|
|
|
|
| Hydrogen permeability of ceramics and metals |
|
Yates, D. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy, MI May |
|
|
|
|
|
|
| Ideal Adiabatic Cycle-a rational basis for Stirling, The | Engine Analysis | Urieli, I., Kushnir, M. | 1982 | IECEC 17th Proceedings, | SAE#829275 |
|
|
|
|
|
| Identification of a Stirling Engine's torque characteristics |
|
Reader, G.T.;Raylor, D .R. | 1983 | IECEC 18th Conf. Proc. | SAE#839151 |
|
923-926 |
|
|
|
| IEA Dish/Stirling system Design Guidelines |
|
Stine, W.B. | 1992 | International Energy Agency Solar Paces Task I | Working Group Meeting, Almeria, Spain |
|
|
|
|
|
| Implantable Energy source for Artificial Hearts | Artificial Heart 1 | White, M.A. | 1985 | Spring-Verlag, Berlin&New York | ISBN 4-431-70513-9 |
|
36-48 | Proceed. of 1s Int. symposium on current problems | for further developing of Artificial Heart and | Assist devices. |
| Implanted Energy Conversion System |
|
Holmgren, J.S. | 1970 | MDAC Annual Report | Report No. PH43-67-1408-3 June 29,1969-July 7,1970 |
|
|
Also Report by Johnson, R.P. No. PH43-67-1408-5, | and 6, Annual Reports, 1971-72,73 |
|
| Implanted Energy Conversion system |
|
Johnston, R.P.;Baker,L.P.;Bennett,A. | 1968 | MDA Annual Report | No. MDC-G4448, 1975-76 |
|
|
|
|
|
| Implanted Energy Conversion system |
|
Johnston, R.P.; Emigh, S.G.;Griffith, W. | 1975 | MDA Annual Report | No. MDC-G4444, 1974-75 |
|
|
|
|
|
| Implanted thermal Engine system Development. Annual Report | 1 Sep 82-May 83 | White, M.;Nose,Y.;Whalen, R. | 1983 | Joint Center for Graduate Study, Richland WA | NTIS#PB84128909 | NIHN01HV280021 | 371p | July 83, also see PB83-109678 |
|
|
| Implanted Thermal Engine system Development. Annual report | 1 May 80-30 Apr 81 | Johnston, R.P.; Emigh, S.G.; Noble, J.E. | 1982 | Joint Center for Graduate Study, Richland WA | NTIS#PB83109678 | NIHN01HV929082 | 159P | JCGS8107277 | Funder: National Heart, Lung and Blood Inst, | Bethesda MD Devices and Technology Branch |
| Implanted Thermal Engine System Development. Final Report | 1 May 81-31-Aug 82 | White, M.A.;Johnston, R.P.Emigh, S.G. | 1982 | Joint Center for Graduate Study, Richland, WA | NTIS#PB83142489 | NIHN01HV929083 | 400P | Paper for National Heart, Lung and blood Inst | JCGS8204231 |
|
| Importance of Kinematics in the Stirling Engine |
|
Bougard, J. | 1975 | Review M. Mechanics, Belgium, vol 21 |
|
|
185-190 |
|
|
|
| Improved Stirling Engine performance using jet impingement |
|
|
1982 |
|
SAE#829306? |
|
|
|
|
|
| Improvement of Stirling Engine Performance by Heat Transfer | by Heat Transfer Enhancement of Heater | Wang, Jie; Yamada, Yukio;Yamashita, Iwao | 1993 | IECEC 28th Proceedings | SAE#93074 |
|
2.657 |
|
|
|
| Improvements on a 60 CM3 Inverted Yoke Drive Stirling Engine |
|
Ross, Andrew | 1986 | IECEC 21st Conf. Proc, August 1986 | SAE#869489 |
|
|
Discussion of design and testing of the D-60CC | Hot Air Engine built by Ross |
|
| In search of Stirling |
|
Edelman, H.C.M. | 1969 | The Announcer, NV Philips, Eindoven Vol 2 |
|
|
6-12 |
|
|
|
| Increasing the submerged endurance of a conventional | submarine using a Stirling Generator system | Sylvestre, R.A. | 1987 | RNEC Masters dissertation |
|
|
|
|
|
|
| Industrieetwicklungen am Stirlingmotor |
|
Zacharias, F.A.; Gartner, F. | 1975 | Vortrag an der Universitat Stuttgart |
|
|
|
|
|
|
| Influence of cyclic wall to gas heat transfer in the | cylinders of the valved Hot Gas Engine | Smith, J.L.;Lee, K.P. | 1978 | IECEC 13th Conf. Proceedings San Diego, CA | SAE#789195 check number |
|
1798-1804 | also published at MIT |
|
|
| Influence of Pressure Cycling on Thermal Regenerators, The |
|
Rea, S.N.;Smith, J.L. | 1967 | Jnl Eng. Industry, Vol 89 Series B., |
|
|
563-569 |
|
|
|
| Influence of regeneratora inefficiency on the efficicency of | a Stirling Engine dynamic energy converter | Umarov, G.; Lashkareva, T.P.;Truknov, V. | 1973 | Geliotekhnika, Vol 9, No. 3 |
|
|
58-61 |
|
|
|
| Inhomogeneity of fluid flow in a Stirling Engine | Regenerator | Jones, J.D. | 1989 | Jnl of Engr for Gas Turbine and Power V111 Oct 89 |
|
|
595-600 | Journal of Engineering for Gas Turbine and Poweer |
|
|
| Initial characterization of a Modular heat Exchanger with an | Integral Heat Pipe(NASA Lewis) | Schreiber, J.G. | 1989 | IECEC 24th Conf. Proc. / NASA Lewis Research Cente | NTIS#N89250781 |
|
8p |
|
|
|
| Initial Comparisons of Single Cylinder Stirling Engine | computer Model Predicitions with Test Results | Tew, R.C.;Thieme, L.G.;Miao,D. | 1979 | NASA Lewis Research Center f/DOE | DOE/NASA/1040-78-30 | NASATM-79044 |
|
|
|
|
| Initial Demonstration of a Fluidyne with a minimal tuning | line | Fauvel, O.R.;Walker, G. | 1987 | IECEC 22nd Conf. Proc | SAE#879100 |
|
|
|
|
|
| Initial Experiments on a lasar-driven Stirling Engine |
|
Byer, R.L. | 1976 | Conference on Laser Energy Conversion | NASA SP-395 |
|
|
|
|
|
| Initial test results from a 20KW helium charged Stirling | Engine | Clarke, LCDR M.A.; Taylor, D.R. | 1984 | Royal Naval Engineering College | SAE#849175 |
|
|
|
|
|
| Initial Test Results with a single cylinder rhombic drive | Stirling Engine | Cairelli, J.E.; Thieme, L.G. | 1977 | Proc. EDRA Highway Veh. Sys. Cont. Coord. Mtg |
|
|
|
Highway Vehicle systems Contractors Coordinators | Meeting Dearborn MI Oct 4-6 |
|
| Initial Testing of a Variable Stroke Stirling Engine. | Final Report | Thieme, L.G. | 1985 | NASA Lewis Research Center | NTIS#N85198950 | NASATM-86875 | 28p | Presented at 21st Automotive Technol Develop | Contrators coord. Meeting Dearborn MI Nov 83 |
|
| Instantaneous heat Transfer coefficients based upon two | dimentional analyses of stirling space engine components | Ibrahim, Monunir,;Lammareddu, Mohan | 1991 | IECEC 26th Conf. Proc. |
|
|
149-159 | Cleveland State University and NASA Lewis cooper- | ated in studying oscillationg flow models for | components used in space applications |
| Instantaneous heat transfer during compression and expansion | in reciprocating gas handling machinery | Faulkner, H.B., Smith, J.L. | 1983 | IECEC 18th Proceedings\MIT | SAE#839116 check number |
|
|
|
|
|
| Instantaneous Heat Transfer in Reciprocating Gas Handling | Machinery | Faulkner, H.B.; Smith, J.L. | 1981 | IECEC 18th Conf. Proc. |
|
|
724-730 |
|
|
|
| Internal Combustion Engines | Thermodynamic analysis of the Regenerative cycle | Obert, Edward F. | 1968 | Scranton., 1968 | book |
|
pp. 175-177 |
|
|
|
| Internal Combustion Stirling Engine |
|
Isshiki, N. | 1984 | 2nd Int. Stirling Engine Congress, Shanghai |
|
|
|
|
|
|
| Internal Fire | Chapter on "Hot Air Engines" | Cummins, Lyle | 1976 | Oswego Press, Lake Oswego OR | LCN 75-40701 |
|
pp. 14-27 | book includes section on Hot Air Engines and all | other types of internal combustion engines | now in 2nd printing |
| Internally Pressurized Annular Rolling Seal |
|
Tailer, Peter; Hastings, Rachel | 1991 | IECEC 26th Conf. Proc./Amer. Nu. Soc./Windfarm Mu |
|
|
245-250 | Windfarm Museum, Vineyard Haven, Mass |
|
|
| International Conference on Stirling Engines(2nd 1984) | Shanghai, China. |
|
1984 | Chinese Societyt of Naval Arch & Marine Engrs | Chinese Society of Engineering Thermophysics |
|
|
|
|
|
| Intimate thermodynamic design of Stirling gas circuit with- | out the computer | Organ, A.J. | 1991 | Proc of the Inst of Mech. Engineers, V205, Part C | #6 |
|
421-430 |
|
|
|
| Introducing engine innovations: an examination of future | markets for Brayton and Stirling automotive engines | Santini, Danilo J. | 1985 | Argonne National Lab.,Center for Transportation |
|
|
|
|
|
|
| Introducing Engine Innovations:An Examination of Future | Markets for Brayton and Stirling Automotive Engines | Santini, D.J. | 1984 | Argonne National Lab.,IL f/DOE | NTIS#DE84016319 | CONF8501151 | 40p | Aug 84 | 520915 |
|
| Introductory comments on Stirling Engine Program |
|
Barber, K. | 1975 | Automotive Power Systems Cont. Coord Mtg. Wash DC | Division of Transportation Energy Conservation |
|
|
|
|
|
| In-vehicle Stirling Engine operational experience |
|
Rosenqvist, K. | 1978 | DOE Hwy Veh. Syst. Cont. Coord. Mtg, troy MI may |
|
|
|
|
|
|
| Inventor of Hot Air Engine and Engine driven Air Pump |
|
|
1948 | The Engineer, vol 186,No.4829 Aug 13, 1948 |
|
|
168-9 | Discussion of Patent by Henry Wood, May 25, 1759 | "Working fire engine upon new principle" | Duke Univeristy Engineer Library |
| Inverted Yoke Drive Stirling Engine, The |
|
Ross, Andrew | 1985 | IECEC 20th Conf. Proc. Vol. 3 Aug.1985, Miami Bch | SAE#859074 |
|
|
Discussion of Andrew Ross's new type linkage for | two cylinder Stirling engines. Photographs, | diagrams. |
| Investigation of a 3 KW Stirling cycle Solar Power System | Vol. 1-Engine Design and Vol X Experimental evaluations | Parker, M.D.;Malik,M.J. | 1962 | Allison Division of General Motors | #1767, WADD-TR-61-122 |
|
|
vol 1-10, vol 1 Engine Design, vol 10 Experimental | evaluations |
|
| Investigation of a pressure balancing system for the | Stirling Engine | Sekya, H.; Nakazato, T. | 1991 | Trans Japanese Soc Mech. Engrs, Vol 57 No 539 B |
|
|
2449 |
|
|
|
| Investigation of the Phillips MP 1002CA Stirling Engine |
|
Clark, M.A.;Reader, G.T.;Slowly, J. | 1980 | IECEC Record | SAE#809451 |
|
2258-2264 |
|
|
|
| Irreversible power loss caused by imperfect heat | transfer in a nearly Isothermal Stirling Engine |
|
1985 |
|
SAE#859385 |
|
|
|
|
|
| Isothermal sinusoidal Analysis of balanced compound | Vuilllleumier Heat Pumps | Finkelstein, Theodore | 1992 | IECEC 27th Proceedings\Stirling Technology Inc | SAE#929498 |
|
5.161-5.166 |
|
|
|
| Isothermal Stirling Cycle Engine |
|
Kolin, Ivo | 1983 | Inter University Center Pub., Dubrovnik Croatia |
|
|
|
April 1983 |
|
|
| Isothermal Stirling Cycle with arbitrary equation of state | The | Organ, A.J. | 1977 | King's College, Univ. of London Research Report |
|
|
|
|
|
|
| Isothermal Stirling Engines |
|
Kolin, Ivo | 1982 | Univ of Zagreb Press, Zagreb Yugoslavia 1983 |
|
|
|
|
|
|
| Isothermalization of Stirling Heat Actuated Heat | Pumps using Liquid Pistons |
|
1986 | IECEC | SAE#869090 |
|
|
|
|
|
| Isotope Heat Power for dynamic power systems |
|
Schock, A. | 1976 | SAE | SAE#769198 |
|
|
|
|
|
| Japan invests in second Stirling |
|
Janssenlok, Joris | 1995 | Jane's Defense Weekly, March 11, 95 |
|
|
36 |
|
|
|
| Jim Senft's revival of the Stirling Engine discussed |
|
|
1985 | Christian Science Monitor May 7, 1985 |
|
|
25 |
|
|
|
| John Ericsson and the Age of Caloric |
|
Ferguson, E.S. | 1961 | Smithsonian Institution Press, | US Natural History Bulletin 228 |
|
|
|
|
|
| JPL Parabolic Dish Program. The |
|
|
1980 |
|
SAE#809346 |
|
|
Jet Propulsion Laboratories |
|
|
| Kinematic Stirling Engine as an Energy conversion subsystem | for Paraboidal Dish Solar Thermal Power Plants | Bowyer, J.M. | 1984 | Jet Propulsion Laboratory, Pasadena, CA f/DOE | NTIS#DE84014616 | DOEJPL106073 | 73p | 15 Apr 84 |
|
|
| Kraftsmaschine Stirlingmotor |
|
Kuhlman, P.; Zapf, H. | 1970 | VDI-nacharichten, Nr 12.25.3.70.5.18 |
|
|
|
|
|
|
| Kuumailmakoneen Renessanssi(Revival of the Air Engine) |
|
Wuolijoki, J.R. | 1948 | Teknillinen Aikakauslehti v38, n9 Sept 1948 |
|
|
291-6 | Revival of the air engine; it appears possible to | construct air engines which can fully compete with | internal combustion engines. |
| Kylmailmakoneet udessa kehitysvaiheessa | Cold air engine | Pakula, A. | 1950 | Teknillinen Aikakauslehti v40,n6 Mar 25,1950 |
|
|
123-7 | New development of cold air cycle engine, |
|
|
| La Machina di Stirling |
|
Naso, Vincenzo | 1991 | Masson Editrice, Milano, Italy 1991 |
|
|
|
|
|
|
| Laboratory Investigation of a Stirling Engine driven heat | pump | Didion, D.;Maxwell, B.;Ward,D. | 1977 | Int. Seminar on Heat Transfer in Buildings |
|
|
|
Dubrovnik, Yugoslavia, |
|
|
| Laboratory Prototype Fluidyne Waterpump, A |
|
West, C.D.,Pandey, R.B. | 1981 | IECEC 16th Proceedings Atlanta, CA Aug 1981 | SAE#819792--87? |
|
|
|
|
|
| Lambda-scheme based model for Stirling Engine, The | Paper |
|
1987 |
|
SAE#879280 |
|
|
|
|
|
| Large Capacity Industrial Stirling Machine |
|
Dros, A.A. | 1965 | Adv. in Cryogenic Engineering vol 10 |
|
|
|
|
|
|
| Large Coal-Burning Stirling Engines |
|
Walker, G.;Fauvel, R.;Srinivasan, V. | 1983 | IECEC 18th Conf. Proceedings | SAE#839152 |
|
|
|
|
|
| Large Stationary Stirling Engines. Volume 1. Conceptual | design of Stirling Engines for Stationary power...FR |
|
1980 | General Electric Co.,Phila, PA | NTIS#DE82001655 | DOEET152091V1 | 143p |
|
|
|
| Lasar-Powered Lunar Base |
|
Costen, R.; Humes, D.H. | 1989 | NASA Langley, 2nd Beamed Power Workshop, Jul 89 | NTIS#N90101569 |
|
293-316 | Discussion of the use of various sources of power | at a future Lunar base |
|
| Latent Pressure Waves in Stirling Engines |
|
Organ, A.J. | 1977 | King's College, Univ. of London, Research Report |
|
|
|
Sept |
|
|
| Leakage through clearance seals on the performance of a 10°K | Stirling Cycle Refrigerator | Keung, C.S.;Lindale, E. | 1985 | Proc. 3rd Intl. Cryocooler Conf. Boulder CO | NBS Pub. 698 US Govt. Printing Office |
|
|
|
|
|
| Lecture Notes for Free-Piston Stirling Engines Workshop | Set 1 | Wood, J.G. | 1980 | Sunpower Inc, Athens, OH Oct. 1980 |
|
|
|
|
|
|
| Les Possibilites de Moteur Stirling |
|
Underwood,A.;Tsou, M.T.; | 1963 | Ingenieurs de l'Automobile(S.I.A) v36 n12 Dec 1963 |
|
|
655-64 | possibilities of Stirling engines;historical | background,examination of work done with General | Motors with regard to heat accumulation |
| Life of Ericsson, The |
|
Church, William C. | 1890 | Scribners, New York | Vol. 1, |
|
pg 72, 189-198 | supposedly the most complete account of Ericsson's | life |
|
| Life Test Performance of a Phillips Rhombic Drive | Refrigerator with bellows seals | Lindale, E.;Lehrfeld, D. | 1983 | SPIE Proceedings, vol 364 1983 |
|
|
103-108 |
|
|
|
| Limits on the Mechanical Efficiency of Heat Engines |
|
Senft, Dr. James R. | 1987 | IECEC 22nd Conference Proc., Phila, PA Aug 87 | SAE#879071 |
|
|
|
|
|
| Linear Dynamics of Free-Piston Stirling Engines |
|
Redlich, R.N.;Berchowitz, David M. | 1985 | Proc.of Inst. of Mechanical Engineers Vol. 199 |
|
|
203-213 |
|
|
|
| Linear Harmonic Analysis for Stirling Machines and Second | Law Analysis of Four important losses | Chen, N.C.J.;Griffin, F.P.;West, C.D. | 1984 | IECEC Conference San Francisco/ORNL f/DOE | DE84016595 | CONF84080439 | 10p | NTIS505223 |
|
|
| Linear Harmonic Analysis of Free-Piston Stirling Engines |
|
Chen, N.C.J. | 1986 | Oak Ridge National Laboratories | ORNL/CON-172 1986 |
|
|
|
DE86012451 DE84016646 NTIS505224 | NTIS651934 |
| Linear Harmonic Analysis of Free-Piston Stirling Engines | NTIS Technical Note | Chen, N.C.J,;Griffin,F.P. | 1986 | Martin Marietta Energy Systems, f/ORNL | NTIS#NTN900146 (avail from Oak Ridge) |
|
|
|
|
|
| Linear harmonic Analysis of Free-Piston Stirling Engines |
|
|
|
|
DE86012451 |
|
|
651934 |
|
|
| Linear Harmonic Analysis of Stirling Engine Thermodynamics |
|
Chen, N.C.J.;Griffin,F.P.;West, C.D. | 1984 | Martin Marietta Energy systems Inc,/ORNL/f/DOE | NTIS#DE84016646 | ORNLCON-155 | 128p | Aug 84 |
|
|
| Linear Motor driven Stirling Coolers for Military and | Commercial Applications | Berry, Robert | 1992 | IECEC 27th Proceedings\Hughes Aircraft | SAE#929171 |
|
5.149-5.154 |
|
|
|
| Linear Moving Magnet Motor/Generator for Stirling Engines |
|
|
1982 |
|
SAE#829309 |
|
|
|
|
|
| Liquid Fueled EHS for the STM4-120 Stirling Motor |
|
Meijer, R.J.; Ziph, B.;Godett, T.M. | 1985 | IECEC 20th Conf. Proc. |
|
|
|
|
|
|
| Liquid Piston oscillates naturally |
|
Lowe, J.F. | 1976 | Design News, Vol 32 Feb 23 |
|
|
|
|
|
|
| Liquid Piston Seals for Stirling Machines |
|
West, Colin D. | 1988 | IECEC 23rd Conf. Proc. | SAE#889200 |
|
|
paper analyzes the power losses caused by this | type of piston seal. |
|
| Liquid Piston Stirling Air Engines |
|
Reader, G.T.;Clark, M.A. | 1984 | 2nd Int Conference on Stirling Engines | 2-19 |
|
|
held at Shanghai, China |
|
|
| Liquid-Piston Stirling Machines |
|
West, Colin D. | 1984 | Oak Ridge National Laboratories f/DOE | NTIS#DE84014255 | CONF84061691 | 19p | paper given at Int. Stirling Engine Conf | Shanghai, China 12 June 84 | book Van Nostrand 1983 |
| Literature of Stirling Engines, The |
|
Walker, G,; Fauvel,O. ;Reader G. | 1989 | Univ. of Calgary, Dept of Mech. Eng. | SAE#899058 |
|
|
|
|
|
| Lithium and Sodium for underwater propulsion |
|
White, W.D. | 1961 | Astronautics, April |
|
|
38-39 |
|
|
|
| Lithium/sodium/sulphurhexafluoride heat source in combin. | with a Stirl. engine as a prop. sys. for small submersibles | van der Sluys, W.L.N. | 1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759154 |
|
1031-1037 |
|
|
|
| Lithium/sulphurhexafluoride heat source in a combination | with a Stirl. Eng. as an envir. Indep. underwater prop. sys. | Biermann, U.P.K. | 1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759153 |
|
1023-1030 | As an environmentally independent underwater | propulsion system |
|
| Load Matching Analysis of the Mark II FPSE HAHP, Phase IIe | final report to Oak Ridge National Laboratories | Vincent, R.J. | 1991 |
|
|
|
|
|
|
|
| Long Life 50Kw STM4-120 Stirling Solar Power Conversion | Unit | Meijer, R.J. | 1985 | Jet Propulsion Laboratories, Pasadena CA | #PN821283 Dec. 1985 |
|
|
|
|
|
| Long Life Stirling Cryocooler for Space applications |
|
McFarlane, C.S.;Keung, M.A.;Shaik, M. | 1988 | Proc. Int. Cryocooler Conference, Monterey, CA '88 |
|
|
|
|
|
|
| Long life Stirling Cycle coolers for applications in the 60- | 110°K Range: Vibration Characteristics... | Lewis, C.A. | 1989 | SAE | SAE#891496 |
|
|
|
|
|
| Low Capacity Helium Liquifier, A Ross-Stirling Engine with | Zimmerman Displacer and two stage compressor... | Urielli, I.; Walker, G. | 1983 | Proc 4th Int. Cryocooler Conf. Sept. 83 | David Taylor research Center, Easton MD |
|
|
|
|
|
| Low Cost, Long Life Stirling Engine may be ideal for the | Third World | Mortimer, J. | 1975 | Engineer, London, vol 240 March |
|
|
|
|
|
|
| Low Emission Combustors for Stirling Engines |
|
Gabrielsson, R.A.; Lia,T.A | 1975 | IECEC \ United Stirling Sweden, AB & Co. | SAE#759139 |
|
927-932 |
|
|
|
| Low Emissions combustion engines for motor vehicles |
|
Newhall, H.K. | 1974 | Am. Chem. Soc. Division Fuel Chemistry Vol 19 |
|
|
15-37 |
|
|
|
| Low end dynamic characteristics of a magnetically coupled | Free-Piston Engine/compressor system | Chen, G.;McEntee,J. | 1991 | IECEC 26th Conf. Proc. Vol.5/Sunpower Inc. |
|
|
326-330 |
|
|
|
| Low Grade Heat Conversion using Bellowslik Engines. Final | Technical Report November December 15, 1983 |
|
|
|
DE86000471 |
|
|
610677 |
|
|
| Low Pollution Engines |
|
|
1971 | Scientific American Sept |
|
|
|
|
|
|
| Low Pollution Heat Engines |
|
Patterson, D.J.; Bolt, J.A. | 1975 | IECEC 10th Conf. Proc. |
|
|
779-787 |
|
|
|
| Low Power Baseline test results for the GPU3 Stirling Engine |
|
Thieme, L.G. | 1979 | NASA | April 1979 | NASATM-79103 |
|
DOE/NASA/1040-7916 1980 |
|
|
| Low Pressure High speed Stirling Air Engine. Final Report |
|
Ross, M. Andrew | 1981 |
|
NTIS#DOE/R5/10142-2 |
|
|
|
|
|
| Low Pressure Stirling Air Engine. Semi-Annual Technical | Progress Report | Ross, M. Andrew | 1979 | Andrew Ross, Columbus OH | NTIS#DE83005505 | DOER5101421 | 10p |
|
|
|
| Low Temperature Difference Stirling Engine |
|
Kolin, Ivo | 1984 | IECEC 19th Conf. Proc. Aug. 1984 | SAE#849029 |
|
|
Aug 1980, Amer. Nuclear Soc. |
|
|
| Low Temperature Stirling Engines for Waste Heat |
|
Shoureshi, R. | 1982 | IECEC 17th Conf. Proc. | SAE#829284 check number |
|
|
|
|
|
| M.E. exhibition Reports |
|
Model Engineer magazine | 1995 | Argus Books, Hemel Hemstead, HP27ST, U.K. | No. 3988, Vol. 174, 3 March 1995 |
|
273-275,291 | Results of the Duke of Edinburgh Trophy, model | building of engines etc |
|
| M.I.T. Stirling Cycle Heat Transfer Apparatus |
|
Smith, J.L.;Lienhard, J.; Tziiranis A.K. | 1992 | IECEC 27th Proceedings\MIT | SAE#929465 |
|
5.509-5.516 |
|
|
|
| Machine for many purposes |
|
Gipps, G. de V. Phillips Indus. Holdings | 1972 | Australia Engineer Mar 1975 |
|
|
8-13 | Phillips Cryogenerator installed at CIG in | Adelaide where is produces liquid nitrogen. | Discussion of Phillips PPG2500 cryogenerator |
| Machining internal fins in components for heat exchangers |
|
Walker, Graham | 1961 | Machinery, London, Vol 101 No. 2590 |
|
|
|
|
|
|
| Magnetic Bearings for Free-Piston Stirling Engines |
|
Curwen, P. W.;Fleming, D.P.;Rao,D.K. | 1992 | IECEC 27th Proceedings\MTI\NASA Lewis | SAE#929383 |
|
5.381-5.386 |
|
|
|
| Magnetically coupled Stirling Engine driven heat pump; | design optimization and operating cost analysis | Vincent, R.J., Waldron, W.D. of MTI | 1990 | IECEC 25th Conf. Proc. | NTIS#DE90011242 |
|
23P |
|
|
|
| Making Ice |
|
Herschel, J. | 1850 | The Athenaeum, Jan 5. |
|
|
5 |
|
|
|
| Making Stirling Engines |
|
Ross, Andrew | 1993 | Ross Experimental |
|
|
|
Andrew Ross, 1660 W Hederson Rd. Columbus OH | 43220 |
|
| Malone Engine |
|
Malone, J.F.J. | 1931 | Royal Society of Arts Journal, June 12, 1931 |
|
|
|
Malone engine works on regenerative cycle like | Stirling but employs liquid instead of air |
|
| Malone Refrigeration |
|
Swift, Greg W. | 1990 | ASHREA Journal v32 Nov. 90 |
|
|
|
|
|
|
| Manadon Ticorne-a Stirling Engine Design Study, The |
|
Shipperly, I. | 1984 | Royal Engineering College, Plymouth |
|
|
|
RNEC dissertation BEng |
|
|
| Management of the CO2 produced in fossil fuelled Stirling | Engine power systems | Reaader, G.;Mathews, J. Walker, G. | 1992 | IECEC 27th Proceedings\Univ. of Calgary | SAE#929403 |
|
5.477-5.482 |
|
|
|
| Manifest: A computer program for 2-D Flow Modeling in | Stirling Machines: Final report | Gedeon, David R. | 1989 | Gedeon Associates, Athens, f/NASA | NAS126182290 |
|
|
|
|
|
| Many experts such as 700 scientists, scholars who met at | Energy conversion engineering conference...Article | Bukro, Casey | 1986 | Chicago Tribune, Sept 14, 1986 |
|
|
|
18 column inches | illustrations |
|
| Marine Applications for the Stirling Engine |
|
Reader, Graham T. | 1984 | 2nd Int Conf. on Stirling Engines, Shanghai,China | #1-14 |
|
|
|
|
|
| Marine Stirling Engine, The |
|
Reader, Graham T. | 1982 | IECEC 17th Proc.\Royal Navy Engineering College | SAE#829287 |
|
|
RNEC located in Plymouth, England |
|
|
| Markets for New Transportation Technologies |
|
|
1980 |
|
|
CONF791009-14 |
|
|
|
|
| Mars Sample Return Power supply. Final Report |
|
Hoang, D.; Ludwigs, S. | 1988 | Texas A&M Univ, f/NASA | NTIS#N89164610 | NAS126184708 | 74p |
|
|
|
| Martini Engineering Designs a Stirling Cycle Heat Pump |
|
|
1981 | Stirling Engine Newsletter, Nov 1981 |
|
|
11 |
|
|
|
| Martini Memorial volume-First Supplement 1987-1991 |
|
|
|
|
|
|
116 | order from Brad Ross |
|
|
| Martini Memorial Volume-IECEC Abstracts 1966-1986 |
|
Martini, William |
|
Martini Engineering |
|
|
175 pps | order from Brad Ross |
|
|
| Martini-Ringbom Stirling Engine |
|
Barnes, C. Sykes, M, Reader G. | 1987 | IECEC Royal Naval Engineering College | SAE#87---- |
|
pp. 1803-1806 |
|
|
|
| Matching of a Free-Piston Stirling Engine coupled with a | Free-Piston Linear compressor for a heat pump application | Marusak, T.J., Chiu, W.S. | 1978 | IECEC Proceedings/G.E. Space Division | SAE#789272 |
|
1820-1825 | G.E. Space Division, King of Prussia, PA |
|
|
| Materials for a Stirling Heater Head |
|
Noble, J.E.;Lehmann, G.A.;Emigh,S.A. | 1990 | IECEC 25th Conf. Proceedings\Stirling Tech. Co. | SAE#900272 |
|
281-289 |
|
|
|
| Materials Technology Assessment for Stirling Engines |
|
Stephens, J.R.,Witzke, W.R. | 1977 | NASA | 1977 | NASATM-73789 |
|
|
|
|
| Materials Technology assessment for Stirling Engines |
|
Stephens, J.R.; Witzke,W.R.;Watson, G.K. | 1977 | NASA\DOE CONS/1011-22, NTIS |
|
NASATM-73789 |
|
|
|
|
| Mathematical Model for Ringbom Engine Operation |
|
Senft, Dr. James R. | 1985 | Transactions, ASME Jour. of Engineering for Gas | Turbines and Power, Vol 107, July 1985 |
|
|
UW-RF Research Report, 1982 |
|
|
| Mathematical Analysis of a Vuileumier Refrigerator, A |
|
Sherman, A. | 1971 | ASME Winter Meeting November | Paper 71-WA/HT-33\NASA TM-X65534,X-763-71-125 |
|
|
|
|
|
| Mathematical Model for steady operation of Stirling type | Engine | Qvale, E.B.;Smith, J.L. | 1967 | ASME paper at meeting Nov 12-17 1967 | ASME#67-WA/Ener-1 |
|
6 | Various components are analyzed separately for | cyclically steady conditions | also in Jnl of Power Engineering 1968 Vol 90 |
| Mathematical Modeling of a Jet-Stirling Fluidyne, The |
|
Gill, P.F. | 1980 | Royal Naval Engineering College | RNEC-SERF-F1-80, May 1980 |
|
|
|
|
|
| Mathematical Modeling of a low speed gas-liquid Heat Engine |
|
Parise, J.A.R. | 1989 | Pontif. Univ. Catolica de Rio de Janeiro | SAE#899067 |
|
pp. 2565-2570 |
|
|
|
| Matini-Weiss, A Stirling Engine simulation Program and | Design Aid for PC's, User Manual | Weiss, M.H.;Walker, G.; Fauvel, O.R. |
|
|
|
|
|
|
|
|
| Mean-Parameter Modeling Oscillating Flow |
|
Gideon, D. | 1986 | Journal of Heat transfer, Vol 108 |
|
|
513-518 |
|
|
|
| Measured performance of a large Aircharged Ringbom- | Stirling Engine |
|
1985 |
|
SAE#859143 |
|
|
|
|
|
| Measured Performance of an Experimental Vuilleumier Heat | Pump in Comparison to 3rd Order theory | Kuhl, H.D. | 1990 | IECEC 25th Proceedings, Reno, NV |
|
|
|
|
|
|
| Measurement of Losses in a Stirling Cycle Cooler |
|
Orlowska, A.H.;Davey, G. | 1987 | Cryogenics Vol 27 |
|
|
|
|
|
|
| Measurement of Rod Seal Lubrication for Stirling Engines |
|
|
1981 |
|
NTIS#N81-13359/7 |
|
|
|
|
|
| Measurements with the Reversing Flow test Facility |
|
|
1987 |
|
SAE#869119 | NTIS#DE87001515 |
|
723,960 |
|
|
| Mechanical Efficiency of a Rhombic Drive Stirling Cycle | Machine | Organ, A.J. | 1978 | IECEC 13th Conf. Proc. San Diego, CA, Aug 20-25 | SAE#789352 |
|
1841-1852 | from Kings College, London |
|
|
| Mechanical Efficiency of Kinematic Heat Engines |
|
Senft, Dr. James R. | 1987 | Journal of the Franklin Institute vol. 324 No. 2 |
|
|
273-290 |
|
|
|
| Mechanical engineering problems in energetics, Stirling | Engines | Martini, W.R.;Johnston, R.P.;Noble J.E. | 1969 | ASME Nov 16, Meeting/Donald Douglas Lab, Richland | ASME#69-WA/Ener-15 |
|
16p | History of engines is reviewed, updated with | new developments, discusses efficiences over 50% | future applications |
| Mechanical losses in Rolling Seals |
|
|
1986 |
|
SAE#869129 |
|
|
|
|
|
| Megawatt Class Nuclear Space Power Systems(MCNSPS) concept. | design and Eval. report. Vol. 1. objectives, summary results | Wetch, J.R. | 1988 | Space Power Inc., San Jose, CA f/NASA | NTIS#N89179410 |
|
40p Sep 88 |
|
|
|
| Metal Combustion energy drives Stirling Engines under the | sea |
|
1969 | Product Engineering Vol 40 Dec 15 |
|
|
104-5 |
|
|
|
| Metal spring for tuning and positioning the displacer | of a Short Stroke Stirling Engine |
|
1985 |
|
SAE#859072 |
|
|
|
|
|
| Method and apparatus for inducing Heat changes |
|
Vuilleumier, R. | 1918 | U.S. Patent | #1275507 |
|
|
|
|
|
| Method and Device for Balanced compounding of Stirling | Cycle machines | finkelstein, T. | 1980 | U.S. Patent Office | #4199945 April 29, 1980 |
|
|
|
|
|
| Method of characteristics applied to the Stirling Engine,The |
|
Taylor, D.R. | 1984 | Royal Navy Engineering College | SAE#849177 |
|
|
|
|
|
| Method of optimizing heat exchangers for a Stirling Engine |
|
Umarov, G.; Trukov,V.S.;Orunov, B.B. | 1976 | Geliotekhnika, No 6 |
|
|
18-23 |
|
|
|
| Microcomputer simulation of Stirling cfryocoolers |
|
Fauvel, O.R. | 1989 | Cryogenics |
|
|
|
|
|
|
| Microprocessor based Stirling Engine Design Aid |
|
Weiss, M.H.;Walker, G.;Fauvel, O.R. | 1988 | IECEC 23rd Conf. Proc. Vol 1, | SAE#889117 |
|
49-53 | computer assisted design aid to simulate | performance of a stirling engine |
|
| Military applications of Stirling Cycle Machines |
|
Walker, Graham | 1968 | IECEC 3rd Conf. Proc. Vol 1 Boulder, CO |
|
|
1008-1016 | Discusses how little use the military has made | of Stirling engines, in Europe development is | much further along in use by the military |
| Military Engines for Ground Power |
|
Horton, J.H. | 1966 | Automotive Industry, May 1 |
|
|
65-67 |
|
|
|
| Miniature Long-Life Stirling Engine to power an Artificial | Heart | Johnston, R.P. | 1978 | IECEC 13th Conf. Proc. |
|
|
255-260 |
|
|
|
| Miniature Refrigerators for Cryogenic Sensors and Cold | Electronics | Walker, Graham;Fauvel, R.; Reader, G. | 1989 | American Inst. Chem. Eng. Journal Vol35 June 89 |
|
|
1003-1016 | also a book, Springer Verlag, Berlin& New York | Monograph series on Cryogenics |
|
| Miniature Refrigerators for electronic devices | duplicate publication | Daniels, A.; DuPre, F.K. | 1971 | Philips Technical Review, vol 32 |
|
|
49-56 |
|
|
|
| Miniature Refrigerators for electronic devices |
|
Daniels, A.; DuPre, F.K. | 1973 | Cryogenics, Vol 13, March |
|
|
1340140, |
|
|
|
| Miniature Refrigerators for Spacecraft use. |
|
Walker, Graham | 1989 | Oxford University Press UK |
|
|
|
|
|
|
| Miniature Stirling Cryocoolers: Trends in Development |
|
Walker, Graham. | 1986 | Proc. 3d Int. Stirling Eng. Conf. Rome | Paper No. 50 see 21st IECEC |
|
|
|
|
|
| Miniature Stirling Cryocoolers: Trends in development | duplicate publication | Walker, Graham | 1986 | Cryogenics Vol 26 |
|
|
387-91 |
|
|
|
| Miniature Stirling Engines for artificial heart power |
|
White, M.A. | 1983 | IECEC 18th Conf. Proceedings, Orlando | SAE#839111 |
|
694-701 |
|
|
|
| Miniature TES power powered Stirling Cycle Engine |
|
Schneider, J.A., Holl, S.L. | 1984 | NJimbus Inc, Rancho Cordova | SAE#849114 duplicate number |
|
|
|
|
|
| Miniature, Vibration free Rhombic Drive Stirling Cycle | Cooler | Storace, A. | 1971 | Adv. Cryogenic Engineering, vol 16 |
|
|
185-194 | Cryogenic Engineering Conf., June 70 |
|
|
| Mit Electro-Warme Speicher und Stirlingmotor |
|
Meijer, R.J. | 1969 | Deenkschrift, Vol 11 |
|
|
143-164 | Electro-fahrzeuge, Deutsche forschungsgemeinschaft |
|
|
| Mobility engineers test Stirling Cycle Engine. |
|
|
1963 | Automotive Industries, v 129, n3 Aug 1, 1963 |
|
|
35-37 | Experimental 6 hp Stirling Cycle engine is being | tested at Army Mobility Command Engineer Center | Ft. Belvoir, |
| Mod I Automotive Stirling Engine Mechanical Development |
|
Simetkosky, M.A. | 1984 | SAE Int. Congress and Exposition Mar 84 | SAE#840462? |
|
|
Discussion on development and work progress on | automotive Stirling engine |
|
| Mod I Stirling Engine Powertrain development |
|
|
1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, May |
|
|
|
|
|
|
| Mod II Engine and Technology Development |
|
Ernst, William D. | 1984 | IECEC 19th Conf. Proc., Aug 19-24\MTI | SAE#849128 |
|
|
|
|
|
| Mod II Automotive Stirling Engine Design Description and | Performance Projections | Richey, Albert | 1986 | SAE | SAE#860059 |
|
pp. 1370-1377 | Discussion of Mod II engine criteria at Mechanical | Technology Inc. |
|
| MOD II engine and technical development |
|
Ernst, William D. | 1984 | IECEC 19th Conf. Proc./MTI | SAE#849127 |
|
|
|
|
|
| Mod II Engine Development |
|
Karl, David W. | 1987 | IECEC 22nd Conf./AIAA Aug. 10-14/MTI | SAE#879158 |
|
pp. 1810-1816 | Discussion on development of MOD II engine | at MTI, current work |
|
| Mod II Stirling Engine Design and Performance |
|
Grandin, A.W. Richey Albert E. | 1985 | Automotive Tech Development Contractors | Coordination Meeting Oct 1985 PR257/85ASE472PR37 |
|
|
|
|
|
| Model Air Engine Runs on any fuel |
|
Walton, Harry | 1949 | Popular Science |
|
|
pp. 194-196 | Discussion of Model Hot air engines | mention of article in PS Feb 1948 pg 145 |
|
| Model of In-Cylinder Heat Transfer with Inflow produced | turbulence | Kornhauser, Alan. | 1992 | IECEC 27th Proceedings\Virginia Polytechnic Inst | SAE#929467 |
|
5.523-5.528 |
|
|
|
| Model of Stirling Engine heat exchangers based on true bond | graphs method |
|
1987 |
|
SAE#879344 |
|
|
|
|
|
| Model of the TPTC Stirling Engine with adiabatic working | space | Counts, M. | 1988 | Jrnl of Engr for Gas Turbine and Power V110 Oct 88 |
|
|
658-663 |
|
|
|
| Modeling and Simulation of the Thermal Control System for | the 25 KW Advanced Stirling Conversion System | Rosswurm, Mark A. | 1991 | IECEC 26th Conf. Proceedings, Vol 5 Boston Aug 4-9 | SAE#910849 |
|
331-336 |
|
|
|
| Modeling Stirling and Hot Air engines | Book | Rizzo, James G. | 1985 | Patrick Stephens Ltd, England | ISBN 0-85059-736-6 |
|
|
Numerous models to build. | Address: Dennington Estates, Wellingborough | Northents, NN8 2QD, England |
| Modeling, design and optimization of Stirling Engines |
|
Finkelstein, Theodore | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug 20-25 |
|
|
|
|
|
|
| Modelling the Jet-Stream Fluidyne |
|
Reader, G.T.;Ivett, G.;Gill, P. | 1981 | IECEC 16th Proceedings/ASME August 1981 | SAE#819792 check number |
|
|
|
|
|
| Modes of operation of a Jet-Stream Fluidyne |
|
Reader, G.T.;Lewis, P.D. | 1979 | IECEC Record 1979 |
|
|
1089-1102 |
|
|
|
| Modified Stirling cools Tansport |
|
|
1988 | Machine Design Vol 60, January 7, '88 |
|
|
82 | diagram |
|
|
| Modified Philips-Stirling Cycle for very low temperatures,A |
|
Prast, G. | 1964 | Int. Adv, in Cryogenic Engineering Vol 10 |
|
|
40-45 |
|
|
|
| Modified Stirling cools transport |
|
|
1988 | Machine Design Vol 60 Jan 7, 88 |
|
|
82 |
|
|
|
| Moglichkeiten des Stirling-Fahrzeugmotors in unserer | kunftigen Gesellschaft | Meijer, R.J. | 1972 | Schwezerische Technische Zeitung, STA 69 31/32 |
|
|
649-660 |
|
|
|
| Moriya, a 10 inch Stirling Powered Fan |
|
Senft, Dr. James R. | 1974 | Live Steam, Vol 8,No. 12;Vol 9,No.1;Vol 9, No2 |
|
|
10 |
|
|
|
| Moteurs alternatifs a combustion interne |
|
Arques, Ph | 1987 | MASSON, Paris FR |
|
|
6 |
|
|
|
| Mother's Minto Wheel: A Report |
|
|
1976 | Mother Earth News, 40, July 76 |
|
|
pp. 102-103 |
|
|
|
| MS*2 Stirling Cycle Code |
|
Mitchell, M.P. | 1992 | Proc. 7th I.C.C. |
|
|
|
|
|
|
| MTI Stirling Engine powertrain development |
|
Decker, O. | 1978 | DOE Highway Veh. Syst. Cont. Coord. Mtg. Troy, MI |
|
|
|
May Meeting | Contractors Coordinating Meeting |
|
| Multicylinder Free-Piston Stirling Engine for application | in Stirling Electric Drive Systems ,A | Graaff, Peter J. | 1991 | IECEC 26th Conf. Proc./American Nuclear Society |
|
|
205-209 | address:Loondermolen 61, 5612 MJ Eindhoven, | the Netherlands |
|
| Multi-cylinder Stirling Engine Heat Pumps with double acting | Free-Pistons |
|
1982 |
|
SAE#829296 |
|
|
|
|
|
| Multifuel Stirling auto engine tested |
|
|
1986 | Machine Design Vol 58 Dec 11, 86 |
|
|
16 |
|
|
|
| Multifuel Stirling Auto Engine tested |
|
|
1986 | Machine Design, Vol 58, December 11, 1986 |
|
|
16 | illustrated |
|
|
| Multifuel Thermal Energy Converters |
|
Hazard, H.R. | 1964 | Proc 18th Ann. Power Sources Conf. Ft. Monmouth |
|
|
|
May 19-21 |
|
|
| Multifueled Stirling Engine for a Cogeneration system |
|
Johansson, L.; Agno, J.G. | 1981 | Am. society of Agricultural Engineers June 81 |
|
|
8p | Presented at Orlando, FL 21-24 June 81 |
|
|
| Multihundred Watt Radioisotope Thermo Electric Generator |
|
Pitrolo, A.A. | 1971 | IECEC 6th Conf. Proc, Boston, MA Aug 2-6 |
|
|
|
|
|
|
| Multiparameter Analysis of Stirling Engines for Optimal | Design | Carlini, M.;Abenavoli, Impero;Kormanski | 1991 | IECEC 26th Conf.,/Univ. of Rome/Tech. Univ Gdansk |
|
|
299-303 |
|
|
|
| Muscrip Stirling Engine: A new departure |
|
Muscrip, William M. | 1984 | MSE Energy Inc | SAE#849089 |
|
|
POB 7775, Fredricksburg, VA 22404 |
|
|
| Naheraungsverfahren zur Berechnung des Warmeaustausches in | Regeneratoren | Hausen, H. | 1931 | Z. angew. Math Mech, Vol 11, April |
|
|
105-111 | An approximate method of dimensioning regenerative | heat exchangers |
|
| Napier and Rankine's Hot Air Engine machines |
|
Napier, J.; Rankine, M. | 1854 | Mechanics Magazine, No. 1628 Oct. 21, 1854 |
|
|
|
|
|
|
| NASA Lewis Stirling Engine Computer Code Evaluation. | Final Report | Sullivan, T.J.(Sverdrup Tech. Inc.) | 1989 | NASA & Sverdrup Technology, Inc, Cleveland, OH | NTIS#N89247415 |
|
43p jan 89 |
|
|
|
| NASA Lewis Stirling SPRE testing and Analysis with reduced | number of cooler tubes | Wong, W.; Cairelli. J.W.;Swec, Diane | 1992 | IECEC 27th Proceedings\NASA Lewis Res. Center | SAE#929396 |
|
5.443-5.448 |
|
|
|
| NASA/CSTI High Capacity Power Program |
|
Winter, J.M. | 1991 | NASA | NTIS#N9216481/31/GAR | NASATM-105240 |
|
|
|
|
| Natural coordinates for analysis of the practical Stirling | cycle | Organ, A.J. | 1993 | Proc. Inst Mech. Engrs 206 pt C. |
|
|
407-416 |
|
|
|
| Natural Gas fueled Combustor for a 3kW Stirling Engine |
|
Waldron, W.D.; Riecke, G.T. | 1991 | IECEC |
|
|
|
|
|
|
| Natural" coordinates for analysis of the practical | Stirling Cycle | Organ, A.J. | 1992 | Proc. of the Inst. of Mech. Engrs Vol 206 No. 6 | Part C. |
|
407-16 |
|
|
|
| Navy two to ten k(W)e radioisotope power system for undersea | applications | Starr, M.D.; Hagey, G.L. | 1968 | IECEC 3rd Conf. Proc, Boulder, CO |
|
|
|
|
|
|
| Need to replace CFCs in refrigeration interest in 19th | century engine | Naj, Amal Kumar | 1991 |
|
Wall Street Journal, April 1, 1991 p B4 col 1 |
|
|
|
|
|
| New Air Engine, A |
|
staff | 1889 | Power and Steam magazine, October 1889 v9,No.10 |
|
|
front page | Article desribing the Ticonderoga engine installed | in Boston, very large engine, probably the biggest | Hot Air engine built |
| New Chromium Carbide based technology coating for use to 900 | Deg. C. with particular reference to the Stirling Engine |
|
|
N86-21682/7 |
|
|
|
633679 |
|
|
| New Concept for a Nuclear Power Marine Propulsion Plant |
|
Garay, Paul N. | 1960 | Naval Eng. Jnl, ASNE, Washington, DC Nov. |
|
|
|
ASNE Inc. | 1012 14th St. NW, washington, DC 20005 |
|
| New Concept, Hermetically Sealed 4-Cylinder, Double | Acting Stirling Engine | Carlqvist, Stig G., Gothberg, Y. | 1989 | CMC Aktiebolag, Malmo & Swed-Recom AB | SAE#899264 |
|
2265-2270 | IECEC 24th Conf, |
|
|
| New Concept, Hermetically Sealed Stirling Engine |
|
Carlqvist, Stig G. | 1988 | 4th Int. Conference for Stirling Engines | Tokyo, Nov. 1988 |
|
|
|
|
|
| New Developments in Free-Piston Stirling Engines |
|
|
1978 | Inst. Gas Tech Seminar Stirling Cycle Prime Movers |
|
|
|
Chicago, Ill, June 78 |
|
|
| New Engine/Heat Pump in the Stirling Tradition, A |
|
Mitchell, M.P. | 1984 | IECEC 19th Conf. Proc. |
|
|
1836-1842 |
|
|
|
| New Hot Air Engine |
|
|
1889 | Power and Steam Magazine, Oct 1889 | Vol 9, No. 10 |
|
|
|
|
|
| New Life for Solar? |
|
Ashley, S. | 1989 | Popular Science | May 1989 |
|
pp. 134(5) |
|
|
|
| New look at the Swash Plate drive, A |
|
Maki, E.R.; DeHart, A.O. | 1971 | SAE | SAE#710829 |
|
|
|
|
|
| New Mathematical Model for Stirling Cycle Machines., A |
|
Berchowitz, D.M.;Rallis, C.J.;Urieli, I. | 1977 | IECEC 12th Conf. Proc. Wash. DC Aug 28-Sept 2 | SAE#779254 |
|
|
|
|
|
| New Mechanical linkage for Stirling Cycle Machines |
|
Wood, J. Gary, Albany Ohio | 1987 | IECEC 22nd Conf. Proc./ AIAA | SAE#879422 |
|
pp. 1902-1906 | Technical discussion on a single cylinder Ross | type linkage. Diagrams |
|
| New ported constant volume external heat supply regenerative | cycle | Rallis, C.J.;Urieli, I.;Berchowitz,D.M. | 1977 | IECEC 12th Conf. Proc. Washington DC Aug 28-Sept 2 | SAE#779256 |
|
1534-1537 |
|
|
|
| New Possibilites for the Air Engine |
|
Rinia, H. | 1946 | Proc Kon Ned. Akad. Wet.,Vol 49, Amsterdam ND |
|
|
150-155 | Given before the Royal Netherlands Academy of | Sciences, Jan. 26, 1946 |
|
| New Prime Mover, A |
|
Malone, J.F.J. | 1931 | Engineer, London, July 24, 1931 |
|
|
97-101 | and 1931 Jnl of Royal Society of the Arts vol 79 | pg 679-709 |
|
| New Prime Movers for ground transportation |
|
Ward, E.J.; Spriggs, J.G. | 1972 | IECEC 7th Conf. Proc, San Diego, CA |
|
|
1013-1021 |
|
|
|
| New Proposal for Standardization and Nomenclature for a | Stirling Machine Report | Naso, Vincenzo; Lista, Paulo | 1991 | Inter Stirling Engine Conf, Dubrovnik | ISEC#91077, IECEC 26th conf. 1991 |
|
|
May 1991. Dipartmento di Meccanica e Aeronautica | Universita degli Studi di Roma "La Sapienza" Italy | also at IECEC 26th Conf. Aug. 1991 |
| New Regenerator model for Stirling Cycle Machines, A |
|
Urieli, I. | 1976 | Univ. of Witwatersrand, Dept of Mech. Eng. | Report No. 67 |
|
|
|
|
|
| New Regenerator Theory, A |
|
Jones, John D. | 1982 | IECEC Proceedings\Univerisity of Reading | SAE#829274 |
|
1656-61 |
|
|
|
| New Research Work regarding an old machine |
|
Boltz, C.L. | 1948 | Antriebstechnik vol 13, March-April |
|
|
3-4 |
|
|
|
| New Solar Stirling Engine TNT-1 with direct internal | Radiation Heating | Isshiki, N, Hasimoto,K.;Watanabe, H. | 1989 | IECEC 24th Conf. Proc. | SAE#899260 |
|
2419- | Nihon Univ, Koriyama; Tohoku Gakin Univ, Tagajo | Tohoku Electric Power Co., Sendai, Japan |
|
| New Stirling Cycle zero pollution car runs on stored heat |
|
Scott, David | 1974 | Popular Science, June 74 |
|
|
66-68 |
|
|
|
| Night and Day |
|
Scott, David | 1990 | Popular Science February 1990 |
|
|
|
|
|
|
| Nitrogen oxide in Stirling Engine Exhaust gas |
|
|
1971 | IECEC conference Proceedings | SAE#719134 |
|
|
|
|
|
| Nodal Analysis of Miniature Cryogenic Coolers |
|
Ho, R.C.C.,Howson, M.E. | 1980 | IECEC 15th Proceedings | SAE#809452 |
|
|
|
|
|
| Nodal Analysis of Stirling Cycle Devices |
|
Schock, A. | 1978 | IECEC 13th Conf. Proc. San Diego, CA | SAE#789191 |
|
1771-1779 |
|
|
|
| Noise emission of Stirling Engines and overall vehicle noise |
|
Ortegren, L.G. | 1973 | Conf. on Low Pollution Power Systems Development |
|
|
|
Conf. held in Ann Arbor, MI Oct 14-19 |
|
|
| Noise studies of Stirling Cycle Engines |
|
Schab, H.A. | 1964 | U.S. Navy Marine Engineering Laboratory | Report #152/64 Sept |
|
|
|
|
|
| Non-Ending Helium Story, The |
|
Hammel, E.F.,Krupka. M.C. | 1986 |
|
LA-UR-1363 1986 |
|
|
|
|
|
| Non-Ideal regenerator performance--the effect of void volume | fluid heat | Daney, D.E. | 1984 | Cryogenics, v24 Sept 84 |
|
|
499-501 |
|
|
|
| Nonlinear Analysis of Free Piston Stirling Engine |
|
Ulusoy, Necati; McCaughan, Francis | 1993 | IECEC 28th Conf. Proceedings | SAE#93507 |
|
2.739 | Mech. and Aerospace Engineering Case Western | reserve university, Cleveland OH |
|
| Nonlinear Analysis of Stirling Engine Thermodynamics |
|
Banduric, R.D.; Chen, N.C.J. | 1984 | Oak Ridge National Laboratories f/DOE | NTIS#DE84013493 | ORNLCON154 | 76p |
|
|
|
| Non-Linear Simulation Model for Free-Piston Stirling Engines | Dynamic Analysis | Carlini, M.;Kucharski,T. | 1986 | Proc. 3d Int Stirling Eng. Conf. vol 1(Rome) | ISEC 86-III-63 |
|
199-207 |
|
|
|
| Non-nuclear powerplants for AUVs |
|
Reader, G.T.;Walker, G.;Hawley,J. | 1989 | Proc 6th Conf. on Unmanned Untethered Submersibles | IEEE 89CH2782-1 |
|
|
|
|
|
| Notes, UCLA Stirling Engine course notes |
|
Beale, William T. | 1978 | Sunpower Inc, Athens, Ohio |
|
|
|
A collection of lecture notes by Dr. William Beale | while lecturing on Stirling Engines |
|
| Novel Refrigerating machine, A |
|
Yendall, E.F. | 1958 | Adv. Cryogenic Engineering, Vol 2 |
|
|
188-196 |
|
|
|
| NOx content in the exhaust gases of a Stirling Engine, The |
|
Michels, A.P.J. | 1971 | IECEC Conference Boston Aug 3-5, 1971 | SAE#719134 |
|
1010-23 |
|
|
|
| NOx Reduction Approaches for Stirling Engine Combustors |
|
Eguchi, K. | 1988 | 4th Int. Stirling Engine Conference Nov 88 | Paper No. 52 |
|
|
|
|
|
| Nuclear Artifical Heart Bench Model |
|
|
1974 | IECEC | SAE#749116 |
|
|
|
|
|
| Nuclear Artificial Heart bench model |
|
Pouchet, W.D.; Daniels,A. | 1975 | IECEC 9th Conf. Proc., San Francisco, CA Aug 26-30 |
|
|
782-790 |
|
|
|
| Nuclear closed cycle gaseous Heat Engine concept |
|
Ross, B.A., Drost, M.K. | 1989 | IECEC 24th Conf. Proc. | SAE#899546 |
|
|
Battelle Northwest Laboratory | Richland, WA 99352 |
|
| Nuclear fueled circulatory support systems |
|
Norman, J.C.;Harmison, L.T. | 1972 | Arch. Surgery Vol 105 October |
|
|
|
|
|
|
| Nuclear Heat Source for Cryogenic Refrigerators in space |
|
Raab, B.;Schock, A.;King, W.G. | 1975 | IECEC 10th conf. Proc. Newark, NJ Aug 17-22 |
|
|
|
|
|
|
| Nuclear Powered Artificial Heart System |
|
Postma, N.P.;Lehrfeld D. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept 12-17 |
|
|
157-162 |
|
|
|
| Nuclear powered work sub will be an industry sub | Article(description of SAGA project) |
|
1984 | Ocean Industry, December |
|
|
pg. 13 | 1 page story on SAGA1 |
|
|
| Nuclear Stirling Engine, The |
|
van Nederveen. H.B. | 1966 | Proc. First Int. Conf. on the use of radioisotopes | Paper No. 35, Harwell |
|
|
|
|
|
| Numerical Advection erros in Stirling Cycle Nodal Analysis |
|
Gedeon, David R. | 1984 | IECEC 19th Conf. Proc. Vol 3.\Gedeon Assoc | SAE#849101 |
|
|
|
|
|
| Numerical Analysis of Stirling Engine |
|
Sekiya, H.;Terada, F. | 1990 | Trans Jpn Soc. Mech Eng. Vol 56 No. 527(1st rpt) |
|
|
|
|
|
|
| Numerical Analysis of Stirling Engine |
|
sekiya, H.;Katouno R. | 1991 | Trans Jpn Soc Mech Engrs, Vol 57 No 535 |
|
|
|
in Japanese |
|
|
| Numerical Analysis of Stirling Engine |
|
Sekya,H.; Matsue, J. | 1991 | Trans, Jpn Soc. Mech Engrs, Vol 57, No 539 |
|
|
|
in Japanese |
|
|
| Numerical Model for Stirling Cycle Machines |
|
Berchowitz,D.M.;Urieli,I;Rallis,C.J. | 1979 | Israel Joint Gas Turbine Congress, July 1979 |
|
|
|
|
|
|
| Numerical Modeling of Dish Stirling Reflux Solar Receivers |
|
Hogan, R.E. | 1990 | Sandia Laboratories f/DOE | NTIS#DE910034510 | SAND891628C | 31 |
|
|
|
| Ny Svensk Stirlingmotor Premiakord i Malmo |
|
Viklund, G.D. | 1972 | Ny Teknik, Vol 5 No.1 |
|
|
|
|
|
|
| Old Hot Air Engine |
|
|
1949 | Engineer, Vol 187 No. 4862, April 1, 1949 |
|
|
365-6 | Coal fired air engine driven pumping set used for | 50 years at Bodorgan Station, Anglesey for pumping | water to locomotive tank.(short note) |
| On a new method for design of Stirling Engine piston rings |
|
|
1981 |
|
SAE#819790 |
|
|
|
|
|
| On dynamic response of pressure transmission lines in the | research of helium charged Free-Piston Stirling Engines | Miller, Eric; Dudenhoefer, James E. | 1989 | NASA | TM-102121 |
|
|
|
|
|
| On Marine Stirling Engine development in Japan |
|
Isshiki, Naotsugu; Tsukahara, Shigeji | 1982 |
|
SAE#829288 check number |
|
|
Tokyo Inst. of Technology, Meguro, Tokyo and Ship | Research Institute, Mitaka, Tokyo |
|
| On Site Heat Activated Heat Pump |
|
Colosimo, D.D. | 1976 | Tech. Opportunities for Energy Conservation... |
|
|
|
Technical Opportunities for Energy Conservation in | Applicances, Conference, Boston, MA May 11 |
|
| On the Air Engine |
|
Joule, J.P. | 1852 | Philosophical Transactions, Vol 142, 1852 |
|
|
|
|
|
|
| On the Dynamic response of Pressure Transmission Lines in | the Research of Helium charged Free Piston Stirling Engines | Miller, Eric; Dudenhoefer, J.E. | 1989 | NASA Lewis Research Center | SAE#899538 |
|
|
|
|
|
| On the means of realizing the advantages of Air Engines |
|
Rankine, M. | 1854 | British Association, Proc. of Annual Meeting |
|
|
|
|
|
|
| On the role of External Combustion Engines for on-site power | generation | Holts, Robert E.;Uherka, Kenneth L. | 1979 | 3rd Conf. on Tech. and Energy Conservation, Tucson | Jan 1979 |
|
|
|
|
|
| On the Self Regulation of Free Piston Stirling Engines: | Comparison of Theoretical and Experimental Results | Benvenuto, G.; de Monte, F. | 1993 | IECEC 28th Conf. Proceedings | SAE#93334 |
|
2.731 | Benvenuto-University of Genoa, Depart Navel Eng. | de Monte-University of L'Aguila, Aquila, Italy |
|
| On the use of heated air as a motive power |
|
Cheverton, Denjamin | 1873 | Proc. of Instution of Civil Engineers May 1873 |
|
|
|
|
|
|
| On Wenham's Heated Air Engine |
|
Cooke, Conrad W. | 1873 | Inst of Mechanical Engineers, yearbook 1873 |
|
|
63-75 | from U.C. Berkeley, Bechtel Engineering Library | discusses Stirling's 1843 engine, Ericsson's 1853 | engine and Wenhams Hot Air Engines |
| Operating characteristics of a small Stirling Engine |
|
Walker, G.; Ward, G.L.; Slowly, J. | 1979 | IECEC 14th Conf. Proc. | SAE#799249 |
|
1152-1156 | 1978 Proc. Can. Soc. Mech. Eng. |
|
|
| Operation of a Jet-Stream Feedback Fluidyne |
|
Lewis, P.D. | 1978 | Royal Naval Engineering College | RNEC-TR-78008, May |
|
|
|
|
|
| Operation of a practical SQUID gradiometer in a low power | Stirling cryocooler | Zimmerman, J.E. | 1980 | GPO | NBS Spec. Pub. 607 |
|
|
|
|
|
| Operation of a SQUID in a very low power cryocooler |
|
Zimmerman, J.E. | 1977 | GPO | NBS Pub 508 |
|
|
Proc. applications of closed cycle cryocoolers to | small superconducting devices |
|
| Operation of the Fluidyne Heat Engine at Low Differential | Temperatures, The | Stammers, C.W. | 1979 | Journal of Sound and Vibration v63(4) |
|
|
507-516 |
|
|
|
| Operational Characteristics of Free-Piston Stirling engines |
|
Berchowitz, David M. | 1988 | IECEC 23rd Conf. Proc./Sunpower Inc, Athens, Ohio | SAE#889279 |
|
107-112 |
|
|
|
| Operational Maintentance Data Base Development for Kinematic | Stirling Engines | Richey, Albert.;Smith, G. | 1985 | ASME | ASME#85-DGP-20 |
|
|
paper presented at Energy sources and Technology | Conference, dallas, TX |
|
| Operations Cycle of Stirling Engine with particular | reference to function of Regenerator | Walker, Graham | 1961 | Journal Mechanical Eng. Science v3, n4 Dec. 1961 |
|
|
394-408 | Engine used was a gas refrigerating machine | operating on reversed Stirling cycle. 24 ref. |
|
| Optimal Heat Exchanger Design of the MAC-02 Stirling Engine |
|
Abenavoli, I.;Carlini, R.;Kormanski,H. | 1993 | 6th Int. Stirling Engine Conf, Eindhoven |
|
|
|
|
|
|
| Optimization of Heat Exchanger System of a 3 KW Prototype | Stirling Engine for a Gas Fired Residential Heat Pump | Sakamoto, M.; Nagatomo, S.;Komakine, T. | 1986 | Proc. 3d Intl. Stirling Engine Conf. vol 1(Rome) | ISEC 86-v-5 |
|
353-367 |
|
|
|
| Optimization of phase angle and volume ratio for Stirling | Engines | Finkelstein, Theodore | 1961 | SAE Annual Meeting Detroit January 1961 | #118C |
|
|
|
|
|
| Optimization of Principle design parameters of Stirling | Cycle Machines | Walker, Graham | 1962 | Journal of Mechanical Eng. Science, vol 4,n3 Sept |
|
|
226-40 | Performance is a function of speed, pressure of | working fluid, ratio of temperatures and of swept | volume in compression space, volume of heat |
| Optimization of Stirling Cycle Machines., The |
|
Gedeon, D.R. | 1978 | IECEC 13th Conf. Proc | SAE#789194 check number |
|
|
|
|
|
| Optimization of Stirling Engines |
|
Walker, Graham | 1974 | The Big Byte, Vol 7, N1 Univ. of Calgary |
|
|
1-8 |
|
|
|
| Optimization of the specific performance of Stirling Engines |
|
Takase, C.N. | 1972 | M.Sc. Thesis Inst. Tech de Aero-Nautica |
|
|
|
Instituto de Aero-Nautica, San Jose dos Campos, |
|
|
| Optimization of the Swept Volume Ration for Regenerative | Cycles | Thomas, B.; Kuhl, H.D.; shulz,S. | 1989 | IECEC 24th Proceedings | SAE#899377 |
|
2193 |
|
|
|
| Optimized sizing of Stirling Cycle Machines based on a | comprehensive second order analysis | Urielli, I.;Berchowitz, D.M. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Optimum compression ratios of Stirling Cycle Machines |
|
Rallis, C.J.;Urieli, I. | 1976 | Univ. of Whitwatersrand, Johannesburg, S. Africa | Research Report No. 68 |
|
|
|
|
|
| Optimum design configuration for Stirling Engines with two | phase two component working fluids | Walker, Graham; Agbi, B. | 1973 | ASME Paper Winter Meeting, Ann Arbor, MI | Paper No. 73-WA/DGP-1 |
|
|
|
|
|
| Optimum operation of a solar converter in combination with | a Stirling or Ericsson heat engine | Badescu, V. | 1992 | Energy(Oxford England)v17, June 92 |
|
|
601-607 | contains bibliography |
|
|
| Orbital Cryogenic Cooling systems |
|
Nast, T.C.;Murray, D.O. | 1976 | AIAA Paper | #76-979(1976) |
|
|
|
|
|
| O-Ring fitting seal Stirling Engine test |
|
|
1984 | Hydraulics and Pneumatics, V37, Nov 84 |
|
|
24 |
|
|
|
| Oscillating flow in Stirling Engine Heat Exchangers |
|
Seume, J.R.; Simon, T.W. | 1986 | IECEC 21st Conf. Proc./AmChemsoc. | SAE#869118 |
|
533-538 |
|
|
|
| Overheat Protection in solar-Powered Stirling Engines: Power | output would be regulated according to solar energy input |
|
1983 | NTIS Technical Note | NTIS#NTN830053 |
|
1p |
|
|
|
| Overview of a Stirling Engine Test Project |
|
|
1980 | NASA | DOE/NASA/1040-80/12 |
|
|
|
|
|
| Overview of Cryocooler Technologies for Space based | Electronic and Sensors | Chan, C.K.;Tward,E.;Burt,W.W. | 1976 | Advances in Cryogenic Engineering Vol. 35 1990 |
|
|
|
|
|
|
| Overview of DOE's Large Stationary Stirling Engine | Development Program | Uherka, Kenneth; Holtz, Robert E. | 1981 | Argonne National Laboratory f/DOE | NTIS#DE83009616 | CONF81081258 | 7p | given at IECEC Conf Atlanta 9 Aug 1981 | IECEC Record p 1847-1853 |
|
| Overview of DOE's Large Stationary Stirling Engine Develop- | ment Program | Uherka, K.L., Holtz, R.E. | 1981 | IECEC 16th Conf. Proceedings, Vol 2 ASME NY | SAE#819780 |
|
pp. 1847-1853 |
|
|
|
| Overview of Free-Piston Engine Technology for Space Power | Applications |
|
1987 |
|
NTIS#DE87002961 |
|
|
739,073 |
|
|
| Overview of Free-Piston Stirling Engine Technology for Spac | Power Application. Final report | Slaby, J.G. | 1987 | NASA Lewis Research Center | NTIS#N88124276 | NASATM-88886 | 23p |
|
|
|
| Overview of Free-Piston Stirling tech. for Space Power | at the NASA Lewis Research Center 1988 | Slaby, Jack G. | 1988 | NASA Lewis Research Center | NTIS#N88229349 | NASATM-100795 | 11p |
|
|
|
| Overview of Free-Piston Stirling Technology at the NASA | Lewis Research Center | Slaby, Jack G. | 1985 | NASA Lewis Research Center | NASA/DOE/1005-7 | NASATM-87156 |
|
DOE/NASA/1005-7 Oct 85 |
|
|
| Overview of heat transfer and Fluid Flow Problem Areas En- | countered in Stirling Engine Modeling | Tew, Roy C. | 1988 | NASA Lewis Research Center | NTIS#N88175617 | NASATM-100131 | 23p feb 88 |
|
|
|
| Overview of NASA Lewis Research Center Free-Piston Stirling | Engine Activities | Slaby, Jack G. | 1984 | IECEC Conf/NASA Lewis Research Center f/DOE | NTIS#DE84010761 | NASATM-83649 | 20p | IECEC Conf San Francisco Aug 84 |
|
|
| Overview of NASA Lewis Research Center Free-Piston Stirling | Engine Technology Activities Applic. to Space Power Systems |
|
1986 |
|
NTIS#DE86014816 |
|
|
729,806 |
|
|
| Overview of NASA Support Stirling Thermodynamic Loss | Research | Tew, Roy; Geng, steven | 1992 | IECEC 27th Proceedings\NASA Lewis Res. Center | SAE#929462 |
|
5.489-5.494 |
|
|
|
| Overview of the 1985 NASA Lewis Research Center SP-100 Free | Piston Stirling Engine activities | Slaby, Jack G. | 1985 | NASA Lewis research Center | SAE#859022 | NASATM-87028 |
|
Summary of 1985 NASA Lewis projects |
|
|
| Overview of the 1986 Free-Piston Stirling Activities at NASA | Lewis Research Center |
|
1987 |
|
NTIS#N8714209/7 | N87-16663/3 |
|
711,888 |
|
|
| Overview of the 1986 Free-Piston Stirling SP-100 activities | at the NASA Lewis Research Center |
|
1986 |
|
SAE#869098 |
|
|
N86-26261/5 643311 |
|
|
| Overview of the NASA Lewis Component Technology Program | for Stirling Power Converters | Thieme, Lanny; Swec,Diane | 1992 | IECEC 27th Proceedings\NASA Lewis Res. Center | SAE#929260 |
|
5.283-5.288 |
|
|
|
| Overview of the Stirling Engine Heat Pump Program |
|
Chen, F.C. | 1988 | Oak Ridge Nationl Laboratory f/DOE | NTIS#DE88013833 | CONF880410021 | 11p |
|
|
|
| Overview of Waste heat Utilization systems |
|
|
|
|
N85-13692/7 | 514922 |
|
|
|
|
| Overview: DOE/NASA Automotive Gas Turbine and Stirling | Projects |
|
1981 |
|
NTIS#N81-25487/2 | DE81023796 |
|
|
|
|
| Paper |
|
Rallis, E.J. | 1977 | IECEC Record | SAE#779244 |
|
|
|
|
|
| Paper |
|
Clark M.A. | 1978 | University of Bath | M. Sc. Thesis |
|
|
|
|
|
| Paper |
|
Lewis P.D.; Reader G.T. | 1979 | IECEC Record | SAE#799238 |
|
|
|
|
|
| Paper |
|
Zacharias, F. | 1971 | Proc 9th Int. Congress on Combustion | CIMAC paper #A26 |
|
|
|
|
|
| Paper |
|
Van Edkelen, J. A. M. | 1979 | IECEC Record |
|
|
pp. 1186-1190 |
|
|
|
| Paper |
|
Nogle, T.D. | 1977 | 4th Int Symp. of Automotive Propulsion systems. | Washington, DC |
|
|
|
|
|
| Paper |
|
Angell, P.; Golec, T. | 1976 | Society of Automotive Engineers | SAE#760280 |
|
|
|
|
|
| Paper |
|
Stephenson, R.R. | 1975 | SAE special publication | SP399,SP400 |
|
|
|
|
|
| Paper |
|
Zacharias, F. | 1974 | NATO | NATO-CCMS 2nd Symposium |
|
|
|
|
|
| Paper |
|
Billett, A. | 1982 | Inst. of Mechanical Engineers, London | Stirling Engine Conference |
|
|
|
|
|
| Paper |
|
Grinnel, S.K. | 1956 | ASME Transactions | #55-SA-13 |
|
|
|
|
|
| Paper |
|
Meijer, R.J. | 1979 | IECEC 14th Conf. Proc. | SAE#799258 |
|
|
|
|
|
| Paper |
|
Lavoie, G.A. | 1970 | Combustion Science Technology |
|
|
pg. 313 |
|
|
|
| Paper |
|
Benson, R.S. | 1975 | International Journal of Mechanical Science |
|
|
pg. 97-124 |
|
|
|
| Paper |
|
Ishizaki, Y. | 1979 | IECEC Record | N79CH1477-9, IEEE Cat. No. |
|
|
|
|
|
| Paper |
|
Uherka, K.L. | 1979 | IECEC Record |
|
|
pp. 1124-1130 |
|
|
|
| Paper | Proc Int. Symp on the Stirling Engine and its appliction | Sakamoto, | 1986 | Heat Pump Tech Center of Japan | paper no. 5, |
|
pp 83-117 |
|
|
|
| Paper |
|
Endo, N. | 1988 | Int. Conf. on the Stirling Engine | paper no. 66 Nov 88 |
|
|
|
|
|
| Paper |
|
Kagawa, N. | 1988 | 4th Int Conf. on Stirling Engine | Paper no. 1 Nov 88 |
|
pp 106 |
|
|
|
| Paper |
|
Kagawa, N. | 1989 | IECEC 24th Conf. Proc. Vol 5 | SAE#899157 |
|
pp 2369-2374 |
|
|
|
| Paper |
|
Kagawa, N. | 1986 | IECEC 21st Conf. Proc. | Vol 3, Aug 1986 |
|
pp 478-483 |
|
|
|
| Parabolic Dish Solar Thermal Power Annual Program Review |
|
|
1982 | Jet Propulsion Laboratory, Pasadena CA f/DOE | NTIS#DE83000474 | JPLPUBL8266 | 350p |
|
|
|
| Parametric Testing and Evaluation of a Free-Piston Stirling | Linear/Compressor system | Chiu, W.;Hogan, J. | 1983 | IECEC 18th Conf. Proc./Oak Ridge Nat. Lab f/DOE | SAE#839143 NTIS#DE83017282 | CONF83081253 | 34p |
|
|
|
| Parametric Thermal Analysis of the Stirling Engine Metallic | Regenerator | Bartolini, Carlo | 1984 | Univ degli Studi di Ancona | SAE#849274 |
|
|
|
|
|
| Parbolic Dish Stirling Module Development and Test Results |
|
Washom, B. | 1984 | IECEC 19th Conf. Proceeding, Am. Nuc. Soc | SAE#849516 |
|
pp. 1686 | August 1984 |
|
|
| Passive Solar Water Pump |
|
Bell, G.C. | 1979 | University of New Mexico | Independent Project Arch. 589 |
|
|
|
|
|
| Performance analysis and improvement of a 3kw Stirling | Engine |
|
1986 |
|
SAE#869109 |
|
|
|
|
|
| Performance Analysis and Improvement of a 3kW Stirling | Engine | Kagawa, N.; Nagatomo,S.; Sakamoto, M. | 1986 | IECEC 21st Conf. Proc. |
|
|
478-83 | ACS |
|
|
| Performance analysis of a variable stroke reciprocating | Engine | Abenavoli, R.I.;Sciaboni, A. | 1991 | IECEC 26th Conf. Proc. /Univ. of Rome/Warsaw Univ |
|
|
304-307 |
|
|
|
| Performance and part load testing of a Philips Air Cycle | Engine project Report | Ford, D.R.;Green,C.F. | 1968 | Univ. of Bath, UK | Report No. 125 |
|
|
|
|
|
| Performance characteristics of a back to back Free Displacer | Disciplined Piston Stirling Engine |
|
1987 |
|
SAE#879101 |
|
|
|
|
|
| Performance characteristics of the Stirling Engine |
|
Ward, G.L. | 1972 | Univ. of Bath, UK |
|
|
|
|
|
|
| Performance charcteristics of Wet and Dry Fluidynes |
|
|
1982 |
|
SAE#829291 check number |
|
|
|
|
|
| Performance factors of a periodic flow heat exchanger |
|
Lambertson, T.J. | 1958 | Trans. ASME Vol 80 |
|
|
586-592 |
|
|
|
| Performance loss due to Transient Heat Transfer in the | Cylinder of Stirling Engines | Lee, K.P.; Smith, J.L. | 1980 | IECEC 15th Conf. Proceedings Seattle WA Aug. 1980 | SAE#809338 |
|
|
|
|
|
| Performance Mapping of the STM4-120 Kinematic Stirling | Engine using a Statisical design of Experiments Method | Powell, Mark A.; Rawlinson, K. Scott | 1993 | IECEC Proceedings Vol 2 | SAE#93282 |
|
2.639 | work done under contract DE-AC04-76DP00789 |
|
|
| Performance measurement and energy balance of SPS V160 | Stirling Motor at the German Aerospace Research Establishmen | Noyes, G. | 1990 | Deutsche Forschungs-und Versuchsarstalt fuer Luft | und Raumfahrt e.V. Cologne, Germany, FR | DLRmitt9003 | 27 |
|
|
|
| Performance Measurements for a Diaphram coupled Free-Piston | Stirling Engine heat Pump Module | Ackermann R.A.;Privon, G.T. | 1988 | IECEC |
|
|
|
|
|
|
| Performance of a 3kw prototype Stirling Engine for | a gas fired residential heat pump |
|
1985 |
|
SAE#859142 |
|
|
|
|
|
| Performance of a Free-Piston Stirling Engine coupled with a | Free-Piston linear compressor | Marusak, T.J. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Performance of a Free-Piston Stirling Engine for a Heat | Pump |
|
1979 |
|
SAE#799253 |
|
|
|
|
|
| Performance of a laboratory 10 Watt Stirling Generating Set |
|
Ross, Brad A.; Ritter, D.C. | 1993 | Proc. of 6th Int. Stirling Engine Conf. Rotterdam | Paper No. 059 |
|
|
|
|
|
| Performance of a modified Stirling Engine with exhaust gas | recuperator | Conlin, D.M.; Reed, L.H. | 1973 | Univ. of Bath UK, Sch. of Engineering Proj. Report |
|
|
|
|
|
|
| Performance of a Stirling Engine powered heat activated | Heat Pump | Richards, W.D.;Auxcer, W.L. | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug 20-25 | SAE#789453 |
|
|
|
|
|
| Performance of a Stirling Engine Regenerator having infinite | mass | Jones, J.D. | 1986 | Jnl of Engr for gas Turbines and Power V108 Oct 86 |
|
|
669-673 |
|
|
|
| Performance of model 4-S1210 Stirling Cycle Engine | Assignment 71-101 | Loftus, G.H. | 1964 | US Navy Marine Engineering Lab Evaluation | Report No. 10 |
|
|
|
|
|
| Performance of the CPG 7.5 kWe Dish Stirling System |
|
Bean, J.R.;Diver, R.B. | 1993 | IECEC Proceedings 28th Conf. | SAE#93054 |
|
2.627 | Cummins Power Generation/Sandia National Labs. |
|
|
| Performance of the Southern California Edison Co. Stirling | Dish | Lopez, C.W.;Stone,K.W. | 1989 | Stirling Dish Workshop |
|
|
|
|
|
|
| Performance of the Vanguard Solar Dish-Stirling Engine Modul |
|
Droher, J.J., Squier, S.E. | 1986 | Energy Technology Engineering Ctr, Canoga Park CA | EPRI AP-4608 (July 1986) Project 2003-5 |
|
|
Electrical Power Research Inst. |
|
|
| Performance Sensitivity of the P-40 Stirling Engine |
|
Kelm, G.G.,Cairelli, J.E. | 1981 | Proc of the Auto. Tech. Devel. Contract. | Coordination Meeting, Dearborn, MI Oct 1981 |
|
|
|
|
|
| Periodic flow Regenerator-a summary of design theory, A |
|
Coppage, J.E.; London, A.L. | 1953 | Trans of Am. Soc. Mech. Engineers, Vol 75 |
|
|
779-787 |
|
|
|
| Perspectief van de Stirlingmotor voor voertuig-aandrijving | (Persective of the Stirling Engine for vehicles) in Dutch | Achten, P.A.J. | 1988 | Nov 88 | NTIS#DE90706022 |
|
54 |
|
|
|
| Perturbation analysis of the Stirling Cycle |
|
|
1982 | IECEC 17th Proceedings, | SAE#829281 check number |
|
|
|
|
|
| Perturbation solutions for the periodic flow thermal | regenerator | Jones, L.L.;Fax, D.H. | 1954 | ASME Paper | No. 54-A-130 |
|
|
|
|
|
| Phase 1 Results from the Stirling-Powered Vehicle Project |
|
Shaltens, R.K. | 1988 | NASA Lewis Research Center | NTIS#N88279807 | NASATM-100978 | 17p 1988 | 4th International Stirling Engine Conference in | Tokyo, Japan, |
|
| Phase 1-A Development Kinematic Stirling/Rankine commercial | Gas-Fired Heat Pump Research program. Ann. Report Aug 82-83 | Johansson, L.; Agno, J.G. | 1984 | Stirling Power Systems Corp Ann Arbor f/GRI | NTIS#PB85100931 | GRI840080 | 71p | Jul 84 | for Gas Research Inst. chicago |
|
| Phases 1-C,1-D and 1-E development of Kinematic Stirling/ | Rankine Commercial gas Fired Heat Pump System. FR Sept 88 | Monahan, R.E. | 1988 | Stirling Power Systems f/Gas Research Institute | NTIS#PB89126239 | GRI50862421214 | 101p Oct 88 |
|
|
|
| Phases I-C,I-D and I-E development of Kinematic Stirling/ | Rankine gas fired Heat Pump. Final Report Jan 86-Sept 88 | Monahan, R.E. | 1988 | Stirling Power Systems Corp f/Gas Research Inst | NTIS#PB9126239 | GRI880237 | 101p Oct 88 |
|
|
|
| Philips 4-235 Heavy Duty Stirling Engine |
|
de Wilde de Ligny, J.H. | 1971 | IECEC 6th Conf. Boston, MA |
|
|
|
paper not included in Proceedings |
|
|
| Philips Stirling Engine |
|
Van Weenan, F. L., et al | 1947 | Philips Technical Review, V9 |
|
|
97-104 125-134 |
|
|
|
| Philips Air Engine, The |
|
Finklestein, T. | 1947 | Engineer, v184,n4794,4795 Dec 12, 1947,Dec 19,47 |
|
|
549-50,572-74 | Also in Machy(London) v72,n1860,June 17,1948 | description of prototype single cylinder vertical | engine by N.V. Phillips Gloeilampenfabrieken |
| Philips Gas Refrigerating Machine for 20 degrees K and | lower | Prast, G. | 1963 | Cryogenics, Vol 3 |
|
|
156-160 |
|
|
|
| Philips Gas Refrigerating Machine for the Liquefaction of | Air, |
|
0 | Philips Technical Review |
|
|
|
|
|
|
| Philips Hot Gas Engine with Rhombic Drive Mechanism, The |
|
Meijer, R. J. | 1959 | Philips Technical Review Vol 20,No 9 May 59 |
|
|
pp. 245-262 | Supplements first stories in 1946 and 1947 | discusses research along both hot and cold lines | of research. |
| Philips Stirling Engine Activities |
|
Meijer, R. J. | 1966 | SAE Transactions\Philips Research Laboratories | SAE#650004 | Paper #949E | Vol 74 | Summary of Stirling Engine work at Phillips thru | 1965. Photographs and drawings. discusses early | development(Given at meeting Jan 11-15 1965) |
| Philips Stirling Engine activities |
|
Meijer, R. J. | 1965 | Int. Auto Eng. Congress, Detroit, MI | SAE#949E |
|
|
|
|
|
| Philips Stirling Engine as a propulsion engine |
|
Meijer, R. J. | 1970 | IECEC 5th Conf. Proc. Las Vegas, NV | SAE#709196 |
|
|
|
|
|
| Philips Stirling Engine, The |
|
Meijer, Roelf.J. | 1969 | De Ingenieur Vol 8 Nos. 18,19 May 2, 1969 |
|
|
69-79 | Description of engine formerly known as Hot Air | Engine, the cycle explained and work being done |
|
| Philips Stirling Engine, The |
|
Hargreaves, C. M. | 1991 | Elsevier Science Publishing Co.,NY |
|
|
|
|
|
|
| Philips Stirling Engine: A Progress Report., The |
|
Spigt, C.L. | 1975 | IECEC 10th Conf. Proc. Newark, NJ | SAE#759138 |
|
919-926 |
|
|
|
| Philips Stirling Motor-Varmgasmotor med Utveckling- | smojligheter | Meijer, R.J. | 1969 | Teknisk Tidskrift, Vol 99 |
|
|
373-378 |
|
|
|
| Philips Stirling Thermal Engine, The |
|
Meijer, R.J. | 1960 | Technische Hogeschool Delft | Thesis |
|
|
Philips Research reports supplements 1961, No. 1 | Technical Univ. of Delft, |
|
| Philips Thermal Engine. Philips Research Reports | Supplements |
|
1961 | Philips Research Laboratories, Eindhoven | No. 1 |
|
|
|
|
|
| Phoelix, a 6 cc Stirling Engine |
|
Collins, M.F. | 1979 | Model Engineer Vol 145, No. 3614 Aug 3 |
|
|
882-886 | Describes Rulon seals |
|
|
| Pistonless Stirling Engine, A., The Traveling Heat Wave | Engine | Ceperley, P.H. | 1979 | Journal of Acoustics Society, Vol 66 |
|
|
1508-1513 |
|
|
|
| Plan of a Stirling Engine utilizing incinerator heat, A |
|
Isshiki, N. ;Kenji, H.;Kazuhiko,G. | 1988 | IECEC 23rd Conf Proc./Nihon Univ. Koriyama, Japan | SAE#889347 |
|
141-146 |
|
|
|
| Plans laid for development of Stirling Engine |
|
|
1977 | Design Nov 77 |
|
|
|
|
|
|
| Plunging Cylinder Liquid Piston Stirling Engine |
|
Tailer, Peter; West J. | 1987 | IECEC 22nd Conf. Proc. | SAE#879425 |
|
|
|
|
|
| Pollution control in continuous combustion engines |
|
Lefebvre, A.H. | 1974 | Proc. 15th Int. Symp. on Combustion, Aug |
|
|
1169-1180 |
|
|
|
| Polytechnic Symposium on Thermodynamics and Heat Transfer |
|
Reader, G.T. | 1979 | Leicester, UK | paper 19 |
|
|
|
|
|
| Pool Boiler Receiver for Dish Electric Systems |
|
Andraka, D.E.;Moreno, J.B. | 1989 | IECEC 24th Conf. Proceedings | SAE#899462 |
|
|
|
|
|
| Pool Boiler Thermal Modeling |
|
Saaski, | 1989 | Solar Heat Transport System Workshop,Lancaster PA | Sept 27-29, 1989 |
|
|
|
|
|
| Pool Boiler Transport System for a 25 kW Advanced | Stirling Conversion System | Anderson, W. Rosenfeld, J.H. | 1990 | IECEC 25th Proc. Aug 12-17 1990 Reno NV | SAE#900163 ASCE |
|
268-273 |
|
|
|
| Portable Power from a Stirling Cycle Engine |
|
Free, John | 1982 | Popular Science Jan 82 v220 |
|
|
40 | Describes a Stirling genset in a recreational | vehicle as its primary electrical power source |
|
| Positive Rod or Piston seal for Large Pressure Difference, A |
|
Rietdijk, J.A. | 1965 | Philips Technical Review | Vol. 26, No. 10 1965 |
|
287-296 |
|
|
|
| Positive Seal for Pistons and Axially moving Rods, A |
|
Rietdijk, J.A. | 1964 | The Engineer | Aug 28 |
|
pp. 346-347 |
|
|
|
| Positive Seal For Pistons and Moving Rods |
|
Reitdijk, J. A. | 1962 | Philips Technical Review, V24 |
|
|
pg. 405 |
|
|
|
| Potential Applications of the Stirling Engine for Space | Power |
|
1963 | Allison Div. of General Motors, March 63 | ASD-TRD-62-1099 |
|
|
|
|
|
| Potential Impact of the Stirling Engine on environmental | issues. | Carlqvist, Stig G.;Ortegren,L.G.H. | 1974 | Inst. of Road Transport Engines, jan 17 |
|
|
|
|
|
|
| Potential Impacts of Brayton and Stirling Cycle Engines |
|
|
1981 |
|
NTIS#N81-23603/6 | DOE/CS/51011-T1 |
|
|
|
|
| Potential of the Philips Stirling Engine for Pollution | Reduction and Energy Conservation | Meijer, Roelf J.; Spigt, C.L. | 1974 | 2nd Symp. on Low Pollution Power Sys Development |
|
|
12p | Presentation held in Dusseldorf, Germany, Nov 74 |
|
|
| Potential of the Stirling Cycle Heat Pump., The |
|
Rix, D.H. | 1989 | Proc. of the Inst of Mechanical Engineers Part A | Journal of Power Engineering v203 noA4 |
|
245-254 |
|
|
|
| Potential of the Stirling Engine for stationary power | applications in the 500-1000 HP range | Hoagland,L.C.;Percival,W.H. | 1978 | IECEC 13th Conf. Proceedings, San Diego, CA |
|
|
|
|
|
|
| Potential passenger car power plants |
|
Wintringham, J.S. | 1960 | SAE Paper | SAE#S275 |
|
|
|
|
|
| Potential Performance of an Engine Driven Stirling Heat Pump |
|
Wurm, J.; Staats | 1977 | Hittman Assoc, Columbia MD f/DOE | NTIS#DE81023969 | DOECS70001T1 | 28p | Feb 77 |
|
|
| Power for remote areas |
|
Tabor, H.Z. | 1967 | International Science and Technolgy, May |
|
|
52-59 |
|
|
|
| Power from Thermal Energy Storage Systems |
|
Flynn, G.;Percival, W.H.;Tsou, M.T. | 1962 | Combined Nat. Fuels and L ubricants Powerplant Mtg | SAE Paper #608B |
|
|
from the Combined National Fuels and Lubricants, | Powerplant and Transportation Mtg, Phila, PA |
|
| Power Guide.,The |
|
|
1979 | Charles Scribner & Sons, NY | ISBN 0-684-16739-5 | LCN 80-52102 |
|
Under Stirling Engines, 1/2 page on Harwell TMG | AGA Navigation Aids, 77 High St. Brentford, | Middlesex, UK, description of the power device |
| Power Home System with Stirling Engine for Residential | Applications | Gonnov, Igor V.;Loktionov, Yury V. | 1993 | IECEC 28th Conf. Proceedings | SAE#93022 |
|
2.681 | Science and Technology Center, ENERGO, 21 | Kurchatov St, Obninsk Kaluga Region, Russia |
|
| Power production with assemblies of small solar engines |
|
Daniels, F. | 1971 | ASME Nov 28-Dec 2 | ASME#71-WA-/SOL-5 |
|
|
|
|
|
| Power sources for remote ocean oriented applications |
|
McCartney, J.F.; Cates, M.A. | 1975 | IECEC 10th Conf. Proc. Newark, NJ |
|
|
1318-1327 |
|
|
|
| Power Systems for small underwater vehicles: The MIT/ | Marine Industry collegium held in Cambridge, MA Oct 5,1988 |
|
1988 | MIT/NOAA Sea Grant and Extramural Program | NTIS#PB89148043 |
|
40p | discusses various kinds of propulsion power | sources available including Stirling engines |
|
| Power to Burn | Article | Rennie, John P. | 1989 | Scientific American Vol 260, Jan. 1989 |
|
|
pp. 100-101 | Short article on Stirling engines |
|
|
| Power Transformer for artificial heart |
|
Thumin, A.K. | 1969 | Proc First Artificial Heart Conf. Washington DC |
|
|
915-926 | June |
|
|
| Powerpants for Military AUV's | New Developments in Warship Propulsion | Walker, G.;Reader, G.T. | 1989 | RIINA Conf. London, 14-15 Nov. 1989 |
|
|
|
|
|
|
| Practicability Study of Stirling Engine total energy systems |
|
Lehrfeld, D. | 1977 | IECEC 12th Conf. Proceedings\DOE Report COO-2947-3 | SAE#779251 |
|
1504-1511 | Philips Laboratory, Briar cliff Manor, NY |
|
|
| Practical bellows seal for Stirling Engines, A | Paper |
|
1986 |
|
SAE#869130 |
|
|
|
|
|
| Practical Phillips Cycle for Low Temperature Refrigeration |
|
Higa, W. | 1965 | Cryogenic Technology |
|
|
203 |
|
|
|
| Prast Engine |
|
|
1981 | Sunworld | Vol. 5 No. 3 |
|
|
Diagram and short discussion on Prast engine. |
|
|
| Precision castings advance the development of the Stirling | Engine | Neelen, G.T.M. | 1971 | Giesserei, Vol 58 April 8 |
|
|
166-170 |
|
|
|
| Prediction of Leakage Mass through Gas Springs | Rome Univ.(Italy) | Bossio, R.O.; Naso, V. | 1987 | IECEC 22nd Conf. Proc. Philda, PA 10-14 Aug 1987 | NTIS#DE89793131 |
|
5p | 021,447 |
|
|
| Prediction of mass flow rate losses through Stirling Engine | seals |
|
1987 |
|
SAE#879345 |
|
|
|
|
|
| Prelimary Design of a 25 kW Free-Piston Stirling Hydraulic | Converter Integrated with Reflux Boiler Receiver | Ross, B. A. et.al. | 1993 | DOE\NASA/0377-1 | NASACR 155201 |
|
|
|
|
|
| Preliminary Assessment of a Magnetically coupled Free-Piston | Stirling Engine Heat Pump Compressor | Beale, W.T.;Chen, G. | 1988 | Oak Ridge National Labs f/Sunpower Inc. | NTIS#DE88013835 |
|
6p |
|
|
|
| Preliminary assessment of Rover Power Systems for the Mars | Rover Sample Return Mission | Bents, D.J. | 1989 | NASA Lewis Research Center | NTIS#N89235188 | NASATM-102003 | 26 | Discusses the possibilty of using nuclear heat for | power a Free-Piston power source as well as others |
|
| Preliminary Design of a 25 kW Free-Piston Stirling hydraulic | Converter integrated with a Reflux Boiler Receiver | Ross, B.A.; et al |
|
NASA\DOE | NASA CR-155201 |
|
|
|
|
|
| Preliminary Design of an Advanced Stirling System | for Terrestrial Solar Energy Conversion | White, Maurice A. et al. | 1990 | IECEC 25th Proc. Vol 5. Aug 12-17 1990 Reno NV | SAE#900546 | 90-5-297 |
|
|
|
|
| Preliminary Design of Linear Alternator Dynamometer for | Free-Piston Stirling Engines. Final Report |
|
|
|
DE85015078 |
|
|
NTIS557186 |
|
|
| Preliminary Design Review |
|
Cummins Engine Company | 1989 | Design review held at NASA Lewis Research Center |
|
|
|
Nov 2-3, 1989 |
|
|
| Preliminary Designs for 25 Kwe Advanced Stirling Conversion | System for Dish Application: Final report | Shaltens, R.K., Schrieber, J.G. | 1990 | NASA Lewis Research Center f/DOE | NTIS#N90267295 DOE/NASA33408-1 | NASATM-103188 | 19 |
|
|
|
| Preliminary Designs for 25 KWe Advanced Stirling conversion | systems for Dish Electric Applications | Shaltens, R.K.; Schreiber, J.G. | 1990 | IECEC 25th Conf. Proc.\NASA | TM-103188 | 90-6-310 |
|
|
|
|
| Preliminary results from a four-working space double acting | Stirling Engine controls model |
|
1980 |
|
SAE#809337 | DOE/NASA1040-17 |
|
|
|
|
| Preliminary SP-100/Stirling heat exchanger designs |
|
Paul Schmitz...et al | 1993 | NASA | NASA TM-106444 |
|
|
|
|
|
| Preliminary study on solar dynamic power systems for space u |
|
|
1987 |
|
SAE#879164 |
|
|
|
|
|
| Present State of the Art of the Phillips Stirling Engine |
|
Van Beukering, H.C.J.; Fokker, H. | 1973 | SAE Meeting June 18-22 1973 | SAE#730646 |
|
15 | Philips Gloeilampenfabrieken, Eindoven, Netherland | also in Auto Eng. vol 81, No. 7 July |
|
| Pressure and Temperature variations on a Stirling Engine |
|
Gomes, M.S.P.; Parise, J.A.R. | 1987 | Proc. 9th Brazilian Congress on Mech. Eng. | COBEM 87 |
|
411-414 | Florianopolis Brazil, Dec 87 |
|
|
| Pressure drop across Regenerator of Stirling Cycle | Machine-Density and Frequency effects | Walker, Graham | 1963 | Engineer, v216 n5631 Dec 27 1963 |
|
|
1063-6 | Measurements made in pressure variation of working | fluid in compression and expansion spaces of | Stirling cycle engine. |
| Pressure mass distribution and velocity of the gas in a | Thermo-Mechanical Generator Stirling Cycle Engine | Franklin, E. | 1968 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #2106 |
|
|
|
|
|
| Pressurized Hot Air Engine. A |
|
Collins, F.M. | 1977 | Model Engineer, Vol 143, July 15 |
|
|
822-875 |
|
|
|
| Principles and Applications of Stirling Engines |
|
West, Colin D. | 1986 | Van Nostrand Reinhold Co., NY |
|
|
247 p. |
|
|
|
| Proceedings of 3d International. Stirling Engine Conference | Volume 1, Rome June 25-27 1986 |
|
1986 | Assiociazione Termotecnica Italiana, Turin | NTIS#DE90733698 |
|
409P JUN 86 |
|
|
|
| Proceedings of the 3rd International Stirling Engine Conf. |
|
Associazione Termotecnica Italiana Turin | 1989 | Rome Univ funded, June 25-27 1986 |
|
|
441p | Topics covered were engine design and analysis | heat transfer, experimental test results | novel energy conversion units |
| Proceedings of the DOE Heat Pump Contractors Program Integra | Meeting |
|
1981 | DOE Washington, | NTIS#DE82012370 | DOESF10538T12V1 | 104p |
|
|
|
| Proceedings: Fourth Parabolic-Dish Solar-Thermal Power Prog. |
|
|
1982 | Jet Propulsion Laboratory, Pasadena CA f/DOE | NTIS#DE83011247 | DOEJPL106058 | 324p | also NTIS#N83-23705/7 |
|
|
| Program to Develope Stirling based Commercial Products | The Detroit Diesel Corp/Stirling Thermal Motors | Bennethum, James; Laymac, Thomas | 1991 | IECEC 26th Conf. Proc. |
|
|
198-207 |
|
|
|
| Programmatic Status of NASA's High Capacity Power Stirling | Space Power Converter Program | Dudenhoefer, J.E. | 1990 | IECEC 25th Conf. Proc. Aug 12-17,1990 | SAE#900676 | NASATM-103142 |
|
|
|
|
| Programming Status of NASA's CSTI High Capacity Power | Stirling Space Power Converter Program | Dudenhoefer, J.E. | 1990 | NASA | TM-103112 |
|
|
|
|
|
| Progress of Stirling Cycle Analysis and Loss Mechanism Chara |
|
|
1987 |
|
NTIS#N8713359/1 | NTIS#DE87003288 |
|
709,576 |
|
|
| Progress on 3kw class Stirling Engine and Heat Pump System |
|
|
1986 |
|
SAE#869105 |
|
|
|
|
|
| Progress toward the evolution of a Stirling Space Engine |
|
Alger, D.L. | 1987 | NASA Lewis Research Center | NTIS#N88140462 | NASATM-100221 | 15p |
|
|
|
| Progress with a Stirling Cycle Simulation using Lagrangian | Coordinates | Rix,D.M. | 1986 | 3rd Int. Stirling Engine Conf. Vol 1 | ISEC 86-iii-55 |
|
225-238 |
|
|
|
| Proof of a Theorem on Hybrid Stirling Engines |
|
Senft, Dr. James R. | 1981 | UW-RF Research Report |
|
|
|
|
|
|
| Proof of concept of a magnetically coupled Stirling Engine | Heat Pump | Shonder, John A.; Chen, G.;McEntee, J. | 1992 | IECEC 27th Proceed.\Oak Ridge Nat. Labs\Sunpower | SAE#929395 |
|
5.437-5.442 |
|
|
|
| Proof of principle investigation of 300 W(e) Stirling | Engine piezoelectric (STEPZ) generator | White, M.A. | 1973 | MDAC Final Report | No. MDC G4420, Sept |
|
|
|
|
|
| Properties of Materials in High Pressure Hydrogen at | Cryogenic, Room and Elevated Temperatures | Harris, J.A., Van Wanderham M. | 1973 | Vol 2 | FR-5768 July 1973 |
|
503- |
|
|
|
| Proposed Guidelines for Reporting Performance of a Solar | Dish/Electric Generation system | Stine, William; Powell, Mark A. | 1993 | IECEC 28th Conf Proceedings, | SAE#93186 | Pg. 2.503 |
|
Guidelines for experimentally validating system | performance |
|
| Prospects for a Marine Stirling Engine |
|
Reader, G.T. | 1977 | Journal of Naval Engineering Vol 126 |
|
|
66-75 |
|
|
|
| Prospects of Ceramics in Stirling Engines |
|
Holgersson, S.;Lia, T.;Gummesson,S. | 1977 | Diesel Engineering, Winter 1977 |
|
|
8p |
|
|
|
| Prospects of the Stirling Engine for vehicular propulsion |
|
Meijer, Roelf J. | 1970 | Philips Technical Review Vol 31, No. 5/6 |
|
|
168-185 |
|
|
|
| Prototype Liquid Free-Displacer Stirling Engines, A |
|
Goldberg, L.F. | 1979 | IECEC 14th Conf. Proc. Boston Aug | SAE#799239 |
|
|
|
|
|
| Pseudo-Stirling Cycle-suitable performance criterial |
|
Reader, G.T.; Hooper, C. | 1978 | IECEC 13th Conf. Proc. | SAE#789116 |
|
|
|
|
|
| Publication |
|
|
1978 | Jet Propulsion Laboratory | Publication #78-71,2 |
|
|
|
|
|
| Pulse Tube Refrigeration: A New type of Cryocooler |
|
|
1990 |
|
NTIS#PB90-192469 |
|
|
030,852 |
|
|
| Pumping characteristics of a Jet-Stream Fluidyne |
|
Lloyd, Hensmen | 1979 | Royal Navy Engineering College |
|
|
|
|
|
|
| Pumping Ring Analysis |
|
Keith, T. | 1978 | DOE Hwy Veh. Syst. Cont. Coordinating Mtg, Troy MI |
|
|
May |
|
|
|
| Quarterly Technical Progress Report |
|
MTI Staff | 1979 | NASA Sept 1979 |
|
NASACR-159610 |
|
|
|
|
| R & D on Small Stirling Engine TNT-2 & NAS-1 |
|
Watanable, H. | 1992 | IECEC |
|
|
|
|
|
|
| R & D on Solar Stirling Engine TNT's |
|
Isshiki, N. | 1991 | 5th Int. Stirling Engine Conf. |
|
|
|
|
|
|
| R and D: Technology Assessment Heat Engine components |
|
|
1977 | TRW, Inc. McLean VA Energy Systems Planning Div | NTIS#DOESF90478T2 |
|
11p |
|
|
|
| R&D on Small Solar Stirling Engines TNT-2 & NAS-1 |
|
Isshiki, N.;Watanabe,H.;Shishido,K. | 1991 | IECEC 26th Conf. Proceedings/Nihon Univ. |
|
|
382-385 |
|
|
|
| Radially pleated diaphrams for Stirling Engines |
|
|
1982 |
|
SAE#829301 |
|
|
|
|
|
| Radioisotope energized Stirling Engine for Spacecraft | auxiliary electrical power, The | Leach, C.E.; Fryers, B.C.; | 1969 | Battelle Memorial Inst., Richland WA | SAE#699081 |
|
|
|
|
|
| Radioisotope energized undersea Stirling Engine |
|
Leach, C.E.; Fryer, B.C. | 1968 | IECEC 3rd Conf. Proc. Boulder, CO |
|
|
830-844 |
|
|
|
| Radioisotope Stirling Engine for circulatory support, A |
|
Buck, K.E.;Forrest,D.L.;Tamai,H.W. | 1968 | IECEC 3rd Conf. Proc.,Boulder,CO Aug 14-16 | #723-732 |
|
|
|
|
|
| Radioistope-fuelled Stirling Engine artifical heart system |
|
Martini, W.R.;Riggle, P.;Harmison, L.T. | 1972 | Nuclear Technology, Vol 13 |
|
|
194-208 |
|
|
|
| RE-1000 Free Piston Stirling Engine update |
|
|
1985 | IECEC Conf. Proceedings | SAE#859141 |
|
|
|
|
|
| RE-1000 Free-Piston Stirling Engine Sensitivity Test results |
|
Schreiber, J.G.;Geng, S.M.;Lorenz, G.V. | 1986 | DOE/NASA/1005-11 | NTIS#DE87004810 | NASATM-88846 |
|
Oct. 1986 |
|
|
| Rebirth of the Stirling Engine |
|
Meijer, Roelf J. | 1969 | Science Journal, Vol. 5a No. 2 |
|
|
31-39 |
|
|
|
| Recent Development of the Flat Plate Stirling Engine |
|
Kolin, Ivo | 1986 | IECEC 21st Conf. Proc. Amer. Chem. Society, Aug | SAE#869113 |
|
501-506 |
|
|
|
| Recent History of developments in Stirling Machines |
|
Walker, Graham | 1978 | Inst. of Gas Tech. Sem, Stirling Cycle Prime Mover |
|
|
|
Chicago, IL, June |
|
|
| Recent Results from the reversing flow test facility |
|
|
1987 |
|
SAE#879102 |
|
|
|
|
|
| Recent Stirling Engine Loss-Understanding results |
|
Tew, R.C.;Thieme, L.G. at NASA | 1990 | IECEC 25th Conf. Proc. | NTIS#N90211145 | NASATM-103122 | 11P |
|
|
|
| Reduction of Torque pulsation of Stirling Engine Compressor |
|
Koda, Toshihide; Fujiwara, Michio | 1991 | IECEC 26th Conf. Proc./Amer. Nuclear Society |
|
|
251-255 | General Research Laboratory, Mitsubishi Electric | Corporation |
|
| Reflux Heat Pipe Solar Receiver for a Stirling Dish-Electric | System | Ziph, B.;Godett, T.M. | 1987 | Stirling Thermal Motors Inc, f/DOE/Sandia Labs | NTIS#DE87009289 | SAND862828C | 18p |
|
|
|
| Reflux Heat-Pipe Solar receivers for Dish-Electric systems |
|
Andraka, C.E.;Diver,R.B. | 1988 | IECEC 23rd Conf. Proceedings/Sandia Labs | SAE#889213 | SAND87-2976C |
|
|
|
|
| Reflux Pool Boiler as a heat transport device for Stirling | Engines:Postmotem analysis and next generation design | Moreno, J.B.;Andraka, R.B.;Diver, T.A. | 1991 | IECEC 26th Conf. Proceedings | SAND91-1103C |
|
355-362 |
|
|
|
| Reflux pool-boiler as a heat transport device for Stirling | Engines | Andraka, C. E.,Moreno, J. B. | 1990 | IECEC 25th Conf. Proc., Reno, NV, 12-17 Aug | NTIS#DE90011021 |
|
|
|
|
|
| Regeneration in Stirling Engines |
|
Walker, Graham | 1962 | Engineer, v216, n5579 Dec 28, 1962 |
|
|
1097-1103 | Description of regenerative process and comparison | drawn between actual and theoretical conditions | v214? |
| Regenerative Characteristics of a magnetic or gas Stirling | Refrigeration Cycle | chen, J.; Yan, Z. | 1993 | Cryogenics, V33 No. 9 Sept 1993 |
|
|
|
Butterworth, Heineinman Ltd, London |
|
|
| Regenerative Engines with dense phase working fluids; the | Malone Cycle |
|
1980 | SAE | SAE#809454 |
|
|
|
|
|
| Regenerative Gas Cycle Air Conditioning using Solar Energy |
|
Crouthamel, M.S.;Shelpuk, B | 1975 | RCA August 75 | NSF/RANN/SE/GI44098/FR/75/2 | ATL-CR-75-10 |
|
|
|
|
| Regenerative Heat Engines |
|
|
1931 | Engineer, v152 no. 3938 July 3, 1931 |
|
|
14 | Review of various heat engines including the | Stirling |
|
| Regenerative Thermal Machines |
|
Finkelstein, Theodore | 1961 | Battelle Technical Review, May |
|
|
|
also in Int.Science and Technology, May |
|
|
| Regenerative Thermal Machines-Status Survey |
|
Walker, Graham | 1965 | Amer. Power. Conf. Proc vol 27 April 65, Chicago |
|
|
530-539 | Survey of history, present status of developement | future potential application with reference to | their use as prime movers |
| Regenerator Analysis: Validation of the MS*2 Stirling Cycle | Code, | Bauwens, L.;Mitchell, M.P. | 1991 | XVIII Int.Congress of .Refrigeration |
|
|
Pg. 930-934 |
|
|
|
| Regenerator Elements for Internal Combustion Stirling | Engine | Isshiki, Naotsugu;Moriya, Shinji | 1992 | IECEC 27th Proceedings\Nihon Univ\TOKIMEC Co. Inc. | SAE#929387 |
|
5.405-5.410 |
|
|
|
| Regenerator Optimization of a Free-Piston Stirling Engine | Paper |
|
1987 |
|
SAE#879346 |
|
|
|
|
|
| Regenerators for Stirling Machines |
|
Vonk, G. | 1962 | Philips Technical Review | Rev., 24 |
|
pg.406 |
|
|
|
| Regenerators for Stirling Machines |
|
Vonk, G. | 1962 | Philips Technical Review, No. 24 |
|
|
406 |
|
|
|
| Regenerators with longitudinal heat conductors |
|
Schultz, B.H. | 1951 | Inst. of Mech. Engineers, London |
|
|
|
|
|
|
| Reliability Study of Stirling Engines for Solar Dish/Heat | Engine Systems | Holtz, R.E.;Uherka, K.L. | 1987 | Argonne National Lab.,IL f/DOE | NTIS#DE87011387 | CONF87080415 | 9p | 801,145 |
|
|
| Remarkable New Motor, A |
|
Anon | 1889 | Engineering News Sept 14, 1889 |
|
|
pp. 242-46 |
|
|
|
| Report |
|
Gill, P.F. | 1980 | Royal Naval Engineering College |
|
|
|
|
|
|
| Report |
|
Hensman, T.W. | 1980 | Royal Naval Engineering College |
|
|
|
|
|
|
| Report |
|
Lewis P.D. | 1978 | Royal Naval Engineering College | RNEC-TR-78001 |
|
|
|
|
|
| Report |
|
MTI Limited | 1980 | NASA |
|
NASACR-159827 |
|
|
|
|
| Report |
|
Carr G. | 1979 | Royal Naval Engineering College | M. Sc. Report |
|
|
|
|
|
| Report |
|
|
1979 | United Technologies Research Center Report | R77-719021 |
|
|
|
|
|
| Report |
|
Ford Motor Company | 1978 | NASA |
|
NASACR-159436 |
|
|
|
|
| Report |
|
Kitzner, E.W. | 1980 | NASA |
|
NASACR-159836 |
|
|
|
|
| Report |
|
Comerstone, W. | 1980 | Royal Naval Engineering College |
|
|
|
|
|
|
| Report |
|
Percival, W. H. | 1974 | NASA |
|
NASACR-121097 |
|
|
|
|
| Report |
|
MTI | 1979 |
|
Report 79 |
|
ASE 33 TO1 |
|
|
|
| Report |
|
MTI | 1979 | MTI report | 79 ASE 43 QT3 |
|
|
|
|
|
| Report |
|
|
1977 | United Stirling report | 77-0057C,77-0003C |
|
|
|
|
|
| Report |
|
|
1979 | MTI report | #ASE 43 QT3 |
|
|
|
|
|
| Report |
|
Fortgang, H.R. Mayers, H.F. | 1980 | NASA | CR-163265 |
|
|
|
|
|
| Report |
|
MTI | 1979 | NASA | CR-159631 | NASACR-159631 |
|
|
|
|
| Report |
|
Thwaites, G. | 1978 | Royal Naval Engineering College |
|
|
|
|
|
|
| Report |
|
West, Colin. | 1970 | AERE | R6522 Report |
|
|
|
|
|
| Report |
|
West, C. | 1971 | AERE | R6775 |
|
|
|
|
|
| Report |
|
General Motors | 1978 | General Motors Research Center | GMR-2690, part 4 |
|
|
One of a series of reports put out by GMR on | portions of their stirling engine program |
|
| Report |
|
Krauter, A.I. Cheng, H.S. | 1979 | NASA | CR-159543 |
|
|
|
|
|
| Report |
|
Hughes, W.F. Yang,Y. | 1980 | 5th Int. Symp. on Automotive Propulsion Systems |
|
|
|
|
|
|
| Report |
|
General Motors | 1978 | General Motors Research Center | GMR-2690, part 5 |
|
|
|
|
|
| Report |
|
|
1980 | NASA\Mechanical Technologies Inc | MTI 80 ASE 129 QT8 | NASACR-159851 |
|
|
|
|
| Report |
|
Ford Motor Company | 1977 | Ford Motor Company | C00/2631-22, NTIS 78N-23442 |
|
|
|
|
|
| Report |
|
|
1980 | NASA\Mechanical Technology Inc | MTI report 79 ASE 101 QT6 | NASACR-159744 |
|
|
|
|
| Report |
|
Mattavi. J.N. | 1970 | General Motors Research Center | GMR-2690 paper 7.111 |
|
|
|
|
|
| Report |
|
Schab, H.A. | 1964 | U.S.Navy Marine Engineering Laboratory | MEL 152/64 |
|
|
|
|
|
| Report |
|
Rosenqvist, K. | 1980 | 5th Int. Auto. Propulsion Systems Symposium |
|
|
pp. 238-263 |
|
|
|
| Report |
|
Andersen, N.E. | 1979 | Tech. University of Denmark | RE 79-8 |
|
|
|
|
|
| Report |
|
Burke, J.A. | 1977 | 4th Int. Symposium on Auto. Propulsion Systems |
|
|
|
|
|
|
| Report |
|
General Electric | 1978 | General Electric Compary Report 78D54244 | CR-159391 | NASACR-159391 |
|
|
|
|
| Report from the Engine Room |
|
West, Colin D. | 1988 | Stirling Machine World, March 1988 |
|
|
pp. 11-14 |
|
|
|
| Report on Third International Stirling Engine Conference |
|
|
1986 |
|
SAE#869101 |
|
|
|
|
|
| Requiem for the piston engine? |
|
Underwood, F.A. | 1970 | Machine Design, Aug 6 |
|
|
20-34 |
|
|
|
| RESD Summary Report |
|
|
0 | NASA\Mechanical technology Inc. | MTI84ASE3560R3 | NASACR-174674 |
|
DOE/NASA /0032-23 |
|
|
| Research and Development on a 3 KW class Stirling Engine | (included in Misubishi Denki Giho, v62 v10 p81-84 1988) | Suganami, T,; Fujiwara, M.; Saki, M. | 1988 | Mitsubishi Electric Corp | NTIS#PB89150304 |
|
5p |
|
|
|
| Research Experimental Results of Stirling Engine Hot Heads | with Heat Pipes | Gonnov, Igor V,; Loktionov, Yury V.; | 1993 | IECEC 28th Conf. Proceedings Vol 2 | SAE#93021 |
|
2.669 E | Science & Technology Innovation Center, | ENERGO, 21 Jyrcgativ St., Obninsk, Kaluga Region | 249020 Russia |
| Residential Gas Heat Pumps: A Developing Technology |
|
Gas Research Institute, Chicago, IL | 1987 | Gas Research Institute | NTIS#PB88142187 | GRI870331 | 12p |
|
|
|
| Resonant Driven Stirling-PZ Generator for AHP Systems |
|
Benson, G.M. | 1967 | ERG 1967 |
|
|
|
|
|
|
| Resonant Stirling Engine Generator |
|
Anderson, W. | 1986 | Unique Mobility, Inc. | SBIR Phase I Final Report |
|
|
|
|
|
| Results from Baseline Tests of the SPRE I and Comparison | with Code Model Predictions | Cairelli, J.E. | 1989 | NASA | TM-102044 |
|
|
|
|
|
| Results from baseline tests of the SPRE(Space Power Research | Engine)1 and Comparison with code Predictions | Cairelli, J.E.;Geng, S.M.;Skupinski, R.C | 1989 | IECEC 24th Conf. Proc. / (NASA report) | NIS#N89235279 | NASATM-102044 | 14p |
|
|
|
| Results from testing a Hermetically Sealed, Single Cylinder | Stirling Engine | Carlqvist, Stig G.,Gothberg,Y. | 1989 | CMC Aktiebolag, Malmo.,Swed-Recom AB | SAE#899263 |
|
|
|
|
|
| Results from testing the ECA Energy Conversion System |
|
Carlqvist, Stig G. | 1988 | 4th Int. Conf of Stirling Engines, Tokyo 1988 |
|
|
|
|
|
|
| Results from testing the Multi-Purpose indirectly heated | ECA Stirling Engine | Carlqvist, S.G. | 1987 | IECEC AIAA | SAE#879159 |
|
pp. 1817-1820 |
|
|
|
| Results of a 40 kW Stirling Engine and Comparison with the | NASA Lewis Computer Code Predictions. Final Report | Allen, D.J.;Cairelli, J.E. | 1988 | NASA Lewis Research Center | NTIS#N88190137 | NASATM-87050 | 14p Mar 88 |
|
|
|
| Results of FY 1979 Project Appraisal D. Vol II. Heat Engines | Worksheets (Cont. D) |
|
1983 |
|
NTIS#DE81025438 |
|
|
|
|
|
| Resurrection of the Stirling Engine, The | Old wine in New bottles, | Hirschfeld, Fritz | 1978 | Mechanical Engineering October 1978 |
|
|
pp. 38-41 | discussion of work at Mechanical Technology Inc | and Ford Stirling engine |
|
| Retrofitting a Stirling add-on plant into a naval submarine | with adisplacement in excess of 2000 tonnes | Sylvestre, R.A. | 1988 | IECEC 23rd Conf. Proc. dever |
|
|
|
|
|
|
| Reversing Flow Test Facility. Technical Report. March 1986 |
|
|
1986 |
|
NTIS#DE860114615 |
|
|
704,154 |
|
|
| Review of applications and of extended power density of 4 | cylinder in-line and hermetic Stirling Engine | Carlqvist, Stig G.;Gothberg,Yngve | 1991 | IECEC 26th Conf. Proceedings |
|
|
211-216 |
|
|
|
| Review of Ford/Philips Program. |
|
Postma, N.P. | 1975 | Highway Veh. Syst. Cont. Coord. Mtg, EDRA Wash DC |
|
|
|
|
|
|
| Review of Stirling Engine Mathematical Models |
|
|
1983 | Oak Ridge National Laboratories f/DOE | NTIS#DE83016454 | ORNLCON135 | 39p | Aug 83 |
|
|
| Revised Isothermal Analysis Program for Stirling Engines |
|
Martini, William R. | 1983 | Martini Engineering, Richland WA f/DOE | NTIS#DE83017276 | CONF83081243 | 6p | IECEC 18th Conf Orlando, FL |
|
|
| Revival of 1816 Stirling Engine Cycle produces quiet, | efficient engine for 1960 | Flynn, Gregory; Percival, W.; Heffner, F | 1960 | SAE Journal April 1960 |
|
|
42-51 | Among the very first stories about the Stirling | Engine. focuses on General Motors Research | Center efforts. |
| Revolutionary on site energy source for your home |
|
Lindsley, E.F. | 1975 | Popular Science, October 1974 | see SAE#749154 |
|
pp. 83-85 | Description of John Roesel's hydraulic pseudo- | Stirling engine power system, phots and diagrams | Precise Power Corp., Bradenton, Fla |
| Rhombic Drive Stirling Engine, A. |
|
Ross, M.A. | 1976 | Model Engineer, Vol 142 Pts 1 & 2,Aug 6,20 |
|
|
760-762,796-799 |
|
|
|
| Rice Husk Energy Project Leads the way |
|
|
1982 | Stirling Engine Newsletter Feb 82 |
|
|
8 |
|
|
|
| Ricerca bibliografica sulle tenute in motori non | convenzionali a circlo Stirling e a circlo Brayton. | Rovetta, A.; Massa E. | 1977 | Inst of Mechanics of Machines, Polytechnic Milan | Tech. Report 76-77.1 |
|
|
|
|
|
| Rider Stirling Engine, A. |
|
Ross, M.A. | 1977 | Model Engineer, Vol 143, feb. 4 |
|
|
160-161 |
|
|
|
| Ringbom Engine Design |
|
Senft, James R. | 1986 | Int. Stirling engine Conf. June 1986 rome |
|
|
|
|
|
|
| Ringbom Stirling Engines |
|
Senft, James R. | 1993 | Oxford University Press, NY |
|
|
|
b. 1942 |
|
|
| Ringbom-Stirling Engine Simulation and Parametric Study |
|
Srinivasen, V.;Walker, G.;Sendft, J.R. | 1985 | ASME | ASME-85-DGP-21 |
|
|
|
|
|
| Robinson Hot Air Engine | Article |
|
1883 | The Engineer, July 13th, 1883 | The Engineering and Metal Trades Exhibition |
|
pg. 23 | Diagram of this new engine. |
|
|
| Robinson Hot Air Engine, The |
|
Mallet, T. | 1973 | Model Engineer, Vol 139 |
|
|
160 |
|
|
|
| Robinson type Hot Air Engine. A |
|
Westbury, E.T. | 1970 | Model Engineer, Vol 136 |
|
|
164,216,268,320 |
|
|
|
| Roesel Closed Cycle Heat Engine, The |
|
Morash, R.T.; Marshall, O.W. | 1974 | IECEC 9th Conf. Proc. San Francisco | SAE#749154 |
|
1117-1124 | Unusual combination of hydraulics and gas pressure | make this engine work, interesting mode of | operation. |
| Rolling diaphram seal for high pressures and high speeds, A |
|
Van Beukering, H.C.J.;van der Aa, H.H. | 1967 | 3rd Int Conf on Fluid Sealing, Cambridge, Eng | Paper No. G421 |
|
|
|
|
|
| Room Temperature Fatigue Properties of Alloy XF-818 |
|
Cronin, M.J. | 1985 | NASA Automotive Stirling Engine program | Cont. DEN3-32 April 1985 |
|
|
Mechanical Technologies Contract |
|
|
| Ross-Stirling Engines: Variations on a theme. |
|
|
1986 | Univ. of Calgary, Dept of Mech. Engineering | SAE#869132 NTIS#DE90012562 |
|
19 | given at 3d Ins. Stirling Engine Conf. (Rome) |
|
|
| Ross-Stirling Spacecraft Refrigerator, A |
|
Walker, Graham, Scott, M. | 1987 | IECEC 22nd Conf. Proc. Vol IV | SAE#879411 |
|
pp 1870-1874 |
|
|
|
| Rotary Liquid Piston Stirling Engine |
|
Baer, Stephen C. | 1987 | IECEC AIAA | SAE#879426 |
|
pp. 1920-1923 |
|
|
|
| Rotary Piston configuaration suitable for operation as a | Stirling Cycle Machine | Reich, S.A. | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug 20-25 |
|
|
|
|
|
|
| Rotary Reciprocating Refrigeration System Studies Pt. 1 |
|
Breckenridge, R.W. Jr. et al | 1971 | Arthur D. Little Inc., Cambridge, MA | #AFFDL-TR-71-115 Part 1, Sept. |
|
|
|
|
|
| Rotary Stirling Cycle Engine and generator: Advance heat | engine and motor generator combined | NASA | 1990 | NASA Washington,DC/NTIS Tech. Note Oct 90 | NTIS#NTN900864 |
|
1 | 1 page article in NASA Tech Briefs June 1990 | describes work at Lyndon Johnson Space Center | uses computer driven motor/generator systems |
| Safety considerations for high temperature thermal energy | storage in fluoride salts |
|
1977 | IECEC 12th Conf. Proc. Washington DC | SAE#779092 |
|
|
|
|
|
| SAGA: Sous-Marin d'assustance a grand Automie(SAGA: Highly | Autonomus Assistance Submarine(in French) | Mollard, J,;Grandvaus, B. | 1988 | Compagnie Maritime d'Expertises, Marseille(France) | NTIS#N88260344 |
|
4p Mar 88 |
|
|
|
| Sawdust to Power now efficient in Small Size |
|
Martini, W.R. | 1980 | Stirling Engine Newsletter May 1980 |
|
|
6 |
|
|
|
| SBP Dish/Stirling, 7.5m/9 kW |
|
Schiel, W.J. | 1992 | International Energy Agency Solar Paces Task I | Working Group Meeting, Almeria, Spain |
|
|
|
|
|
| Scaling of Miniature Cryocoolers to Microminiature Size, | Applications | Little, W.A. | 1979 |
|
|
|
|
|
|
|
| Scaling Rules for Stirling Engines |
|
Gedeon. David R. | 1981 | IECEC 16th Conf. Proceedings | SAE#819796 |
|
|
|
|
|
| Schmidt Analysis, The |
|
Reader, Graham T. | 0 | Royal Engineering College | RNEC-TR-80012 | DRIC |
|
|
|
|
| SEAM1: Stirling Engine Analysis Rioe Solution |
|
|
|
|
DE86057943 |
|
|
|
|
|
| SEAMOPT: A Stirling Engine Performance Optimization Code |
|
|
1987 |
|
NTIS#DE87003580 |
|
|
723,962 |
|
|
| SEAMOPT-Stirling Engine Optimization Code |
|
Heames, T.J.;Daley, J.G. | 1984 | Argonne National Laboratory, f/DOE | NTIS#DE84012098 | CONF84080413 |
|
IECEC conf San Francisco Aug 84 |
|
|
| Second Annual Report to Congress on the Automotive | Technology Development Program |
|
1981 |
|
NTIS#DOE/CS-0069/1 |
|
|
|
|
|
| Second Generation Sodium Heat Pipe Receiver for a USAB V-160 | Stirling Engine: Development and On-Sun Results | Goebel, Olaf, Laing, Doerte | 1993 | IECEC Conference 28th Conf. Aug 92 | SAE#93176 |
|
|
|
|
|
| Self acting cooling cycles |
|
Finkelstein, Theodore | 1953 | D.I.C. Thesis Imperial College, London |
|
|
|
|
|
|
| Self starting intrinsically controlled Stirling Engine |
|
Martini, William R.;Pollster,N.E. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept 17-19 | SAE#769259 |
|
1511-1518 |
|
|
|
| Serpent Project, The |
|
Reader, G.T.;Clark, M.A. | 1982 | 2nd Interpolytechnic Conf. on Thermodynamics | Paper 15 |
|
|
|
|
|
| Should we have a new engine? An automobile power systems | evaluation | Barker, J.J. | 1965 | Cal. Inst of Tech. Vol. 2 Tech. Reports | SAE Spec Pub SP399, SP400 |
|
|
same title listed under Stephenson, R.R.;JPL | report SP43-17 1975 |
|
| Siemens' Regenerative Steam Engine |
|
|
1856 | Engineer, August 8, 1856 |
|
|
419-420 |
|
|
|
| Sigma Research Conceptual Design of Thermal Energy | Storage for a Stirling Engine Vehicle | Waters, E.D. | 1978 | DOE Highway Vehicle Systems Cont. Coordination | Meeting Troy, Michigan May 9-12, 1978 |
|
|
|
|
|
| Sigma research conceptual design study of energy storage for | a Stirling car | Waters, E.D. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy, MI |
|
|
|
|
|
|
| Simple analysis of Nickel transport in heat pipes of | Stirling Engine power conversion systems | Tower, Leonard | 1992 | IECEC 27th Proceedings\sverdrup Technology Inc | SAE#929400 |
|
5.461-5.466 |
|
|
|
| Simple derivation of the generalized Beale Number., A |
|
Senft, Dr. James R. | 1982 | IECEC 17th Conf. Proceedings, Los Angles, CA | SAE#829273 |
|
|
Univ of Wisc., River Falls |
|
|
| Simple Hot Air Engine, A |
|
Sheppard, E.W. | 1984 | Model Engineer, April 1984 |
|
|
pg. 403 | Discussion of model Hot Air Engine |
|
|
| Simple models for analysis and design of practical Stirling | Engines |
|
1981 |
|
SAE#819798 |
|
|
|
|
|
| Simple Theory of the heat Regenerator, A |
|
Tipler, W. | 1947 | Shell Petroleum Co. Ltd | Technical Report No. ICT/14 |
|
|
|
|
|
| Simple vector analysis of Stirling Machine's performance |
|
Isshiki, Naotsugu | 1992 | IECEC 27th Proceedings\Nihon Univ. | SAE#929030 |
|
5.59-5.68 |
|
|
|
| Simplified Analysis of Stirling Engine and Heat Pumps |
|
|
|
|
DE85005366 |
|
|
NTIS551842 |
|
|
| Simplified Expression for the power output of a lossless | Stirling Engine | Cooke-Yarborough, E.H. | 1974 | Harwell Atomic Energy Research Establishment | AERE-M2437 March |
|
|
|
|
|
| Simplified Heat Engine |
|
Higa, W.H. | 1967 | Jet Propulsion Laboratory, Pasadena, CA Report | Report No. 30-3297/NPO-13613 |
|
|
|
|
|
| Simplified Heat Engine. A |
|
|
1976 | Compressed Air, Vol 81 No.9 Sept 76 |
|
|
|
Compressed Air Magazine, 253 E. Washington Ave | Washington, NJ 07882-2495 |
|
| Simplified Regenerator Theory.,A |
|
Schalkwijk, W.J. | 1958 | ASME Paper | No. 58-A-135 |
|
|
|
|
|
| Simplified Sibling Cycle Machine, A |
|
Mitchell, Matthew;Wilson, K.J.;Bauwens,L | 1989 | IECEC 24th Conf. Proceedings | SAE#899564 |
|
2289-2292 | Mitchel/Stirling Machines Systems, Berkeley CA |
|
|
| Simplified Stirling Engine circulatory Assist Device, A |
|
Martini, W. R.;Johnston, R.P.;White,M.A. | 1968 | Isotope and Radiation. Technology, vol 7 |
|
|
145-160 |
|
|
|
| Simplistic Model of Cyclic Heat Tranfer Phenomena in close | spaces | Lee, K.P. | 1983 | IECEC 18th Conf. Proc. |
|
|
720-723 | Facility & Manufacturing Automation, Inc, Sudbury, | MA |
|
| Simulation Model for the Design of Vuilleumier Machines |
|
Carlsen, H. | 1989 | ASME Meeting |
|
|
|
|
|
|
| Simulation of an Artificial Heart System |
|
Johnston, R.P.;White, M.A. | 1971 | MDCA report | No. WD-1589 |
|
|
|
|
|
| Simulation of Regenerative Reciprocating Machine on | Analog computer | Finklestein, Theodore | 1965 | Int. Auto Eng. Congress, Detroit, MI Jan | SAE#949F |
|
14p | Simulation lead to a better understanding of | and function of regnerators |
|
| Simulation Program for Multiple Expansion Stirling Machines |
|
Walker, G.;Weiss,R.;Fauvel, R.;Reader,G. | 1992 | IECEC 27th Proceedings | SAE#929036 |
|
5.97-5.100 |
|
|
|
| Single Battle Fuel, A | Article | Siuru, Bill | 1989 | Mechanical Engineering, April 1989 |
|
|
pg. 146 | Short article describes the Army's effort to try | and get one type of fuel for all uses, Stirling | generator sets(photographs) |
| Single Cylinder Valveless Heat Engine |
|
Chen, N.C.J.;West, Colin D. | 1991 | Oak Ridge National Laboratory f/DOE | SAE#879070 NTIS#DE91009646 | CONF87080451 |
|
|
|
|
| Sir George Cayley |
|
Pritchard, J.L. | 1961 | London |
|
|
|
|
|
|
| Sixth Annual Report to Congress on the Automotive Technology | Development Program |
|
1984 | DOE Wash, DC | NTIS#DE85005640 | DOECE00273 | 25p | Office of Vehicle and Engine research and | Development |
|
| Slope intercept diagnostic technique | Paper |
|
1987 |
|
SAE#879347 |
|
|
|
|
|
| Small Cryogenic Refrigerators |
|
Walker, Graham | 0 | Plenum Publishing Corp. NY |
|
|
|
|
|
|
| Small Hot Air Fan, A |
|
Senft, Dr. James R. | 1973 | Model Engineer, Vol 139, Oct 19 |
|
|
1017 |
|
|
|
| Small Stationary Stirling Engine Design |
|
Senft, Dr. James R. | 1982 | Inst. of Mechical Engineers., London | C19/82 Proc. Int. Conference on Stirling Engines |
|
pp. 77-84 | paper given at Univ. of Reading, March 82 |
|
|
| Small Stirling Air Engines |
|
Ross, Andrew | 1985 | IECEC 2nd Int. Conf. on Stirling Engines | 2-3 1985 June Shanghai |
|
|
|
|
|
| Small Stirling Cycle power source in Marine Applications |
|
Cooke-Yarborough, E.H. | 1980 | Proceedings OCEANS 80 Conf. Seattle |
|
|
457-462 |
|
|
|
| Small Stirling Dynamic Isotope Power System for Multi- | hundred watt Robotic mission | Bents, D.J. | 1991 | NASA Lewis Research Center | NTIS#N91251827 | NASATM-104460 | 16 |
|
|
|
| Small Stirling Dynamic Isotope Power System for Robotic | space Missions | Bent, D.J. | 1992 | NASA | NASA TM-105785 |
|
|
|
|
|
| Small Stirling Machines for Stationary Applications |
|
Johansson, L. | 1978 | Inst of Gas. Tech. Sem. Stirling Cycle Prime Mover |
|
|
|
Inst. of Gas Tech., Chicago |
|
|
| Smogless Stirling Engine Promises New versatility |
|
Chironis, N.P. | 1968 | Product Engineering Vol 39 No5 Feb 26, 1968 |
|
|
30-33 | General story discussing advantages of Stirling | engine; low emissions, efficiency, includes | diagrams and crossections of engine |
| SNAP Stirling Numerical Analysis program |
|
Schock,. A. | 1978 | DOE Report | NTIS |
|
|
|
|
|
| SNAP-DYN-Concepts for multikilowatt space power application | Paper |
|
1988 |
|
SAE#889241 |
|
|
|
|
|
| Sodium Heat Pipe Solar Receiver for a SPS V-160 Stirling | Engine:Development, laboratory and on sun test results | Laing, D.;Goebel,Olaf | 1991 | IECEC 26th Conf. Proc./DLR German Aerospace Res. | Inst. for Technical Thermodynamics |
|
363-369 |
|
|
|
| Solar Concentrator associated with the Stirling Engine |
|
Henderson, R.E.; Dresser, D.L. | 1960 | Amer. Rocket Soc.\Space Power Systems Corp. Sept |
|
|
|
Space power Systems Corp, Santa Monica, CA |
|
|
| Solar Isotope Power System Program. | Final Report Jan 78-Dec 80 |
|
1980 | General Electric Co., Phila, PA f/DOE | NTIS#DE85002494 | DOEET32002T1 | 293p | Dec 80 |
|
|
| Solar Parabolic Dish Stirling Engine System Module Project | Brochure escribing system |
|
0 | Advanco Corporation, El Segundo, CA | 1986? date |
|
|
|
|
|
| Solar Power and the Stirling Engine |
|
West, Colin D. | 1976 | Solar Energy Digest. Vol 4 March |
|
|
|
|
|
|
| Solar Power Stirling Cycle Electric Generator |
|
Shaltens, Richard K. | 1991 | NASA Lewis Research Center, Mar. 91 | NTIS#912305540 |
|
|
|
|
|
| Solar Powered Stirling Cycle Electrical Generator |
|
Shaltens, R.K. | 1990 | NASA\Technology Utilization Foundation | NASA Tech Brief Magazine |
|
|
Nov 27-28 1990 |
|
|
| Solar Powered Stirling Engine feeds electrical grid | Article(short note on United Stirling project in Sweden) |
|
1982 | High Technology Magazine | Sept/Oct issue 1982 |
|
pg. 102 | Short article on United Stirling engines with | generators at Georgia Tech project |
|
| Solar Research Liquid Piston Stirling Cycle Irrigation | Pump research Grant May 1, 1978-December 31,1978 | Bell, G.C | 1980 | Sandia Laboratories | SAN-1894/1 |
|
|
|
|
|
| Solar Ringbom-Stirling Engine, A |
|
Senft, Dr. James | 1986 | IECEC 21st Conf. Proc. Vol 1\Amer. Chem. Soc. Mtg | SAE#869112 |
|
495-500 |
|
|
|
| Solar Stirling Engine, 60 cycle AC from sunshine |
|
Linsay, E. F. | 1978 | Popular Science | June issue |
|
pp. 75-77 |
|
|
|
| Solar Stirling Receiver Alternatives for the Terrestrial | Solar Applications |
|
|
|
N86-28512/9 |
|
|
650863 |
|
|
| Solar Technology for down to earth use? Stirling | Cycle cooler | Ruby, Daniel | 1983 | Popular Science, V222 June 1983 |
|
|
pg. 80 |
|
|
|
| Solar Thermal Energy Receiver | Patent Application | Baker, K.W.;Dustin, M. | 1991 | NASA Lewis Research Center | NTIS#N91236174 | PATAPPL7676910 |
|
|
|
|
| Solar Thermal Program Summary. Vol 2 Research Summaries | Fiscal Year 1989 Progress Report | SERI, Golden, CO | 1990 | Solar Energy Research Institute,/DOE | NTIS#DE89009476 |
|
69 | Report from the National Solar Thermal Technology | Program since 1975. Report of progress and | projects |
| Solar Thermal Program Summary: Vol 1. Overview fiscal year | 1988 | SERI, Golden, CO | 1989 | Solar Energy Research Institute, for DOE | NTIS#DE90000860 |
|
22 | discusses 1988 developments and outlooks | DOECH1009345 |
|
| Solar Thermal Stirling Hydraulic Engine System.Final Report |
|
|
1988 | Stirling Technology Company f/DOE | DOE/NASA/0371-1 Jan 88 |
|
|
|
|
|
| Solar Vuilleumier System.,A |
|
Shelpuk, B. | 1974 | Workshop Proc. Solar Coolinga for Buildings | NSF-RA-N-74-063 Feb |
|
|
|
|
|
| Solar Water Pumps. 1970-May 1983(Citations from the | Engineering Data Base) |
|
1983 | NTIS | NTIS#PB83807032 |
|
175p | supercedes PB82806605 and PB81802720 |
|
|
| Solar-Stirling Small power System, A |
|
Pons, R.L. | 1979 | IECEC Record |
|
|
1131-1136 |
|
|
|
| Solid Fuel Applications to Transportation Engines |
|
|
1981 |
|
NTIS#DOE/CS/56051-T2 |
|
|
|
|
|
| Solid Fuel Combustion Technology for the Stirling Engine |
|
|
1981 |
|
NTIS#DOE/QQ/90430-T1 |
|
|
|
|
|
| Some aspects of the design of Stirling Cycle Machines |
|
Walker, Graham | 1961 | Ph.D. Thesis Durham Univ, UK |
|
|
|
|
|
|
| Some aspects on the design of reversed Stirling Cycle | Machines | Walker, Graham | 1965 | ASHRAE Summer Meeting Portland | ASHRAE Paper No. 231 |
|
|
|
|
|
| Some considerations in design of Stirling Engines |
|
Zarinchang, J. | 1975 | IECEC 10th Conf. Proc. |
|
|
948-53 | check reference |
|
|
| Some experimental investigations of parameter effects | in Ringbom-Stirling Engines |
|
1986 |
|
SAE#869103 |
|
|
|
|
|
| Some experimental results on laboratory model Fluidyne | Engines | Rallis, C.J., Goldber, Louis | 1977 | IECEC 13th Conf. Proceedings Washington, DC | SAE#779256 |
|
1528-1533 | Univ. of Witwatersand, SA |
|
|
| Some experiments with the Fluidyne |
|
Reader, G.T.;Clark, M.A.;Taylor, D.R. | 1982 | Institution of Mech. Engineers | C20/82 |
|
|
|
|
|
| Some of his works |
|
|
1881 | Engineering News, Oct 8, 1881 |
|
|
403-5 | Brief biography with description of some of John | Ericsson's inventions |
|
| Some problems using absorbants as a matrix matherial for low | temperature regenerators of cryogenic refrigerators | Pronko, V.G.;Ammamchyan, R.G.;Guliman, | 1976 |
|
|
|
|
|
|
|
| Some Single Piston Closed Cycle Machines and Peter Tailer's | Thermal lag Engine | West, Colin D. | 1993 | IECEC 28th Conf. Proceedings Vol. 2 | SAE#93105 |
|
2.673 | Oak Ridge National laboratory, FEDC Building, | MS-8218, POB 2090, Oak Ridge, TN, |
|
| Some Solar Dish/Heat Engine Design Considerations |
|
Alvis, R.L. | 1984 | Sandia Laboratories, Albuquerque NM f/DOE | NTIS#DE85003479 | SAND841698 | 17p | Nov 84 |
|
|
| Some special considerations on design of Stirling Engine |
|
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759142 |
|
|
|
|
|
| Some Stirling Points on Fitting Cylinder and Pistons |
|
Senft, James R. | 1979 | Live Steam, Sept 1979 |
|
|
pp. 14-15 | Discussion of criteria for fitting cylinder and | pistons, drawings and graphs |
|
| Some theoretical and practical aspects of the design of the | Stirling Cycle Engines | Organ, A.J. | 1973 | Proc. Stirling Engine Seminar Lecture series | No. 53 |
|
|
Von Karmen Inst. for Fluid Mechanics, Brussels | Feb 12-16 |
|
| SP-100 A Flexible Technology for Space power from 10s to | 100s of KWe |
|
1989 | IECEC 24th Conf. Proceedings |
|
89-2-1215 |
|
|
|
|
| SP-100 Advanced Radiator Designs for Thermo Electric and | Stirling Applications |
|
1989 | IECEC 24th Conf. Proc. |
|
89-2-1245 |
|
|
|
|
| SP-100 power system conceptual design for Lunar-Base | Applications | Mason,L.S.;Bloomfield, H.S. | 1989 | NASA Lewis Research Center |
|
|
22p | Conceptual design presented for a nuclear power | system utilizing a n SP-100 reactor and mulitiple | Stirling cycle engines for operation on the moon |
| SP-100 Technology |
|
|
1989 | IECEC 24th Conf. Proceedings |
|
89-1-81 |
|
|
|
|
| Space Demonstrator Engine | Phase I, Final Report | NASA | 1987 | NASA, May 1987 | CR-179555 |
|
|
|
|
|
| Space Power Demonstrator Engine, Phase 1 Final Report |
|
Mechanical Technology Inc | 1987 | Mechanical Technology Inc f/NASA |
|
NASACR-179555 |
|
|
|
|
| Space Power Free-Piston Scaling Study |
|
|
1989 | NASA Oct 89 |
|
NASACR-182218 |
|
|
|
|
| Space power Needs |
|
|
1989 | Popular Mechanics, February 1989 |
|
|
15 | Picture of lunar base and the NASA 25 kW Stirling | Engine demonstrator. |
|
| Space Reactors-past, present and future |
|
|
1982 |
|
SAE#829362 |
|
|
|
|
|
| Space technology for down to earth use, Stirling Cycle | Cooler | Ruby, Daniel | 1983 | Popular Science, June 83 |
|
|
78-80 |
|
|
|
| Space, automobile uses hasten development of Stirling Engine | Article |
|
1986 | Research and Development Vol 28 |
|
|
pg. 48 |
|
|
|
| Spacecraft Vuilleumier Cryogenic Refrigerator Development |
|
Pitcher, G.K.; duPre, F.K. | 1975 | Proc. Cryogenic Engineering Conf. June | AFFDL Report AFFDL-TR-75-114, W.P.A.F.B. OH Sept |
|
|
|
|
|
| Spaennings-och utmattningsanalys av cylinderhuvudet till | Stirlingmotrn SCP 1-75. Stress and fatigue analysis... |
|
1990 |
|
NTIS#DE90770865 |
|
|
047,656 | Stress and fatigue analysis of the Stirling | Engine SCP1-75 cylinder head |
| SPDE/SPRE Final Smmary Report |
|
Douchet, G. 1944- | 1991 | IECEC Proceedings 20th Conv. 1985 | NASA CR-187086 |
|
|
SAE p-164 | Microfische 94-0071-M | ODU CALL TJ163.7.157 1985 V 3 |
| Specific performance of Stirling Engines |
|
Finkelstein, Theodore | 1964 | Journal of Applied Thermal Processes |
|
|
|
also in Proc. 3rd Conf. on the performance of High | Temperature Systems, Pasadena Dec 1964 | Gordon & Breach Science Pub. Vol 2, pg 389-407 '69 |
| SPRE 1(Space Power Research Engine) Free Piston Stirling | Engine Testing at NASA Lewis Research Center | Cairelli, J.E. | 1987 | NASA Lewis Research Center, Cleveland, OH | NTIS#N88117478 | NASATM-100241 | 15p |
|
|
|
| SPRE-1 Free-Piston Stirling Engine Testing at NASA Lewis | Research Center | Cairelli, J.E. | 1988 | NASA Lewis Research Center, Cleveland OH |
|
TM-100241 |
|
|
|
|
| ST-5 and Total Energy Independence, The |
|
|
1990 | Stirling Technology Inc, Athens Ohio | Sales brochure |
|
7p | an overview of the ST-5 Hot Air Engine that is | produced and sold by this company. Large engine | ph 614-594-2277, 9 Factory St., Athens |
| Stability Analysis of a Free-Piston Stirling Engine Power | generation System | Fu, Z.X.;Nasar, S.A. | 1992 | IECEC 27th Conf. Proceedings, San Diego |
|
|
|
|
|
|
| Stability analysis of Free-Piston Stirling Engine power | generation system | Nasar, S.A.;Fu, Z.X.; Rosswurm, Mark | 1992 | IECEC 27th proceedings | SAE#929025 |
|
5.13-5.21 |
|
|
|
| Stability characteristics of Stirling Engines |
|
|
1985 |
|
SAE#859386 |
|
|
|
|
|
| Stairling Engine Availability criteria |
|
|
1984 | IECEC 18th Conf. Proc. |
|
|
791-795 |
|
|
|
| Standards and Nomenclature for Reporting Stirling Engine | Performance | Corey, J. | 1988 | IECEC 24th Conf. Proceedings, Vol 5 | SAE#899548 |
|
|
|
|
|
| Standarized Efficiency Terms: Comparison of some Stirling | Engine Performance figures | Crowley, J.L. | 1984 | Oak Ridge National Laboratories f/DOE | NTIS#DE84015407 | CONF84080431 | 7p | IECEC Conf. San Francisco 19 Aug 84 |
|
|
| State of a Stirling Engine powered heat activated Heat | Pump Developement | Van Edkelen, J.A.M. | 1979 | IECEC 14th Conf. Proc. record |
|
|
|
|
|
|
| Statistical Life-Testing of Stirling Engine Main Seals |
|
|
1983 | Proc. 21st Auto Tech Development | Contractors Coordination Meeting, Dearborn Nov 83 | 84ASE359TR29 | pg. 138 |
|
|
|
| Status of a thermocompressor-powered implantable Artificial | Heart System |
|
1974 | IECEC | SAE#749118 |
|
|
|
|
|
| Status of Free-Piston Stirling Engine/Linear Alternator | Power conversion system | Pillar, S.J. | 1978 | IECEC 13th Conf. Proceedings | SAE#789356 |
|
1872-1877 |
|
|
|
| Status of NASA's Stirling Space Power Converter program |
|
Dudenhoefer, J.E.; Winter, Jerry | 1991 | NASA | TM-104512 |
|
|
|
|
|
| Status of several Stirling loss characterization efforts and | their significance for Stirling Space Power Development | Tew, Roy C. | 1988 | IECEC 23rd Conf. Proc./NASA Lewis | SAE#889280 |
|
113-117 |
|
|
|
| Status of Stirling Machine design techniques |
|
Martini, W.R. | 1978 | Inst of Gas Tech Sem. Stirling Cycle Prime Movers |
|
|
|
Chicago, Ill. |
|
|
| Status of the Advanced Stirling Conversion System Project | for 25 KW Dish Stirling Applications | Shaltens, R.K.;Schreiber, Jeffery.G. | 1991 | IECEC 26th Conf. Proceedings/NASA Lewis | SAE#910838 | TM-104528 | 388-394 | August 1991 |
|
|
| Status of the Advanced Stirling Conversion System Project |
|
Shaltens, R.K. &Schreiber, J.G. | 1991 | SAE#910838 IECEC Proceedings vol.5 Aug 90 |
|
|
388-394 | August 91 |
|
|
| Status of the U.S.A.E.C.'s Nuclear Power Artificial Heart |
|
Cole, D.W.; Holeman, W.S. | 1973 | Trans. Soc. Artif Int. Organs, Vol 19 |
|
|
537 |
|
|
|
| Steady flow examination of a Cryocooler |
|
|
1982 |
|
SAE#829307 check number |
|
|
|
|
|
| Steady State Analysis of Free Piston Stirling Engine | Dynamics | Rauch, J.S. | 1975 | IECEC 10th Conf. Proc. Newark, NJ Aug 17-22 |
|
|
961-965 |
|
|
|
| Steady state analysis of Free-Piston Stirling Engine dynamic |
|
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759144 |
|
|
|
|
|
| Steam and Stirling, Engines you can build | Book | Fitt, William C. | 0 | Wildwood Publications, Traverse City MI | Price 24.95 |
|
160 pages | Book contains chapters on building hot air engines | as well as several steam engines, same people that | publish Live Steam |
| Steam Engine and other Heat Engines, The |
|
Ewing, J.A. | 1910 | Cambridge University Press 1910 |
|
|
|
|
|
|
| Stirlec 1, Stirling Electric Hybrid Car |
|
Agarwal, P. D.; Mooney, R.J.; Toepel, R. | 1969 | SAE | SAE#6900/74 |
|
|
|
|
|
| Stirling Engine patents(1849-1930) U.S. Patent Office |
|
Phillips, Alan G. | 1984 | A.G. Phillips, Orlando FL |
|
|
|
UMS call TJ765.p44 1984 UMCP |
|
|
| Stirling "Steam" Engines |
|
Calder, G.H. | 1991 | IECEC Conf. Proceedings\Calder Engineering |
|
|
2p | Description of an extension of the Fluidyne to | use several loops. Calder Engineering | c\o 195 W. 1200 N., Mapleton, UT, 84664 |
| Stirling analysis code validation using Free-Piston Engine | base line data |
|
1983 |
|
SAE#839362 |
|
|
|
|
|
| Stirling Analysis of an adiabatic Stirling Cryocooler using | a two phase two-component working fluid | Renfroe, David A.;Cheung, Che Man | 1992 | IECEC 27th Proceedings\Univ. of Arkansas | SAE#929175 |
|
5.173-5.183 |
|
|
|
| Stirling and Vuilleumier Heat Pumps, design and applications |
|
Wurm, Jaroslav.;Kinast, J.; Roose, T. | 1991 | McGraw Hill, NY |
|
|
256 p. | illu;strated |
|
|
| Stirling bottoming cycle for the gas turbine exhaust | streams of pipeline compressors | Kremer, J,; Walker, G,;Fauvel, R. | 1992 | IECEC 27th Proceedings\Univ of Calgary | SAE#929393 |
|
5.431-5.435 |
|
|
|
| Stirling Cryocooler Test Results and Design Model | Verification | Shimko, Martin A.; Stacy, D.;McCormick,J | 1991 | IECEC 26th Conf. Proc |
|
|
292- |
|
|
|
| Stirling Cryocoolers: Trends in development |
|
|
1986 |
|
SAE#869102 |
|
|
|
|
|
| Stirling Cryogenerators with Linear Drive |
|
Stolfi, F.; de Jonge, A.K. | 1985 | Philips Technical Review vol 42 No.1 |
|
|
1-10 |
|
|
|
| Stirling Cycle 400 W(e) economical radioisotope generator |
|
Holman, R.R.; Jaspers, H.A. | 1974 | Proc. Am. Nuclear Society, Annual Mtg. Phila.,PA |
|
|
|
|
|
|
| Stirling Cycle Advanced Heat Pumps |
|
|
1978 | Inst Gas Tech Seminar Stirling Cycle Prime Movers |
|
|
|
Chicago, Ill |
|
|
| Stirling Cycle and Cryogenic Refrigerators, The |
|
Louis, Beverly; Radebaugh, Ray | 1984 | IECEC /National Bureau of Standards, Boulder, CO | SAE#849414 |
|
2086-2091 | PB86-122926 609719 |
|
|
| Stirling Cycle applied to water pump |
|
|
1976 | Solar Energy Digest, vol 8 Sept |
|
|
|
|
|
|
| Stirling Cycle as a Linear Wave Phenomenon, The |
|
Organ, A.J. | 1989 | Proc. Institution of Mech. Engineers vol 203 |
|
|
301-309 |
|
|
|
| Stirling Cycle Cooling Engine |
|
Walker, Graham | 1974 | Cryogenics, Vol 14 |
|
|
458-462 |
|
|
|
| Stirling Cycle energy converter to power circulatory support | systems | Martini, W.R. | 1968 | MDAC Annual Report | DAC-60763 |
|
|
|
|
|
| Stirling Cycle Engine |
|
Zanzig, J. | 1963 | SAE Paper Meeting Sept 9-12, 1963 | SAE#733B |
|
4 | History of engine, its theory and cycle |
|
|
| Stirling Cycle Engine |
|
van Witteveen, R.A. | 1971 | Tech Report Conf. on Low Pollution Power Systems |
|
|
|
held in Eindhoven, Neth | February |
|
| Stirling Cycle Engine Analysis |
|
Urieli, Israel; Berchowitz, D.M. | 1984 | Adam Hilger Ltd, Redcliffe way, Bristol BS1 6NX | ISBN 0-85274-435-8 |
|
|
|
|
|
| Stirling Cycle Engine Design and Optimisation |
|
Berchowitz, David M. | 1986 | University of the Witwatersrand S.Africa | PH.D Thesis Aug 1986 |
|
|
|
|
|
| Stirling Cycle Engine promises low emissons without | add ons. | Norbye, Jan. P;Dunne, Jim | 1973 | Popular Science, Feb. 1973 |
|
|
pp. 72-75 | short magazine article on Stirling engines for | automotive use at Phillips. Photo of R.J. Meijer |
|
| Stirling Cycle Engine runs on 15F differential | Article |
|
1984 | Design News, Vol 40 April 9, 1984 |
|
|
pg. 36 |
|
|
|
| Stirling Cycle Engine, parts I and II, A |
|
Henshall, J. | 1977 | Model Engineer, Vol 142, 143 |
|
|
1259-1265,25-27 | this two part article begins in 1976 and completes | Jan 7, 1977 issue |
|
| Stirling Cycle Engine-development-A Review |
|
Urieli, I. | 1975 | Univ. of Witwatersrand, Dept Mech Eng. | Report No. 61 |
|
|
|
|
|
| Stirling Cycle Engines |
|
Percival, W.H. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept 12-17 |
|
|
1496-1497 |
|
|
|
| Stirling Cycle Engines |
|
Walker, Graham | 1958 | Journal of the Stephenson Soc., Newcastle, V2 No 2 |
|
|
|
|
|
|
| Stirling cycle Engines for total energy systems. |
|
Walker, Graham | 1967 | Inst. of Gas Technology, Chicago, IL |
|
|
|
|
|
|
| Stirling Cycle Engines-definition and thermodynamic | fundamentals | Finkelstein, Theodore | 1978 | Inst of Gas Technology Seminar June |
|
|
|
Seminar on Stirling Cycle Prime Movers, Chicago,IL |
|
|
| Stirling Cycle Gas Regenerative Machines |
|
Reader, Graham T. | 1978 | Journal of Naval Science |
|
|
82-88 |
|
|
|
| Stirling Cycle Hot Air Engine |
|
Ricardo, H. Sir | 1966 | Engineer, London, Vol 221 April 8 |
|
|
|
|
|
|
| Stirling Cycle in climate control systems, The |
|
Hermans, M.L.; Asselmann, G.A.A. | 1978 | IECEC 13th Conf. Proc, San Diego, CA Aug 20-25 |
|
|
|
|
|
|
| Stirling Cycle in dissociating gas |
|
Kovtun, I.M.; Naumov, A.N. | 1967 | International Chemical Engineer, v7 n4 Oct 1967 |
|
|
608-10 | Use of disociating gas in Stirling cycle should | lead to increase in cycle efficiency; result of in | crease of gas constant during takeup and expansion |
| Stirling Cycle in dissociating gas |
|
Kovton, I.M.; Naumov, A.M. | 1967 | Int. Chem. Eng. Vol 7 |
|
|
608-610 |
|
|
|
| Stirling Cycle Liquid Piston Engines | with no moving parts | Scott, David | 1975 | Popular Science, January 1975 |
|
|
pp. 71-73 | Story on how a Fluidyne engine works, easy reading |
|
|
| Stirling Cycle Machines for power generation |
|
Reader, Graham T. | 1981 | Institution of Engineers Conf. Canberra, Australia | paper 215 |
|
|
Given at the conference "Engineering in 1981" |
|
|
| Stirling Cycle Plant Demonstrator |
|
Rauch, J.S. | 1978 | IECEC 13th Conf. Proc. San Diego, CA Aug. 20-25 |
|
|
|
|
|
|
| Stirling Cycle Regenerator thermal machine as a low | pollution prime mover | Organ, A.J. | 1971 | 2nd Brazilian Symp. on Heat Tranfer and Fluid Mech | Univ. Fed.de Minar Gerais, Beb Horiteute, Brazil |
|
|
|
|
|
| Stirling Cycle with Adiabatic Compression and expansion. The |
|
Lee, K. | 1976 | Univ. of Calgary, M. Sc Thesis |
|
|
|
|
|
|
| Stirling Cycle with Nuclear fuel |
|
Kolin, Ivo | 1968 | Nuclear Engineer International v13 n151 Dec 68 |
|
|
1028-34 | Discusses the way nuclear fuel heat would be | used to power a Stirling engine; in more suitable | case for nuclear power stations |
| Stirling Cycle with nuclear fuel., The |
|
Kolin, Ivo | 1968 | Nuclear Eng. Vol 13 |
|
|
1027-1034 |
|
|
|
| Stirling Cycles Back; high technology is bringing the | stirling Engine off the shelf and this time it may catch on | Reymond, Jeff | 1985 | Popular Mechanics June 85 v162 |
|
|
pp. 143-150 |
|
|
|
| Stirling Design Manual |
|
Martini, William R. | 1980 | Martini Engineering |
|
|
359 | 1980 is 1st edition, 1983 2nd Edition for computer | applications.(410 pages) |
|
| Stirling Development |
|
|
1978 | Mechanical Engineer July 78 |
|
|
|
|
|
|
| Stirling Engine Air Force Applications |
|
Griethuysen, Valarie J. | 1984 | Wright Patterson Aeronautical Lab, | SAE#849114 duplicate number |
|
1913-1916 |
|
|
|
| Stirling Engine Alternatives for the Terrestrial Solar | Application | Sterns, J. | 1985 | Jet Propulsion Laboratory, Pasadena, CA | DOE/JPL-1060-91 Oct 1985 |
|
|
N86-16725/1 |
|
|
| Stirling Engine analysis insights derived from sixteen | years of Artificial Heart power source developement | Riggle, P., White, M.A. | 1983 | IECEC 18th Proceedings, Univ. of Washington |
|
|
|
Univ of Washington at Richland |
|
|
| Stirling Engine analysis insights derived from sixteen years | of arificial heart power source development |
|
1983 | IECEC | SAE#839124 |
|
|
|
|
|
| Stirling Engine analysis method based upon moving gas nodes |
|
|
1986 |
|
SAE#869124 |
|
|
|
|
|
| Stirling Engine and its Future, The |
|
Dunn, P.D. | 1974 | The Inventor, vol 14, No. 1. March 74 |
|
|
|
|
|
|
| Stirling Engine application for Rail Traction-a British | viewpoint |
|
1982 |
|
SAE#829284 check number |
|
|
|
|
|
| Stirling Engine Application Study |
|
Teagan, W.P.; Cunningham, D.R. | 1983 | Arthur D. Little Inc., Cambridge MA f/DOE | NTIS#DE84002197 | NASACR-168087 | 252p | Mar 83 | N83-22029/3 |
|
| Stirling Engine Application Study. Final Report |
|
Teagan, W.P.; Cunningham, D. | 1983 | Arthur D. Little Inc., Cambridge MA f/NASA | NTIS#N83220295 | NASACR-168087 | 261p | DOENASA02541 |
|
|
| Stirling Engine Application Study. Final Report Jan-Dec 82 |
|
Hanson, K.L.;Eckard, S.E. | 1983 | General Electric Co., King of Prussia PA | NTIS#PB84148055 | GE82AEP022 | 236P | Aug 83 | GRI810133 |
|
| Stirling Engine Approach to an implantable nuclear assist | system | Feigenbutz,L.V.;Griffith, W.R. | 1973 | IECEC 8th Conf. Proc. Phila, PA Aug 13-17 |
|
|
441-448 |
|
|
|
| Stirling Engine as a total energy system prime mover |
|
Daniels, A. | 1974 | Philips Labs, Briar Cliff Manor, NY |
|
|
|
|
|
|
| Stirling Engine availability criteria |
|
Rice, G. | 1983 | IECEC 18th Proceedings\Univ. of Reading | SAE#839128 |
|
791- |
|
|
|
| Stirling Engine available tools for long life assessment |
|
Halford, G.R.; Bartolotta, P.A. | 1991 | NASA Lewis Research Center | NTIS#N91129809 | NASATM-103660 | 7 |
|
|
|
| Stirling Engine beats pollution |
|
Organ, A.J. | 1973 | Design Engineering(London) May 1973 |
|
|
43-46 | Organ of A.J. Glenallan Engineering and Develop- | ment Co. discusses the Stirling engine and on | going development |
| Stirling Engine beats pollution's threat |
|
Organ, A.J. | 1973 | Design Engineering May |
|
|
43-46 |
|
|
|
| Stirling Engine Coach at Brussels |
|
Wilding, T. | 1971 | Commercial Motor, Jan 22 |
|
|
|
|
|
|
| Stirling Engine Combustion and Heat Transport System design | alternatives for stationary power generation |
|
1979 |
|
SAE#799243 |
|
|
|
|
|
| Stirling Engine comes full cycle |
|
Wyman, Vic | 1991 | The Engineer (London) August vol 273 |
|
|
22-23 | illustrated |
|
|
| Stirling Engine Competition |
|
Chaddock, D.H. | 1977 | Model Engineer 20 May 1977 |
|
|
pp. 560-566 | Story on Hot Air Engine competition that drew | many contenders and the engines they built. | Photographs and diagrams |
| Stirling Engine Computer Model for Performance Calculations | A | Tew, R.; Jefferies, K.; Miao, D | 1978 | NASA for DOE July 78 | DOE/NASA/1011-78/24 | NASATM-788834 |
|
|
|
|
| Stirling Engine Conference |
|
Organ, A. J.; Rix, D. | 1982 | Inst. Mech. Engineers, London |
|
|
|
|
|
|
| Stirling Engine coupled with a sodium boiler |
|
Alleau, T.; Bricard, A. | 1987 | 6th IHPC |
|
|
594-597 |
|
|
|
| Stirling Engine Demonstrator |
|
Spence, R.D.;Foiles, C.L. | 1982 | Physics Teacher, January 1982 |
|
|
38-39 |
|
|
|
| Stirling Engine Design Analysis Manual |
|
Martini, W.R. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy MI |
|
|
|
|
|
|
| Stirling Engine design and feasibility for automotive use |
|
Collie, M.J. | 1979 | Noyes Data Corp. Park Ridge NJ |
|
|
470 | also Energy Technology Review, No. 47 |
|
|
| Stirling Engine Design Manual |
|
Martini, William R. | 1978 | NASA/Martini Engineering/NTIS | NTIS#N78-23999 | NASACR-135382 |
|
2nd ed. 1983 NTIS#DE83015181XSP, Jan 83, 411 pgs | NASACR168088, Martini Engineering for DOE | N83-30328/9 |
| Stirling Engine Design Studies of an Underwater Power | System and a total energy system | Jaspers, A.;DuPre,F.K. | 1973 | IECEC 8th Conf. Proc. Phila.,PA Aug 13-17 | SAE#739035 |
|
588-593 |
|
|
|
| Stirling Engine development continues |
|
Scott, David | 1971 | Auto. Industry, July |
|
|
22-23 |
|
|
|
| Stirling Engine development for Space power |
|
Parker, M.D.; Smith, L.C. | 1960 | Space Power Systems Conference, Santa Monica CA | ARS Paper 1315-60 |
|
|
Conference held in Sept, |
|
|
| Stirling Engine Development Programs at the Stirling Engine | Systems Division of Mechanical Technology Inc. | Cosmus, T.C. | 1986 | 3rd Int. Stirling Engine Conf. Rome June 25-27 | ISEC 86-1-45 |
|
|
|
|
|
| Stirling Engine Development, State of the Art, Possible | Engine Applications and suitability...Final Report Oct 83 | Beschorner, F.; Grossman, J.(in German) | 1983 | Maschinenfabrik Augsburg-Nuernberg A.G. Munich | NTIS#N85141497 | PC A10/MF A01 | 214p | Stirling Engine Development, State of the Art, | possible engine applications and suitability in | comparison to established plants and systems. FR |
| Stirling Engine Electric Hybrid Vehicle Propulsion System | Conceptual Design | Dochat, George R. | 1978 | Mechanical Technologies Inc. Report | MTI78TR129 August 1978 |
|
|
|
|
|
| Stirling Engine feasibiltiy study of an 80-100 HP engine and | of improvement potential for emissions and fuel economy | Kitzner, E.W. | 1977 | NASA/DOE Report | COO/2631-22 |
|
|
available from NTIS |
|
|
| Stirling Engine for Naval Applications, The |
|
Percival, W.H. | 1967 | Proc. Conference on Energy Sources, Washington DC | NRC/CUW, 0340 |
|
196-209 |
|
|
|
| Stirling Engine for Passenger Car Application, The |
|
Van Giessel, R. Reinink, F.;Postma, N.P. | 1973 | SAE meeting June 1973 | SAE#730648 |
|
24p | Discussion of design criteria for Stirling auto- | motive use |
|
| Stirling Engine for Passenger Cars; modern developments and | potential future applications | van Beukering, H.C.J. | 1975 | 21st Conf. on Powerplants and Future Fuels, | Inst. of Mech. Engineers Jan 75 |
|
|
|
|
|
| Stirling Engine for space power. the |
|
Welsh, H.W.; Monson, D.S. | 1962 | SAE\Nat. Aero. Eng. and Manuf. Mtg. Los Angeles | SAE#594C |
|
|
|
|
|
| Stirling Engine for Underwater Vehicle Applications |
|
Mattavi, J.N.;Heffner, F.E.;Miklow, A.A. | 1969 | General Motors Research report GMR-936 | SAE#690731 |
|
2376-2400 |
|
|
|
| Stirling Engine for vehicle propulsion |
|
Kuhlman, P. | 1974 | VDI-Berichte |
|
|
|
|
|
|
| Stirling Engine Heat Actuated Heat Pump |
|
Ackermann, R.A.;English, J.D. | 1983 | Mechanical Technology Inc, f/DOE | NTIS#DE83017137 | CONF83081243 | 6p |
|
|
|
| Stirling Engine Heat-Actuated Heat Pump |
|
|
1983 | SAE | SAE#839300 |
|
|
|
|
|
| Stirling Engine in every car |
|
|
1989 | Machine Design | Feb. 9th issue, MTI |
|
pg. 12 |
|
|
|
| Stirling Engine is a hot contender for car power plants |
|
Carrett, K | 1975 | Engineer, London Vol 240, March |
|
|
|
|
|
|
| Stirling Engine Losses in Dead Volume Between Components |
|
Romm, Micheal J.;Smith, Joseph L. | 1993 | IECEC 28th Conf. Proceedings | SAE#93332 |
|
2.751 | Smith-Cryogenic Eng. Lab. MIT |
|
|
| Stirling Engine makes a comeback | Article(describes SAGA submarine, United Stirling project) |
|
1988 | Offshore V48 April 1988 |
|
|
58 | Story on the French submarine powered by Stirling | engines |
|
| Stirling Engine Modeling on Eulerian Grids |
|
Bauwens, Luc | 1993 | IECEC 28th Conf. Proceedings | SAE#93511 |
|
2.725 | Bauwens, Univ. of Calgary, Mech Eng. Depart. | Calgary |
|
| Stirling Engine Modeling: the MS*2 Code |
|
Bauwens, L. | 1993 | 6th Int. Stirling Engine Conf. Eindhoven, May 93 |
|
|
|
|
|
|
| Stirling Engine module to power circulatory assist devices |
|
Martini, W.R. | 1968 | ASME Paper | No. 68-WA/Ener-2 |
|
|
|
|
|
| Stirling Engine Natural Gas Combustion Demonstration: | Final Report Oct 1989-JAN 1991 | Ernst, W.; Moryl, J.; | 1991 | Mech. Tech. Inc, f/Gas Research Inst Feb 91 | NTIS#PB92108802/MTI91TR16 | GRI910062 | 70 |
|
|
|
| Stirling Engine News Letter(Quarterly) |
|
Martini, W.R. | 1978 | Martini Engineering |
|
|
|
Publication originally started by Martini and now | is published by Brad Ross |
|
| Stirling Engine Nodal Analysis Program |
|
Schock, A. | 1978 | Fairchild Space and Elect. Corp. Germantown PA | FESC-ESD-217-78/127 |
|
|
|
|
|
| Stirling Engine optimization using dimensionless Schmidt | Model | Abenavoli, R.I.;Carlini, M.;Rudzinska,H. | 1991 | IECEC 26th Conf. Proc. /Univ. Rome/Univ. Gdansk |
|
|
308-311 |
|
|
|
| Stirling Engine Patents: International Patent Inventory |
|
Newmann, B.K. | 1983 | Oak Ridge National Laboratory f/DOE | NTIS#DE84002378 | ORNLCON119 | 181p |
|
|
|
| Stirling Engine Perfomance Calculations |
|
University of Georgia, Athens, |
|
NASA Computer Software Tech. Transfer Ctr, Cosmic | LEW-14092, |
|
|
|
|
|
| Stirling Engine Performance Optimization with different | Working fluids |
|
1987 |
|
SAE#869122 NTIS#DE87001759 |
|
|
717,796 |
|
|
| Stirling Engine piezoelectric (STEPZ) power system |
|
White, M.A.; Martini, W.R. | 1972 | 25th Power Sources Symp. May. | MDAC Paper WD 1897 |
|
|
|
|
|
| Stirling Engine power and transmission |
|
Organ, A.J. | 1970 | Journal of Auto. Eng., July |
|
|
9-16 |
|
|
|
| Stirling Engine Power Supplies for Remote Unattended Sites |
|
Walker, Graham | 1973 | IECEC 8th Conf. Proc. Phila, PA | SAE#739037 |
|
594-600 |
|
|
|
| Stirling Engine power system development and test results |
|
Williams, D., Lerfeld d., Richards C. | 1980 | IECEC\ Philips Labs | SAE#809398 |
|
|
1967 note also |
|
|
| Stirling Engine powers underwater vehicles |
|
|
1991 | Offshore(Tulsa OK) | v51 |
|
76+ |
|
|
|
| Stirling Engine Program |
|
|
1976 | Ford Powertrain Research Office, 1976 |
|
|
|
Ford Powertrain Research Office, Energy Research a | and Development Administration, Inst. of Mech. | Engineers, Oct. 1976 |
| Stirling Engine Progress |
|
Ross, A. | 1985 | Model Engineer, Vol 155, No 3760 Sept 6 |
|
|
250-254 | Describes B-60 and C-60 Engine |
|
|
| Stirling Engine Progress Report-Smoke, Odor, Noise and | Exhaust Emissions | Lienesch, John H.;Wade, Wallace R. | 1968 | SAE paper Progress in Technolgy/GMRL, Warren, MI | SAE#680081 |
|
21p | Efforts at General Motors Research Laboratories | uncovered desireable attributes of Stirling | engines, such as low emissions levels; |
| Stirling Engine Project Status-1977 |
|
Ragsdale, R.G. | 1977 | Proc ERDA Adv. Auto Power Syst. Cont. Coord Mtg |
|
|
|
Oct meeting, Dearborn, MI, NTIS |
|
|
| Stirling Engine Project Status-1978 |
|
Ragdale, R.G. | 1978 | DOE Hwy Veh. Syst. Cont. Coord. Mtg, Troy, MI May |
|
|
|
|
|
|
| Stirling Engine readied for submarine support | Article |
|
1986 | Offshore Magazine V46 April 86issue |
|
|
pg. 70 | story on Swedish work on 50-100 KW range engine | for COMEX SAGA1 submarine |
|
| Stirling Engine ready for subsea deployment | Article |
|
1985 | Offshore, V45 May 1985 issue |
|
|
pp. 275-276 | Story on the French research submarine powered by | Stirling engines(photographs) |
|
| Stirling Engine Research and Development in Japan |
|
|
1985 |
|
SAE#859020 |
|
|
Overview of work going on in Japan at present |
|
|
| Stirling Engine Research at Argonne National Laboratory |
|
|
1986 |
|
NTIS#DE86014556 |
|
|
715,721 |
|
|
| Stirling Engine Research at National and University | Laboratories in Japan |
|
1988 |
|
NTIS#DE87014622 |
|
|
803,981 |
|
|
| Stirling Engine Research in the USA |
|
Reader, G.T.;Hooper, C. | 1978 | Inst. of Mechical Engineers |
|
|
|
|
|
|
| Stirling Engine solution to U.S. Auto dilemma |
|
|
1976 | Iron Age Nov 76 |
|
|
|
|
|
|
| Stirling Engine Supporting Research and Technology |
|
|
|
|
NE86-14106/6 |
|
|
|
06-612976NTIS |
|
| Stirling Engine Technologies in Japan. Proceedings of the | Int. Symp. on the Stirling Engine and applic. to Heat Pumps | (written in Japanese) | 1988 | Heat Pump Center of Japan, Int Conf. 1-2 Dec 86 | NTIS#DE89782296 |
|
313p | Tokyo 1-2 Dec 1986 Proceeding of Int. symp. on the | Stirling Engine and its application to heat pump | systems etc. |
| Stirling Engine Test Program at the Lewis Research Center |
|
Tomazic, W. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy, MI May |
|
|
|
|
|
|
| Stirling Engine Thermodynamic Analysis: A User Guide to | SEAM1 | Heames, T.J.; Uherka, D.J.;Daley, J.G. | 1982 | Argonne National Laboratory f/DOE | NTIS#DE83011919 | ANL8259 | 158p | Sept 82 |
|
|
| Stirling Engine thermodynamic design-the missing link |
|
Organ, A.J.;Finkelstein, T. | 1993 | IECEC 28th Conference Proceedings | SAE#93492 |
|
2.719 | Organ at Univ. eng. Depart, Univ of Cambridge | Finklestein Stirling Assoc., Box 643, Beverly | Hills CA 90213 |
| Stirling engine thermodynamic design-without the computer |
|
Organ, A.J. | 1992 |
|
|
|
|
|
|
|
| Stirling Engine to power circulatory assist devices |
|
Martini, W.R.;Johnston, R.P.;White, M.A. | 1968 | IECEC 3rd Conf. Proc. Boulder, CO |
|
|
733 | includes, Goranson. R.B. |
|
|
| Stirling Engine Total Energy System development in | Residential/Commercial applications by 2000 |
|
1979 | Resource Planning Associates Inc., Wash DC f/DOE | NTIS#DE84012776 | DOECS40117T4 | 101p | 26 Mar 79 |
|
|
| Stirling Engine Vehicle Engines |
|
Rice, G.; Janota, M.S. | 1974 | Peter Peregrinus Ltd, 74 |
|
|
|
|
|
|
| Stirling Engine versus Steam Engine for rural energy | conversion | Rice, Graham | 1984 | Reading University, Reading, Berks, UK | SAE#849186 |
|
|
|
|
|
| Stirling Engine with air as the working fluid, The |
|
Reader, G.T.;Clark, M.A.;Taylor, D.R. | 1982 | Institution of Mechanical Engineers | C21/82 |
|
|
|
|
|
| Stirling Engine with hydraulic power output for powering | artifical hearts | Johnston, R.P. Noble, J.E. | 1975 | IECEC 10th Conf. Proc, Newark, NJ Aug 17-22 | SAE#759212 |
|
1448-1455 |
|
|
|
| Stirling Engine with Unconventional Heating System |
|
Lia, T.A.; Lagerqvist, R.S. | 1973 | IECEC 8th Conf. Proc. Phila. PA | SAE#730073 |
|
165-173 |
|
|
|
| Stirling Engine Work |
|
Ross, Andrew | 1983 | Live Steam January 1983 |
|
|
pp. 10-16 | Summary of the early work done by Andrew Ross in | exploring Stirling Engine design in Low pressure | engines |
| Stirling Engine work in the Royal Navy |
|
Reader, Graham T. | 1986 |
|
SAE#860981 |
|
|
|
|
|
| Stirling Engine, 173 years old and running, The |
|
Crane, H.R. | 1990 | Physics Teacher, April 1990 |
|
|
252-253 |
|
|
|
| Stirling Engine, a promising power source for communications | equipment | Daniels, A. | 1974 | Philips Labs, Briar Cliff Manor, NY |
|
|
|
|
|
|
| Stirling Engine, can money make it work? | Article | Aronson, Robert B. | 1980 | Machine Design Magazine, April 24, 1984 |
|
|
pp. 20-27 |
|
|
|
| Stirling Engine, present and future |
|
van Waitteveen, R.A. | 1966 | UKAEA/ENEA symp on Indust. appl. for Isotopes |
|
|
|
Symp on Industrial application for Isotopic power | generators | Harwell, Eng, Sept |
| Stirling Engine, The |
|
Walker, Graham | 1973 | Scientific American, Aug. 1973 |
|
|
pp. 80-86 |
|
|
|
| Stirling Engine, The |
|
|
1970 | United Stirling 23 Oct 1970 |
|
|
15p |
|
|
|
| Stirling Engine, The |
|
Lia, T.A. | 1973 | Combustion Engine Progress, |
|
|
44-47 |
|
|
|
| Stirling Engine. Bibliography, The |
|
Zarinchang V. | 1972 | Intermediate Technology Development Group London |
|
|
|
|
|
|
| Stirling Engine: Available tools for long life assessment |
|
Halford, G.R.;Bartolla, P.A. | 1991 | NASA | TM-103660 |
|
|
|
|
|
| Stirling Engine: Bench Scale Experiments(Italy) |
|
|
1989 |
|
NTIS#89761950 |
|
|
002,838 |
|
|
| Stirling Engine: Engineering consideration in view of future | need., The | Pedroso, R.I. | 1976 | IECEC 11th Conf. Proc. |
|
|
1498-1505 |
|
|
|
| Stirling Engine: solution to the U.S. auto dilemma? |
|
Weimer, G.A. | 1976 | Iron Age, Nov 22 |
|
|
|
|
|
|
| Stirling Engine: The potentialities and prospects | (Russian) | Gonnov, V.; Loktionov, Y.V. | 1990 | Obninsk, Atomic Power Inst. Proc. |
|
|
156-165 |
|
|
|
| Stirling Engine: the potentialities and prospects |
|
Gonnov, I.V. | 1990 | Inst. of Nuclear Power Engineering |
|
|
156-165 |
|
|
|
| Stirling Engine-a new lease on life |
|
|
1969 | Mech. Engineering July |
|
|
52 |
|
|
|
| Stirling Engine-A new prime mover., The |
|
Kuhlman, P.; Horst, Z. | 1970 | MAN Research Eng. Manuf.,Sept. |
|
|
56-60 |
|
|
|
| Stirling Engine-a suitable case for study, The |
|
Reader, Graham T.; | 1978 | IJMEE vol 6, |
|
|
143-147 |
|
|
|
| Stirling Engine-Approach for long term durability assessment |
|
Bartolotta, Paul; Halford, Gary;Freed, A | 1992 | IECEC 27th Proceedings\Sverdrup Technology\NASA | SAE#929179 |
|
5.209-5.214 |
|
|
|
| Stirling Engine-Driven Heat Pump Program Overview |
|
Chen, Fang; | 1985 | DOE conf on Heat Pumps\Oak Ridge Laboratory f\DOE |
|
|
155-160 |
|
|
|
| Stirling Engine-History and current development of another | possible alternative to the internal combustion engine | Ludvigsen, K. | 1973 | Road and Track, Vol 24 No. 7, Mar |
|
|
83 |
|
|
|
| Stirling Engine-isotope power source |
|
|
1968 | Isotope and Radiation Technology vol 6 |
|
|
|
|
|
|
| Stirling Engine-its design and prospects |
|
Reader, G.T.;Clark, M.A.;Taylor, D.R. | 1982 | 2nd Interpolytecnic Conf. on Thermodynamics | Paper 14 |
|
|
|
|
|
| Stirling Engines |
|
Graham Walker | 1980 | Oxford University Press |
|
|
|
Primary reference technical book on the subject | with photographs and drawings. | First edition 1973 |
| Stirling Engines |
|
Andrew Ross | 1977 | Solar Engines, Phoenix, AZ |
|
|
122p | This is the most sold book on Stirling engines, | some 100,000 copies sold, light discussion on the | subject with photographs |
| Stirling Engines |
|
Reader, Graham T.;Hooper, Charles | 1983 | E.& F. N. Spon Co., London & NY 1983 |
|
|
|
Primary reference on the subject |
|
|
| Stirling Engines |
|
Walker, Graham | 1973 | Proc. 2nd Nat. Tech. Conf. Canadian Gas Assn Oct. |
|
|
|
|
|
|
| Stirling Engines activities at United Stirling(Sweden). |
|
Ortegren, L.G. | 1971 | Conf. on Low Pollution Power Systems Development |
|
|
|
Conf. in Eindoven, Netherlands | Technical report |
|
| Stirling Engines and Irrigation Pumping |
|
|
1988 |
|
NTIS#DE88000020 |
|
|
806,057 |
|
|
| Stirling Engines at Sunpower Incorporated, A Progress Report |
|
Beale. William T. | 1982 | University of Reading, England | Inst. of Mech. Eng. Conf. on Stirling Engines. | C23/82 March | 11p | Discussion of projects and results of work at | Sunpower, Inc. | paper given at Univ. of reading |
| Stirling Engines August 1977-May 1980(Citations from the | Energy Data Base) |
|
0 | NTIS | PB80-851710 |
|
|
|
|
|
| Stirling Engines for Automobiles |
|
|
1980 | NASA | DOE/NASA/1040-79/7 |
|
|
|
|
|
| Stirling Engines for developing countries |
|
Beale, W.T.;Wood, J.G.;Chagnot,B.J. | 1980 | IECEC 15th Conf. Proceedings | SAE#809399 |
|
|
Aug 80 |
|
|
| Stirling Engines for Irrigation Pumping | (f/Oak Ridge) | West, Colin D. | 1988 | Int. Conference on Stirling Engines, Tokyo 7 No 8 | NTIS#DE88016359 | 10p 1988 |
|
|
|
|
| Stirling Engines for Isotope Power Systems |
|
Walker, Graham | 1972 | Proc. 2nd Int Sym p. of Power from Radioisotopes |
|
|
467-493 | Madrid |
|
|
| Stirling Engines for power generation |
|
Walker, Graham | 1981 | Proc. of the 1981 Inst of Engrs. Austrailia Conf. | Paper 26 |
|
|
|
|
|
| Stirling Engines for Rural Electrification |
|
Yozui, S. | 0 | 4th Int Conference on Stirling Engines, Tokyo | Paper No. 075 |
|
|
|
|
|
| Stirling Engines for Solar Generation in the 50-500 kW | range | Well, D., et al. | 1982 | IECEC 17th Conf. Proceedings, Vol 4 IEEE 1982 | SAE#829290 |
|
pp. 1749-1754 |
|
|
|
| Stirling Engines for Undersea Vehicles: Final Report |
|
Finegold, J.G. | 1977 | Jet Propulsion Laboratories | No. 5030-63 March |
|
|
|
|
|
| Stirling Engines for Underwater Applications, The | Brochure, 4 pg from United Stirling 4-95, 4-275 engines |
|
0 | United Stirling AB, Malmo, Sweden |
|
|
|
Brochure on United Stirling's engines for under- | water submarine use. |
|
| Stirling Engines for Underwater use: Final Report |
|
Finegold, J.C. | 1977 | Jet Propulsion Laboratories March 1977 | #5030-63 |
|
|
|
|
|
| Stirling Engines in traction applications |
|
Neelen, G.T.M.;Kuhlmann,P.;Zacharias, F. | 1971 | C.I.M.A.C. 9th Int. Cong. on Comb. Eng.Stockholm | Paper A26 |
|
|
|
|
|
| Stirling Engines June 1970-1980(Citations from the NTIS | Data Base) |
|
1980 | NTIS | PB80-851702 |
|
|
|
|
|
| Stirling Engines June 1970-June 1980(Citations from the | Engineering Data Base) |
|
1980 | NTIS | PB80-851728 |
|
|
|
|
|
| Stirling Engines June 1974-May 1980(Citations from the | International Aerospace Abstracts Data Base) |
|
1980 | NTIS | PB80-851694 |
|
|
|
|
|
| Stirling Engines Materials Technology |
|
Stephens, J.R. | 1979 | Auto. Tech. Developers Contractors Coordinating | Meeting, Dearborn MI Oct 1979 |
|
|
|
|
|
| Stirling Engines vie for underwater-vehicle jobs |
|
|
1969 | Product Engineering Vol 40 Dec 15, |
|
|
|
|
|
|
| Stirling Engines with a Chemically Reactive working fluid- | Some Thermodynamic Effects | Walker, G.;Metwally M.M. | 1977 | Trans of the ASME Journal of Engineering for power |
|
|
284-87 |
|
|
|
| Stirling Engines with controlled evaporation of a Two-Phase | component working fluid | West, Colin D. | 1983 | Oak Ridge National Laboratory f/DOE | NTIS#DE83017284 |
|
11p | 18th IECEC Conf. Orlando, FL |
|
|
| Stirling Engines. August, 1977-October 1982 (Citations from | the Energy Data Base) Rept for Aut 77-Oct 82 |
|
1983 | NTIS f/DOE | NTIS#PB84856467 |
|
333p | N83-850164 |
|
|
| Stirling Engines. August, 1977-October, 1982 (Citations from | the Energy Data Base). report for Aug 77-Oct 82 |
|
1982 | NTIS f/DOE | NTIS#PB83850164 |
|
333p | supercedes PB80-851710 |
|
|
| Stirling Engines. Can an old failure spell success? |
|
Flint, J. | 1976 | New York Times |
|
|
|
|
|
|
| Stirling Engines. December 1976-April 1990 (A Bibliography | from the Compendex Database) | NTIS | 1990 | NTIS | NTIS#PB90-870353 |
|
115 pg | 038,345 |
|
|
| Stirling Engines. January 1984-June 1989(Citations from the | NTIS Database). Report for Jan 84-Jun 89(273 citations) | NTIS | 1989 | NTIS Springfield VA | NTIS#PB89864169 |
|
149p |
|
|
|
| Stirling Engines. June 1970-1983 (Citations from the NTIS | Data Base) |
|
1983 | National Technical Information Service | NTIS#PB84854470 |
|
|
|
|
|
| Stirling Engines. June 1970-January 1984 (Citations from the | Engineering Index Data Base). Report for Jun 70-Jan 84 |
|
1984 | NTIS f/DOE | NTIS#PB84861566 |
|
|
supercedes PB83-856559 |
|
|
| Stirling Engines. June 1985-December 1989 (Citiations from | the Energy Data Base). Report for Jun 85-dec 90 | NTIS | 1990 | NTIS, Springfield, VA | NTIS#PB90857772 |
|
190p |
|
|
|
| Stirling Engines. June, 1970-1982 (Citations from the | Engineering Index Data Base). Report for Jun 70-dec 82 | NTIS | 1982 | NTIS | NTIS#PB83856559 |
|
190p | supercedes PB80851728 |
|
|
| Stirling Engines. June, 1974-1982 (Citations from the | International Aerospace Abstracts Data Base). Jun 74-Dec 82 | NTIS | 1982 | NTIS | NTIS#PB83856567 |
|
157p | supercedes PB80851694 |
|
|
| Stirling Engines. November 1982-1983 (Citations from the | Energy Data Base). for Nov 82-83. |
|
1983 | NTIS f/DOE | NTIS#PB84856475 |
|
84p |
|
|
|
| Stirling Engines. November 1982-May 1985(Citations from the | Energy Data Base). Report for Nov 82-May 85 | NTIS | 1990 | NTIS, Springfield, VA | NTIS#PB90857764 |
|
147P JAN 90 |
|
|
|
| Stirling Engines: Potential in applications in a marine | environment | Reader, G.T. | 1988 | Inst of Marine Engineers, London |
|
|
|
16 Feb 1988 |
|
|
| Stirling Engines: Their potential use in commercial vehicles | and their impact on fuel utilization | Carlqvist, Stig G.; Lia, T.; Lundhold G | 1975 | Inst. of Mech. Engineers, 1975 |
|
|
35-46 | Proc Conf. Power Plants and Future Fuels, Inst of | Mech Engineers, London, Jan |
|
| Stirling Engines-capabilities and prospects |
|
Daniels, A. | 1973 | Proc. 6th Cryogenics Symp. and Exposition Oct 2-4 |
|
|
190-210 |
|
|
|
| Stirling Engines-more research and development |
|
Urwick, W.D. | 1977 | Model Engineer, Vol 143 Feb 18 |
|
|
220-226 |
|
|
|
| Stirling Engines-Progress toward reality |
|
|
0 | Inst. of Mech. Engrs, Pub.Ltd(London) | ISBN 0-85298-489-8 |
|
|
Mech. Engineers Publication, Northeast Ave. | Bury, St. Edmunds, Suffolk, 1P32 6BW England |
|
| Stirling Engines-The second coming? |
|
Walker, Graham | 1972 | Chartered Mech. Engr, Inst. Mech Eng. London April |
|
|
54-57, |
|
|
|
| Stirling Heat Pumps evaluated |
|
|
1986 | Process Engineering Vol 67, February 1986 |
|
|
25p | diagram |
|
|
| Stirling Hydraulic Artificial Heart Power Source, A |
|
Johnston, R.P.;Bennett, A.;Emigh,S.G. | 1977 | IECEC 12th Conf. Proc. Washington, DC | SAE#779016 |
|
104-111 |
|
|
|
| Stirling Hydraulic Power source for Artificial Hearts |
|
Johnston, R.P.;Baker,L.;Bennet,A. | 1976 | IECEC 11th Conf. Proc. Lake Tahoe, NV |
|
|
|
includes, Martini, W.R. |
|
|
| Stirling Isotope Power System Program |
|
|
1976 | General Electric Company | Doc. GESP-7130 June-Dec |
|
|
|
|
|
| Stirling Isotope Power System Program Final Report |
|
General Electric Company | 1980 | Space Systems Division, General Electric Co. | #805D54251 Dec. 1980 |
|
|
|
|
|
| Stirling Isotope Power System program. Final Report January | 1978-December 1980 |
|
|
DE85002494 |
|
|
|
NTIS518300 |
|
|
| Stirling laboratory research engine: Report on the design | and fabrication | Hoehn, F. | 1978 | Jet Propulsion Laboratory, Pasadena, CA |
|
|
|
|
|
|
| Stirling Machine developments |
|
|
1965 | Engineer, London |
|
|
906-912 |
|
|
|
| Stirling Machine Operating Experience |
|
Ross, Brad; Dudenhoefer, James | 1991 | IECEC 26th Conf. Proceedings Vol.5 |
|
|
278-283 | good summary of Stirling Machine history and use- | age. List type, hours run, power output etc. |
|
| Stirling Machine World | formerly The Stirling Engine Newsletter | Ross, Brad | 0 | Battelle Northwest Laboratories | Richland, Washington |
|
|
|
|
|
| Stirling Machines: Adiabatic to isothermal |
|
|
|
|
DE86005407 |
|
|
642381 |
|
|
| Stirling Machines: Automotive applications may take a back | seat to household chores | O'Connor, Leo | 1992 | Mechanical Engineering Vol 114, June 92 |
|
|
75-9 | Illustrations |
|
|
| Stirling Machines: From Potential to Practicality | Article | Ross, Brad | 1988 | Mechanical Engineering Vol 110 June 1988 |
|
|
pp. 34-42 | Article describes current work on Stirling engines | photographs and drawings |
|
| Stirling Maschinen Grundlagen, Technik Annendung |
|
Wendidi, M. | 1991 | Vkobuch Verlag, Staifen bei Freberg |
|
|
|
|
|
|
| Stirling Materials Development |
|
Stephens, J.R. | 1979 | DOE Highway Vehicle Systems Contractors | Coordination Meeting April 1979 |
|
|
|
|
|
| Stirling Materials Technology Program |
|
Stephens, J.R. | 1978 | DOE Highway Vehicle Systems Contractors | Coordination Meeting May 1978 |
|
|
|
|
|
| Stirling Motor: History-theory-practice |
|
Kolin, Ivo | 1991 | Zagreb University Pub., Ltd, Zagreb, Croatia 1991 |
|
|
|
|
|
|
| Stirling Motorn-realistiskt alternativ fr 80 talets Jordon |
|
Ortegren, L.G. | 1974 | Tecknisk Tidskrijt Vol 104 |
|
|
24-27,40 |
|
|
|
| Stirling Motors with regenerative braking capability |
|
Walker, Graham | 1980 | IECEC 15th Conf. Proc. |
|
|
1987-1992 |
|
|
|
| Stirling Performance |
|
Ross, M. Andrew | 1976 | The Columbus Dispatch Magazine, July 18 |
|
|
|
|
|
|
| Stirling Performance, A. |
|
|
1974 | Time, Sept |
|
|
61 |
|
|
|
| Stirling Power Generation Systems Analysis and Prelimary | Tests. | Selcuk, M.K., | 1977 | Int. Solar Energy Soc. Solar World Conf. June, |
|
|
|
Orlando, FL |
|
|
| Stirling powered Heat Pumps-A worthwhile R&D Project |
|
Olszewski, M. West, Colin D. | 1983 | Oak Ridge National Laboratories | ORNL/PPA-83/3 April 1983 |
|
|
|
|
|
| Stirling powered Sub |
|
Scott, David | 1988 | popular Science, January 88, V232 |
|
|
82 |
|
|
|
| Stirling powered sub |
|
David Scott | 1988 | Popular Science January 88 |
|
|
82-83 |
|
|
|
| Stirling Powered Van Program Overview |
|
|
|
|
N86-19265/5 |
|
|
626935 |
|
|
| Stirling Powered Van Program Overview(revised) |
|
|
|
N86-25303/8 | DE86011386 |
|
|
641177 | 649922 |
|
| Stirling Pump for India |
|
|
1975 | Atom, Sept |
|
|
|
|
|
|
| Stirling Refrigeration Cycle, The | Article | Kohler, J.W.L. | 1965 | Scientific American Vol 212, No.4 |
|
|
pp. 119-127 |
|
|
|
| Stirling Refrigerator for Spacecraft use, A |
|
Walker, Graham | 1987 | 21st IECEC Conf. Phila. August AIAA |
|
|
|
|
|
|
| Stirling Space Engine Program |
|
|
1988 | NASA | NAS3-25463 |
|
|
|
|
|
| Stirling Space Power Demonstrator Engine Test/Analysis | Comparison | Dochat, George R. | 1987 | Acta Astronautica 15(6/7) |
|
|
341-346 |
|
|
|
| Stirling Square 4 for production |
|
|
1978 | Automotive Engineer May 78 |
|
|
|
|
|
|
| Stirling Thermal Engine |
|
|
1960 | SAE Vol 68 |
|
|
665-683 |
|
|
|
| Stirling Thermal Engine Regenerator Cost Reduction Program | Report II-June 1965 Status | Steiner, J.C. | 1965 | General Motors Research Center Publication | NTIS#78N26318 | GMR-2690 |
|
Section 6-004 |
|
|
| Stirling Thermal Engine Regenerator Cost Reduction Program | Report IV-Net Fluid Frict.and Heat Transfer Test Results | Steiner, J.C. | 1967 | General Motors Research Center Publication | NTIS#78N26318 | GMR-2690 |
|
GMR section 6-006 |
|
|
| Stirling total energy systems study | Final Report May 15, 1976-June 13, 1977 | Lehrfeld, Daniel | 1977 | Philips Natuurkundig Laboratorium | DOE \NTIS |
|
|
|
|
|
| Stirling Total-Energy system |
|
Andersen, N.E. | 1979 | Technical Univ of Denmark report | RE79-8 |
|
94p |
|
|
|
| Stirling Traction Motors with regenerative braking capacity |
|
Walker, Graham | 1980 | IECEC\Univ. of California | SAE#809402 |
|
|
|
|
|
| Stirling Trickle Chargers in an Arctic Communications | System | Walker, G. | 1987 | IECEC AIAA | SAE#879415 |
|
pp. 1891- | Discussion of the use of small Free-Piston engines | to power small unattended power units in remote | regions |
| Stirling underwater energy supply systems, The |
|
Brochure(1 pg) | 0 | United Stirling AB, Malmo |
|
|
|
|
|
|
| Stirling, Brayton and Rankine cycles that can be used with | radioisotope heat sources in space power systems.. |
|
1967 | IECEC conf. Proc. | SAE#679064 |
|
|
|
|
|
| Stirling, Near-Ambient temperature refrigerators: Innovative | compact designs | Reader, G.;Walker, G.;Fauvel, R. | 1992 | IECEC 27th Proceedings, Vol. 5\Univ. of Calgary | SAE#929035 |
|
5.93-5.96 |
|
|
|
| Stirling/Hydraulic Power Source for artificial hearts |
|
|
1976 | IECEC 11th Conf. Proc. | SAE#769023 |
|
|
|
|
|
| Stirling-A "Hot" engine for the 80's?., The | Article | Fagenbaum, Joel | 1983 | Mechanical Engineering May 1983 |
|
|
pp. 18-29 | Summary of work being done at this time |
|
|
| Stirling-Beale Engine; Bench-Scale Experiments(Italy) | for Dipt. Fonti Alternative e Risparmio Energetico | Carlini, M.;Conti, M. | 1985 | ENEA, Casaccia (Italy) | NTIS#DE89761950 |
|
70p |
|
|
|
| Stirling-Engine Nodal Analysis Program |
|
Schock, A. | 1978 | Fairchild Space and Electronics Co. May 78 | FSEC-ESD-217-78/127 |
|
|
|
|
|
| Stirling-Hydraulic Drive for small vehicles. A |
|
Beale, W.T. | 1975 | IECEC 10th Conf. Proc. Newark NJ Aug 17-22 | SAE#759143 |
|
958-960 |
|
|
|
| Stirlingmotoren-Miljovennlig, Energibesparende-et | Alternative til dagens diesel-Og Ottomotorer | Lia, T.A. | 1971 | Masken, Norway, Vol 42 |
|
|
23-27 |
|
|
|
| Stirlingmotorn |
|
Veddin, B.A. | 1968 | Nhy Teknik, Vol 2, No 34 |
|
|
16-17 |
|
|
|
| Stirlingmotorn och dess potential i militara system |
|
Ortegren, L.G.;Henriksson,L.;Lia, T | 1971 | Militarteknisk Tidskrift vol 40 |
|
|
5-19 |
|
|
|
| Stirling-Powered Heat Pumps-a worthwhile R and D Project |
|
Olszewski, M.; West, Colin D. | 1983 | Oak Ridge National Laboratory f/DOE | NTIS#DE83010400 | ORNLPPA833 | 49p |
|
|
|
| Stirling's cycle and the Second Law of Thermodynamics |
|
Simon, Raul A. | 1984 | American Journal of Physics Vol 52 June 84 |
|
|
496-499 | bibliography |
|
|
| STM4-120 Kinematic Stirling Engine |
|
Linker, Kevin; Rawlinson,K. S. | 1990 | Sandia National Laboratories | SAND90-0009C (ABSTRACT) |
|
|
|
|
|
| STM4-120 Stirling Engine for Solar Applications, The |
|
Meijer, R.J. | 1988 | 4th Int. Stirling Engine Conference | Paper 041 Tokyo Nov 7-10 1988 |
|
|
|
|
|
| STM4-120 Variable Swashplate Stirling Engine Program update | Paper |
|
1987 |
|
SAE#879031 |
|
|
|
|
|
| STME-120 Stirling Engine Test Development |
|
Godett, T.M.;Meijer, R.J.;Verhey, C.J. | 1989 | SAE Int Congress and Exposition, Feb. 89 | SAE#890149 |
|
|
|
|
|
| Stress and fatigue analysis of the Stirling engine SCP 1-75 | cylinder head. (In Swedish) | Bjoerklund, T.; Fridolfsson, P. | 1989 | Lund University(Sweden) | NTIS#DE90770865 |
|
122p | Spaennings-och utmattninganalys av cylinderhuvudet | till stirlingmotorn |
|
| Structural analysis of a Reflux Pool-Boiler Solar receiver |
|
Hoffman, E.L.; Stone,C.M. | 1991 | Sandia National Labs, June 1991 | SAND91-0862 |
|
|
|
|
|
| Studies for new Hot Air Engine |
|
Havemann, H.A.; Narayan, R.N. | 1955 | Jnl of the Indian Inst of Science Sec B, Vol 37 |
|
|
38,172,224 |
|
|
|
| Studies for new Hot Air Engine |
|
Havemann, H.A.;Narayan, R.N.;Garg, G. | 1959 | Jnl of the Indian Inst of Science Sec B, Vol 38 |
|
|
172-202 |
|
|
|
| Studies for New Hot Air Engine(1955) |
|
Havemann, H.A.; Narayan Rao, N.N. | 1955 | Indian Inst. of Science-Journal Sec. B v37n3 Jul |
|
|
224-91 | thermodynamic aspects of engine cycle advantageous | in burning low grade fuels |
|
| Studies for New Hot Air Engine(1956) |
|
Havemann, H.A.; Narayan Rao, N.N. | 1956 | Indian Inst. of Science-Journal Sec. B v38n3 Jul |
|
|
172-202 | 2 Suplements, Investigation of rate of heat tfr. | to be expected in engine being studied, fund. of | heat exchr oper. with oscillating flow. |
| Studies on internally heated solar Stirling Engine |
|
Isshiki,N.;Watanabe,H.;Shishido,K. | 1988 | 4th Intl. Stirling Engine Conf,(Tokyo) 1988 |
|
|
|
|
|
|
| Studies on Internally Heated Solar Stirling Engine |
|
Isshiki, N.;Watanbe, H.;Shishido, K. | 1988 | 4th Int. Congress on Stirling Engines, tokyo |
|
|
|
|
|
|
| Studies on Nihon Univ.'s Atmospheric Stirling Engine NAS-1 |
|
Watanabe, H. | 1991 | 5th Int. Stirling Engine Conf. (Dubrovnik) |
|
|
|
|
|
|
| Study of Dynamic Energy Equations for Stirling Cycle | Analysis |
|
1983 |
|
NTIS#N8325043/1 |
|
|
|
|
|
| Study of Free-Piston Stirling Engine driven alternators. | Final Report | Nasar, S.A.;Chen, C. | 1987 | Kentucky University f/NASA | NTIS#N88103551 | NASACR-181425 | 52p |
|
|
|
| Study of Gas Spring Heat Transfer in Reciprocating | Cryogenic machinery | Chafe, J.N. | 1988 | MIT Ph D. Thesis |
|
|
|
|
|
|
| Study of low emission vehicle power plants using gaseous | working fluids | Welsh, H.W.; Harp, J.L. | 1972 | Thermo Mechanical Systems, Co., Canoga Park CA |
|
|
|
August |
|
|
| Study of Stirling Cycle Refrigerator |
|
Sung-Tae Kim; Kwan-Shik Cho; W. Chung | 1993 | IECEC Proceedings | SAE#93091 |
|
2.615 |
|
|
|
| Study of the Reciprocating Hot Air Engine |
|
Denham, F.R. | 1953 | PhD Thesis, Durham, University, UK |
|
|
|
|
|
|
| Study of the Reliability of Stirling Engines for Distributed | Receiver Systems | Holtz, R.E. | 1988 | Sandia Labs, NM/Argonne National Lab. IL/DOE | NTIS#DE89006395 Mar 88 | SAND887020 | 71p Nov 88 |
|
|
|
| Study of the response to load variation of a Free-Piston | Stirling Engine | Benvenuto, G.;DeMonte,F.;Farina,F. | 1991 | IECEC 26th Conf. Proceedings | Univ. of Genoa |
|
337-341 |
|
|
|
| Study of Thermal Regenerators subjected to rapid pressure | and flow cycling, A. | Rea, S.N. | 1966 | Ph. D. Thesis, MIT |
|
|
|
|
|
|
| Study of unconventional low-pollution power sources for | Urban Vehicles | HEW | 1969 | HEW/NAPCA, Raleigh, NC October 1969 |
|
|
|
|
|
|
| Study of Unconventional thermal Mechanical and nuclear low | pollution potential power sources for urban vehicles | Hoess,J.A. et.al. | 1969 | Battelle Columbus Labs.,OH, Oct. |
|
|
|
includes Cheaney, E.S.,Trayser, D.A.,Fischer, R., | Timberlake,A.B., |
|
| Study of unconventional thermal, mechanical and nuclear low | pollution-potential power sources for urban vehicles |
|
1969 | Battelle Columbus Labs. OH |
|
|
|
|
|
|
| Study on a 100 W-class Stirling Cycle Cooler-Experimental | Results of Operating Characteristics | Otaka, Toshio; Kazuo Saito | 1993 | IECEC Proceedings, Vol 2 | SAE#93239 |
|
2.621 |
|
|
|
| Study on a 3kW Class Stirling Engine and Its Application | to Heat Pump System | Nomaguchi,T.,Suganami,T. | 1988 | Proc 4th Int Conf on Stirling Engines | Paper 002 Tokyo Nov. 1988 |
|
pp. 7-12 |
|
|
|
| Study on Atmospheric Stirling Engine NAS-1 |
|
Watanabe, H.; Isshiki, N.;Ohtomo, M. | 1992 | IECEC 27th Proceedings\Nihon Univ | SAE#929390 |
|
5.417-5.421 | also K. Watanabe, M. Sagae, M. Hokutoh |
|
|
| Study on external heat system of Stirling Engine |
|
Koseki, H.; Fujiwara, M. | 1988 | 4th Int. Conf. on Stirling Engines |
|
|
303-308 |
|
|
|
| Study on feasibile applications of Stirling Cycle machines | (in Japanese) |
|
1990 | New Energy Devopment Organization, Tokyo, Japan | NTIS#DE91701463 | NEDOP8927 | 504 |
|
|
|
| Study on Internal Combustion Stirling Engine |
|
Isshiki,N.;Moriya,N. | 1986 | 3rd Int Stirling Engine Conf.(Rome) |
|
|
|
|
|
|
| Study on linear elements for Stirling Engine Regenerators | Paper |
|
1987 |
|
SAE#879218 |
|
|
|
|
|
| Study on Low NOx Combustor |
|
Yamaguro,A. | 1988 | 4th Int. Stirling Engine Conference. Nov. 88 | Paper No. 53 |
|
|
|
|
|
| Study on Stirling Engine Combustor |
|
Koseki, H.;Fujiwara, M.;Sigimoto, T. | 1992 | IECEC 27th proceedings\ Mitsubishi Electric Corp. | SAE#929402 |
|
5.467-5.476 |
|
|
|
| Submarine power systems using the V4-275R Stirling Engine |
|
Nilsson, H. | 1988 | Proc. of the Inst. of Mechanical Engineers part A | Power and Process Engineering v202 noA4 |
|
257-267 | bibliography, illustrations |
|
|
| Substitutes for Steam |
|
Babcock, George H. | 1885 | American Society of Mechanical Engineers, Vol. 7 | 1885-1887 |
|
680-710 | Paper discussing the history of various other | sources of power and engines. |
|
| Summary of Federally Funded Stirling Engine Research |
|
|
1983 | Argonne National Laboratories f/DOE | NTIS#DE83015648 | ANLCT832 | 110p |
|
|
|
| Summary of Simulation models for Stirling and Vuilleumier | Cycle Machines and Characteristic analyses | Terada, Fusao; Sekiya, Hiroshi | 1992 | IECEC 27th Proceedings\Sanyo Electric\MITI | SAE#929031 |
|
5.69-5.74 |
|
|
|
| Summary of the NASA Lewis component technology program for | Stirling power converters | Thieme, Lanny G.,Swec, Diane | 1993 | NASA Lewis Research Center | NASA TM 93-15526 ,TM-105640 |
|
|
|
|
|
| Sun-Mill, The |
|
Ikuta, K, Fujiwara S. | 1980 | Japanese Journal of Applied Physics 19, n 6 | June 1980 |
|
pp/ 1173-1176 |
|
|
|
| Sunpower Prospers with a variety Projects |
|
|
1981 | Stirling Newletter, Nov 1981 |
|
|
16 |
|
|
|
| SUNPULSE-description |
|
www.tiac.net/users/pcag/solar/sp.htm | 1999 | Solar powered low temp machine with flat plate regenerator ab |
|
|
|
|
|
|
| Supercharged and Water Injected Stirling Engine |
|
Farber, E.A. | 1969 | ASME meeting Nov 16, 1969/Univ of Fla Gainsville | ASME#69-WA/Sol-3 |
|
1-6 | Shows simple checkvalve design to allow the engine | to supercharge itself during below atmospheric pre | ssure cycle, device can be used to draw in water |
| Supporting Research and Technology for Automotive Stirling | Engine Development |
|
1980 | NASA | DOE/NASA/1040-80/13 |
|
|
|
|
|
| Sur des documents relatifs a la machine a air chaud du | Capitaine Ericsson | Combes, Par M. | 1853 | Annals des Mines, Vol 3 |
|
|
|
|
|
|
| Survey of European Technology Developments of SO/sub X//NO | sub X/Flue Gas clean up for Coal Fired Boilers... |
|
1980 | Galaxy Inc, Washington DC f/DOE | NTIS#DE82008005 | DOESF10538T12V1 | 104p | Survey of European Technology Development of SO/ | sub X//NOsub X/Flue Gas clean up for coal fired | boilers, also Free-Piston SE and Coal Tar Diesels |
| Survey of Oscillating Flow in Stirling Engine Heat Exchanger | (Annual) Contractor Report | Simon, T.W.;Seume, J.R. | 1988 | Univ. of Minnesota f/NASA Washington DC | NTIS#N88223227 | NASACR-182108 | 133p Mar 88 |
|
|
|
| Survey of Oscillating flow in Stirling Engine Heat Exchanger | Yearly Progress Report prepared for NASA Lewis | Seume, J.R.;Simon, T.W. | 1986 | Univ. of Minn., Heat Transfer Laboratory/NASA |
|
|
|
NASA grant NAG3-598 |
|
|
| Survey on the highly efficient energy utilization by the | application of Energy Saving Technology(in Japanese) | Japan Machinery Foundation | 1986 | Japan Machinery Foundation, Japan | NTIS#DE88770153 |
|
138p Jul 86 |
|
|
|
| Svsnsk Stirlingmotor i Produktion 1976 |
|
Ortegren, L.G. | 1971 | Teknisk Tidskrift Vol 101 |
|
|
44-50 |
|
|
|
| Swash Plate Hot Air Engine |
|
de Bene, A.N. | 1975 | Model Engineer, vol 141 Sept 19 |
|
|
905 |
|
|
|
| Swedish Stirling Engine Development, The |
|
|
1977 | Kommanditbolaget, United Stirling | BI 16.3000 12.76 |
|
|
|
|
|
| Synthesis of three parameter mechanisms of the Rhombic Drive | of a Stirling Engine | Biryukov, V.I. | 1975 | Izu Vyssh Uchevn Zaved Masinostr | No. 11 |
|
70-76 |
|
|
|
| System Design and Performance Prediction of a Free Piston | Stirling Eng./Magnetic Coupling Comp. for Gas Res. Heat Pump | Chen, G.,;Beale, W.T. | 1989 | Sunpower Inc,/ASME Winter Meeting 10-15 Dec. 1989 | NTIS#DE89016070 |
|
18p |
|
|
|
| System Design and performance prediction of a Free-Piston | Stirling Engine/Magnetic Coupling Compressor Assembly... |
|
1989 |
|
NTIS#DE89016070 |
|
|
024,050 |
|
|
| System Performance of a Stirling Engine powered by a | heat activated heat pump |
|
1979 | IECEC 14th Conf. Proc. | SAE#799359 |
|
|
|
|
|
| System Safety in Stirling Engine Development |
|
Bankaitis, H. | 1981 | NASA Lewis Research Center for/DOE | NTIS#DOENASA5104025 | NASA TM-82615 | 30p |
|
|
|
| System Safety in Stirling Engine Development |
|
|
1981 |
|
NTIS#N81-24994/8 |
|
|
|
|
|
| TAPPER, A Hybrid Stirling Engine |
|
Senft, J.R. | 1982 | Engineering in Miniature, Vol 4, no. 4,5,6 | Oct, Nov 1982 |
|
|
|
|
|
| Technical Accomplishment of NASA Lewis Center, 1990 | Annual Report |
|
1990 | NASA Lewis Research Center | NTIS#N90242207 | NASATM-102296 |
|
|
|
|
| Technical and Economic Study of Stirling and Rankine Cycle | bottoming systems for Heavy Truck Diesel Engines |
|
1987 |
|
NTIS#N8728470/9 |
|
|
756,676 |
|
|
| Technical and Economical Potential of Dish-Stirling | Systems | Schiel, W.;Keck, T. | 1992 | 6th Internation Symposium on Solar Thermal Concentrating Tech | Mojacar |
|
|
|
|
|
| Technical Demonstrator Engine (TDE) Period Test Report, | Aug 1979-May 1981 | Moynihan, T.; Rauch, J. | 1981 | Mechanical Technology Inc f/DOE | NTIS#DE83002272 | MTI112901 | 151p |
|
|
|
| Technical Handout |
|
General Motors | 1969 | General Motors Research Center |
|
|
|
|
|
|
| Terrestrial Radioisotope fueled kilowatt power systems |
|
|
1968 | IECEC Conference Proceedings | SAE#679079 |
|
|
|
|
|
| Test driving GM's Hybrid Electric Car | a Stirling Engine and an electric motor, working together | Jim Dunne | 1968 | Popular Science | December issue |
|
pp. 117-119 | Description of test drive made by Dunn on early | Stirling powered car |
|
| Test on a 4 U-tube Heat Operated Heat Engine |
|
Martini, William R. | 1983 | IECEC 18th, Conf. Proc. Orlando, Aug. | SAE#839142 |
|
|
|
|
|
| Test Report of Two Fluid Piston Heat Engines |
|
Cutler, D., Hanke, C. | 1979 | Chicago Bridge and Iron Co. | CBI Research Contract R-0268 |
|
|
|
|
|
| Test Results and Description of a 1 Kw Free-Piston Stirling | Engine with a Dashpot Load | Schreiber, J. | 1983 | NASA Lewis Research Center f/DOE | NTIS#DE83013343 | NASATM-83407 | 21p | N83-27346/6 |
|
|
| Test results and description of a 1kW Free-Piston Stirling | Engine with a dashpot load |
|
1983 | SAE | SAE#839145 |
|
|
|
|
|
| Test Results and Facility Description for a 40 Kw Stirling | Engine | Blubaugh, A.L.; Carriker, J.W. | 1981 | NASA Lewis Research Center f/DOE | NTIS#DE82004034 | NASATM-82620 | 47p | DOENASA5104027 |
|
|
| Test Results for a Laboratory Version of a 10 Watt Free- | Piston Stiling/Linear Alternator Generator Set | Ritter, Darren C.; Brad A. Ross | 1993 | IECEC 28th Proceedings Vol 2 | SAE#93444 |
|
2.663 |
|
|
|
| Test results from a Full Scale Sodium Reflux Pool Boiler | Receiver (Sandia Labs) | Moreno, J.B.;Andraka, C.E. | 1990 | ASME Int Solar Energy Conf. Miami, FL 1-4 Aug 1990 | NTIS#DE90003577 | SAND98-2772C | 8p | 12th Conf. |
|
|
| Test results of a 40KW Stirling Engine and comparison with | the NASA Lewis computer code predictions | Allen, D.J.;Cairelli, J.E. | 1985 | IECEC 25th Conf. Proc\NASA Lewis Research Center | SAE#859139 |
|
|
|
|
|
| Test results of high efficiency Stirling Machine components |
|
Rifkin, Vincent, Benson, G. M. | 1982 | IECEC 17th Conf. Proceedings | SAE#829313 |
|
|
|
|
|
| Testing and Performance Characteristics of a 1 Kw Free- | Piston Stirling Engine |
|
1983 |
|
NTIS#N8325036/5 |
|
|
|
|
|
| Testing of a Stirling Cycle Cooler |
|
Chen, F.C.; Keshock, E.G.;Murphy, R.W. | 1988 | ASME Winter Annual Meeting | ASME-Vol 8. Analysis and application Heat Pumps |
|
49-55 |
|
|
|
| Testing of a Variable Stroke Stirling Engine at NASA Lewis |
|
|
1986 |
|
SAE#869104 |
|
|
|
|
|
| Testing of a variable Stroke Stirling Engine. Final Report |
|
Thieme, L.G.;Allen, D.J. | 1986 | IECEC 21st Conf. Proc. SAE/IEEE/NASA Lewis, Aug. | NTIS#N88304720 | NASATM-100899 | 31p 1986 |
|
|
|
| Testing of advanced ceramic fabric heat pipe for a Stirling | Engine | Antoniak,Z.J.;Webb, B.J. | 1991 | Battelle Pacific Northwest Laboratories f/DOE | NTIS#DE92000142 | PNLSA19728 | 14 |
|
|
|
| Testing of the STM4-120 Kinematic Stirling Engine for Solar | Thermal Electric Systems | Linker, Kevin L.; Adkins, Douglas R. | 1989 | IECEC 24th Conf. Proc. Washington DC/Sandia Labs | SAE#899048 NTIS#DE89013933 |
|
12p | Bench tests of engine at Sandia's Engine Test | facility (ETF) |
|
| Tests on a 4-V-Tub Heat Operated heat Pump |
|
Martini, W.R. | 1983 | IECEC 18th Conf. Proceedings August |
|
|
|
|
|
|
| Tests on a displacer type Stirling Engine using internal | combustion | Otten, E.H. | 1956 | Shell Thorton Report | Report K140 |
|
|
|
|
|
| The 4-95 Stirling Engine for Underwater vehicle applications |
|
Bratt, C. | 1990 | IECEC 25th Conf. Proc. Vol 5 |
|
|
|
|
|
|
| The application of non-linear state space stability | analyses to Free-Piston Stirling Cycle Engine design |
|
1983 | SAE | SAE#839123 |
|
|
|
|
|
| The Caloric Ship Ericsson and of her Trial Excursion, | articles, Descriptive of | Daily Journals of City of New York | 1853 | Gideon & Co., Washington | Duke #38704 |
|
|
Small book of about 55 pages containing the news- | paper accounts of the Ericsson's Ship Trials |
|
| The combination of a Stirling Engine with a remotely placed | heat source |
|
1974 | IECEC | SAE#749051 |
|
|
|
|
|
| The combined molten salt thermal storage and sodium heat | pipes for the ECA Stirling Engine |
|
0 | SAE | SAE#839129 |
|
|
|
|
|
| The concept of critical length ratio in heat exchangers for | Stirling Cycle Machines |
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759151 |
|
|
|
|
|
| The concept of Irreversibility in Heat Exchanger Design | Counterflow Heat Exchangers for Gas to Gas applications | Bejan, A | 1977 | Transactions ASME Vol 99 |
|
|
|
August 1977 |
|
|
| The Construction of the Philips Air Engine |
|
Van Weenen, F.L. | 1947 | philips Technical Review IX, No.4, 1947 |
|
|
125-134 | landmark article in which philips announced their | modern engine |
|
| The CPG 5-kW Disk Stirlinng Development Program |
|
Bean, J.R.;Diver, R.B. | 1992 | IECEC 27th Proceedings\Cummins Power Generation | SAE#929181 |
|
5.221-5.228 | Sandia National Labs. |
|
|
| The design and initial testing of a prototype Stirling | Cycle Heat Pump | Rix, D.H. | 1988 | Mechanical Engineering Science v202 noC6 | Proc. of the Inst. of Mech Engrs part C |
|
431-438 | bibliography |
|
|
| The Development of a low vibration, long life pulse tube | employing flexural bearings | Olsen, Daniel;Riggle, Peter;Gedeon, D. | 1992 | IECEC 27th Proceedings\Bell Aerosystems\STC | SAE#929174 |
|
5.167-5.172 |
|
|
|
| The Development of a Vuilleumier Cycle Heat Pump |
|
Okamoto, I. | 1991 | IECEC 26th Conf. Proc. Vol 2 |
|
|
516 |
|
|
|
| The Effect of Bottom End Temp. on the Performance of Stirlin |
|
Reader, G.T.; Barnes, C. | 1988 | IECEC conference, Denver, Colo. |
|
|
|
|
|
|
| The effect of component efficiency and operating conditions | on the 50 kW dish Stirling system in Riyadh. | Noyes, Gerold W. | 1990 | journal of solar Energy Engineering vol 112 No 4 |
|
|
244-246 | bibliography |
|
|
| The effectiveness of the periodic flow heat exchanger |
|
Williamson, J.M. | 1959 | English Electric | Report No. W/M(4b) |
|
|
|
|
|
| The effects of component efficiency and operating conditions | on the 50 KW Dish Stirling system in Riyadh, Saudia Arabia | Noyes, Gerold W. | 1990 | Jour. of Solar Energy Engineering | Vol 112 Nov. 90 |
|
|
|
|
|
| The effects of Heat Transfer on Gas Spring Performance |
|
Kornhauser, A.A. | 1991 | IECEC 26th Conf. Proc. Vol 5 | American Nuclear Society |
|
180-185 | Journal of Energy Resources Technology, V115, | p70-75, March 1993 |
|
| The efficiency of reversible heat engines: the possible | misinterpretation of a corollary to Carnot's theorem | Michalik, Thomas R., Kurt Seidman | 1991 | Journal of Chemical Education, Vol 68 No.3 |
|
|
208 |
|
|
|
| The engine of the 1980's-Stirling's Mr Clean images lie | behind Ford-Philips deal | Ludvigsen, K. | 1972 | Ward's Auto World Sept |
|
|
41-45 |
|
|
|
| The First and the Second Law Analysis of Stirling Cycle | Cryocooler | Peiyi, W.;Yalin, H. | 1989 | Int.Symp Therm. Anal and Improvement of Energy Sys | Beijing, June 5-8, 1989 |
|
336-342 |
|
|
|
| The Free-Displacer, Free-Piston Stirling Engine--potential | energy conserver |
|
1975 | IECEC 10th Conf. Proc. Newark NJ | SAE#759149 |
|
|
|
|
|
| The Fundamental Thermofluids of a Stirling Engine Type Re- | generator Operating at Constant Volume | Kentfield, J.A.C. | 1993 | Proc. 6th Int. Stirling Engine Conf. Eindhoven | Paper 1.4 |
|
|
|
|
|
| The GLIMPS simulation code applied to the V160 DMA Stirling | cogeneration unit | Lista, Paolo, | 1993 | IECEC 28th Conf. Proceedings/Univ. of Roma | SAE#93012 |
|
2.683 | Univ of Roma, "La Sapienza", Dipartmento de | Meccanica e Aeronautica, Via Eudossiana, 1800184 | Roma, Italy |
| The Importance of Anchoring Cylinder Wall Temperature in | Stirling Cryocoolers | Wang, A.C.;Smith, J.L. Jr. | 1990 | IECEC 25th Conf. Proceedings Vol 5 |
|
|
386-391 |
|
|
|
| The Inverted Yoke Drive Stirling Engine |
|
Ross, A. | 1985 | IECEC 20th Conf. Proceedings, Miami |
|
|
3.224-3.230 | Describes C-60 Engine |
|
|
| The Little Engine that might |
|
Garrison, Peter | 1996 | Flying, March 1996 issue |
|
|
101-103 | discusses the possibility of a Stirling Powered | aircraft |
|
| The Martini Weiss simulation code applied to the V160 DMA | Stirling cogeneration unit | Lista, Paolo | 1993 | University of Rome | SAE#93013 |
|
2.695 | Univ. Roma, Dipartimento di Mecanica e Aeronautica | Via Eudossiana, 1800184, roma, italy |
|
| The Next Great Thing: The Sun, the Stirling Engine and the | Drive to Change the World | Shelton, Mark | 1994 | W.W. NORTON, NY, 1994 |
|
|
272p | Review in Library Journal March 15,'94 | Review in Publishers Weekly 2/28/94V241 N9 pg 65 | ODU #TJ812.5s541994 |
| The Onset of Oscillations in a Lossless Fluidyne |
|
Geisow, A.D. | 1976 | AERE-M2840 October 1976 |
|
|
|
|
|
|
| The Philips Hot Gas Engine withh Rhombic drive Mechanism |
|
Meijer, R.J. | 1959 | Philips Technical Review XX, No. 9 |
|
|
245-276 |
|
|
|
| The Philips Stirling Engine |
|
Hargreaves, C.M. | 1991 | Eisevier, Amersterdam |
|
|
|
Very complete coverage of Philips activities |
|
|
| The Philips Stirling Engine brough up to date | Video Tape | FFV (Sweden) | 1982 | FFV |
|
|
|
explains how a Stirling rhombic drive works. | from Brad Ross |
|
| The Philips Stirling Engine, a study of its efficiency as a | function of operation temperatures and working fluids | Michels, A.P.J. | 1976 | IECEC 11th Proceed\Philips Labs, Briarcliff, NY | SAE#769258 |
|
|
|
|
|
| The Potential of the Stirling Cycle Heat Pump |
|
Rix, D.H. | 1989 | Proc. of the Inst. of Mech Eng. Part A Vol 203 #4 |
|
|
245-54 | diagrams |
|
|
| The power Formula for Atmospheric Stirling Engines |
|
Kolin, Ivo; Lista, Paolo;Naso, Vincenzo | 1992 | IECEC 27th Proceedings\Univ of Zagreb\Univ of Rome | SAE#929027 |
|
5.41-5.46 |
|
|
|
| The production of liquid nitrogen from atmospheric air | using a gas refrigerating machine | van der Ster | 1960 | Delft Technische Hoschshule, Thesis |
|
|
|
|
|
|
| The pumping ring as a Stirling Engine rod seal |
|
|
0 | SAE | SAE#839131 |
|
|
|
|
|
| The Reversed Stirling Cycle-A Comparison of Theory and Test | Results | Lundqvist, P. | 1991 | 18th Int. Cong. of Refrigeration, '91 Montreal |
|
|
561-565 |
|
|
|
| The Role of Stirling Engines in Power systems |
|
Belding, J. | 1978 | Inst Gas Tech Seminar Stirling Cycle Prime Movers |
|
|
|
Chicago, Ill |
|
|
| The SEAM1 simulation code applied to the V160DMA Stirling | Cogeneration unit and Comparison with competitors | Lista, Paolo | 1993 | IECEC Conf. Atlanta, 1993 | SAE#93014 |
|
2.707 | Univ. of Roma, Dimartimento di Meccanica and u | Aeronautica. |
|
| The Set Up of the Stirling Cogeneration System V160 DMA |
|
Lista, P. | 1992 | First Stirling Engine Forum, Osnabruck, Germany |
|
|
|
Europaische Stirling Forum '92,Osnabruck,Germany |
|
|
| The setup of the Stirling cogeneration system VF160 DMA |
|
Lista, Paola | 1992 | Europaisches Stirling Forum 92, Osnabruck Germany |
|
|
|
March 1992 Forum |
|
|
| The Stirling Cycle with nuclear fuel |
|
Kolin, Ivo | 1968 | Nuclear Engineering Int. Dec 68 |
|
|
1027-1034 |
|
|
|
| The Stirling Cycle, An Alternative for Cooling Machines |
|
Kushnir, M.; Manor, E. | 1990 | Int. Conf. onCFC and Halon Alternatives, Nov. 1990 |
|
|
|
|
|
|
| The Stirling Engine for Unerwater Vehicle Applications |
|
Mattavi, J.N. | 1969 | SAE | SAE#690731 |
|
|
|
|
|
| The Stirling Engine-engineering considerations in view of | future needs | Pedroso, R.I. | 1976 | IECEC 11th Conf. Proc.\Florida Int. University | SAE#769257 |
|
|
|
|
|
| The Stirling refrigeration Cycle as an Alternative to Vapor | Compression systems using CFC and HCFC working fluids | Vitale, N. | 1992 | ASME winter Annual Meeting |
|
|
|
|
|
|
| The Stirling: Ford's engine for the eighties |
|
Ludvigsen, K. | 1972 | Motor, Sept 9 |
|
|
|
|
|
|
| The Sun-Our Future Energy Source |
|
McDaniels, D.K. | 1984 | John Wiley & Sons, Inc |
|
|
|
|
|
|
| The supporting technologies and sea trials of a long range | autonomous civilian submarine(SAGA 1) | Sauzade, Dider; Imbert, Guy;Mollard,Jean | 1991 | Marine Technology Society Journal | Vol 25 Summer 91 |
|
3-13 | bibliography |
|
|
| The Thermodynamics of Stirling Engines Revisted: The | Relative merits of Hot Zone or Cold Zone work extraction | Kentfield, J.A.C. | 1992 | IECEC 27th Proceedings\Univ of Calgary | SAE#929026 |
|
5.33-5.40 |
|
|
|
| The Use of bulk coefficients of convective heat transfer in | the simulation of the practical Stirling Cycle by computer | Organ, A.J. | 1977 | King's College, Univ. of London, Research Report |
|
|
|
|
|
|
| The use of dummy rhombic drives for Marine Stirling Engines |
|
Reader, G.T. | 1981 | IECEC 16th Conf. Proc. | SAE#819788?89 |
|
|
|
|
|
| The V160 DMA Cogeneration Unit, VHS videocassette |
|
Lista, P.;Naso, V | 1993 | . | Ref. fax +39.6.4881759 |
|
|
|
|
|
| The V160 DMA Stirling Cogeneration Unit: thhe Italian | Opportunity | Lista, P. | 1992 | Journal of Solar Energy, 1/2 Vol. 1992 |
|
|
|
|
|
|
| The V4-275R Stirling Engine in underwater application |
|
|
|
|
SAE#869134 |
|
|
|
|
|
| The Water Supply of Country Buildings |
|
Gerhard, William P. | 1905 | Cassiers Magazine, Vol VXXVIII No. 5 |
|
|
|
|
|
|
| The wire mesh regenerator of the Stirling cycle machine. |
|
OPrgan, A.J. | 1993 | under review |
|
|
|
|
|
|
| Theore de Geschlossen Calerischen Maschine Laubroy und | Schwatskopff in Berlin | Schmidt, G. | 1861 | Z. ver Oster Ing. |
|
|
79 |
|
|
|
| Theore de Lehmannschen Calorischen Maschine |
|
Schmidt, G. | 1871 | Z. Verb dt Ing. vol 14 No. 1 |
|
|
|
|
|
|
| Theoretical analysis and experimental investigation of the | Stirling Cycle with emphasis on the systems as a heat pump | Scaringe, R.P. | 1978 | Ph.D. Thesis, Rensselaer Polytechnic Inst., NY |
|
|
|
March |
|
|
| Theoretical Analysis and Performance Investigation of | Stirling Cycle Regenerators | Atrey, M.D.; Bapat, S.L. | 1991 | Cryogenics, Dec 91 Vol 31 |
|
|
1044-52 |
|
|
|
| Theoretical and Experimental Performance of the Beale Free | Piston Stirling Engine |
|
1973 | IECEC 8th Conf. Proc. Philidelphia PA Aug 13-17 | SAE#739034 IECEC583 |
|
|
|
|
|
| Theoretical and Experimental Studies on Stirling Engine |
|
Yamashita, I. | 1983 | Mech Eng. laboratory | Report No. 128 |
|
4-12 |
|
|
|
| Theoretical basis for the Beale Number |
|
West, C.D. | 1980 | IECEC 16th Proceedings, Atlanta, GA August 1981 | SAE#819793 |
|
|
|
|
|
| Theoretical Experimentation research on Free-Piston Stirling | Engines |
|
1988 |
|
NTIS#DE88751893 |
|
|
835,539 |
|
|
| Theoretical Performance of Stirling Cycle Engines, The |
|
Walker, Graham;Khan, M. | 1965 | SAE Int Auto. Eng. Congress, Detroit MI Jan | SAE#949A |
|
7p | Continues his work in this area from earlier | paper. Computer aided study on design parameters | on performance showing effects of parameters |
| Theorie der Geschlossenen Calorischen Maschine von Laubroy | und Schwartzkopff in Berlin |
|
1861 | Zeitschrift des Vereines Deutscher Ingenieure V5 |
|
|
79 | Ing. |
|
|
| Theorie der Geschlossenen Maschine |
|
|
1871 | Zeitschrift des Vereines Deutscher Ingenieure V 15 |
|
|
|
Jan-Feb. 1871 |
|
|
| Theorie der Lehman'schen calorischen Machine |
|
Schmidt,G. | 1871 | Zeitschrift des vereines Deutcher Ingenieure v15 | No.1 Jan 1871 p1-12,Part 2, Feb 1871 p98-112 |
|
|
|
|
|
| Theory of air cycles with special reference to the | Stirling Cycle | Finkelstein, Theodore | 1952 | Ph.D. Thesis, Univ of London |
|
|
|
|
|
|
| Thermal Analysis of conceptual designs for Gphs/Fpse power | systems of 250 We and 500 We: Final Report | Mccomas, T.J.;Dugan, E.T. | 1991 | Florida University, Gainsville f/NASA | NTIS#N91246736/NASA-126187145 | NASACR-187145 |
|
|
|
|
| Thermal and Elastohydrodynamic Analysis of reciprocating rod | seals in the Stirling engine |
|
1983 | SAE | SAE#839132 |
|
|
|
|
|
| Thermal Charaterization of the BAe 80° Stirling Cycle | Cooler | Burt, W.; Orsini, R. | 1991 | Adv Cryogenic Engineering Vol 37B |
|
|
|
|
|
|
| Thermal design of Stirling Cycle Machines |
|
Creswick, F.A. | 1965 | SAE Meeting 11-15 1965 | SAE#949C |
|
10p | Thermal design is approached by analysis of heat | and mass flow based on ideal isothermal Schmidt | cycle. |
| Thermal Design of Stirling Cycle Machines |
|
Crestwick, F.A. | 1957 | SAE Paper, Detroit, MI | SAE#949C |
|
|
|
|
|
| Thermal Energy storage systems for pollutant free operation | of automobiles (in German) | Balkan, S. | 1975 | VDI Zeitshrift, Vol 117 |
|
|
422-429 |
|
|
|
| Thermal Energy Storage |
|
Schroeder, J. | 1973 | Univ of Ljubljana, Neth., (Philips Eindhoven) |
|
|
|
|
|
|
| Thermal Energy Storage and Control |
|
Schroeder, J. | 1975 | Journal Eng Industry(ASME) |
|
|
893-896 |
|
|
|
| Thermal Energy Storage for a Space Solar Dynamic | Power System |
|
1985 | IECEC | SAE#859057 |
|
|
|
|
|
| Thermal Energy Storage for the Stirling Engine Powered | Automobile. Final Report | Morgan, D.T. | 1980 | Argonne National Laboratories, March 79 | ANL-K-784135-1 | NASACR-159561 |
|
|
|
|
| Thermal Energy Storage for the Stirling Engine powered | Automobile |
|
1981 |
|
NTIS#N81-22467/7 |
|
|
|
|
|
| Thermal Energy Storage system for a Stirling powered | Highway Automobile | Waters,, E.D.;Saaski,E.W.;Martini, W.R. | 1979 | IECEC 14th Conf. Proc. |
|
|
425-480 |
|
|
|
| Thermal Energy storage unit based on lithium fluoride |
|
Asselman, G.A.A. | 1977 | IECEC 11th Conf. Proc. Lake Tahoe, NV Sept 12-17 |
|
|
|
|
|
|
| Thermal Energy Storage/Heat Engine for Highway vehicle | Propulsion | Folsum, L.R.; Artiles, A.A.; Joyce, J.P. | 1977 | ERDA-HVSCCM 4-6 Oct 77; Dearborn MI |
|
|
30p |
|
|
|
| Thermal Oscillators |
|
Benson, Glendon M. | 1977 | Lawrence Livermore Laboratory Notes 1959 | SAE#779247 check number |
|
1478 | from thhe Free-Piston Stirling Engine Advanced | Development Notes, Lawrence Livermore Laboratory | 1959 |
| Thermal Oscillators |
|
Benson, Glendon M. | 1973 | IECEC 8th Conf. Proc. Philidelphia, PA | SAE#739076 |
|
182-189 |
|
|
|
| Thermal Oscillators |
|
|
1977 | IECEC 12th Conf. Proc. Washington, DC |
|
|
1478-1487 |
|
|
|
| Thermal Power Sources for extended UUV Mission requirements |
|
Hawley, J.G.;Potter, I,J.;Reader, G.T. | 1991 | Undersea World 91 San Diego CA |
|
|
|
|
|
|
| Thermal Vehicle-A pollution free concept, A. |
|
Kettler, J.R. | 1975 | IECEC 10th Conf. Proc. NewArk, NJ |
|
|
548-553 |
|
|
|
| Thermally Activated Stirling Cryocooler |
|
Walker, Graham. | 1982 | Butterworths scientific Publishers, Guildford,Surr | Proc. 9th Int. Cryo. Eng. Conf. Kobe, Japan |
|
|
|
|
|
| Thermo Electron conceptual design study of thermal energy | storage for a Stirling car | Morgan, D. | 1978 | DOE Hwy Veh. Syst. Cont. Coord Mtg, Troy MI, May |
|
|
|
|
|
|
| Thermoacoustic systems, Stirling Engines and Pulse | Refrigerators | Benvenuto, Giovanni, Giacomo, Bisio | 1989 | IECEC 24th Conf. Proc. | SAE#899046 |
|
2413-2418 | Univ. of Genoa, Italy, Dipartimento di Energetica |
|
|
| Thermocompressor and artificial heart power |
|
Martini, W.R.;Riggle, P.; Noble, J.E. | 1968 | MDAC Paper | MDAC paer WD-10 |
|
|
|
|
|
| Thermocompressor powered artificial heart assist system |
|
Moise, J.C.;Faeser, R.J. | 1975 | IECEC 11th Conf. Proc | SAE#759183 |
|
|
title also listed in 1977 IECEC Record p112-118 |
|
|
| Thermocompressor powered artificial heart assist system |
|
|
1976 | IECEC 11th Conf. Proc. | SAE#769024 |
|
|
|
|
|
| Thermocompressors, Vuilleumier and Solvay Machines |
|
Finkelstein, T. | 1970 | IECEC 5th Conf. Proc. Las Vegas, NV Sept 20-25 | SAE#709025 |
|
220-228 |
|
|
|
| Thermodynamic analysis of Stirling Cycle and comparison | with experiment | Kirkley, D.W. | 1965 | SAE meeting 11-15 Jan 65 | SAE#949B |
|
11p | Results of theoretical and actual engine | performance are compared. |
|
| Thermodynamic analysis of Stirling Engines |
|
Finklestein, Theodore | 1967 | Journal of Spacecraft and Rockets vol 4 n9 Sept 67 |
|
|
1184-9 | Discusses equations of heat transfer and energy | transformation |
|
| Thermodynamic analysis of the Stirling Cycle Machine-A | Review of Literature | Organ, A.J. | 1987 | Proc. Institution of Mech. Engineers vol 201 no.C6 |
|
|
381-402 |
|
|
|
| Thermodynamic Aspects of Stirling Engines with two phase, | tow component working fluids | Walker, Graham; Agbi, B. | 1973 | Trans. Canadian Soc. Mech. Engrs. Vol 2 No. 1 |
|
|
1-8 |
|
|
|
| Thermodynamic Atlas, A |
|
Kolin, Ivo | 1967 | Longmans and Co., London\Univ of Zagreb |
|
|
|
and 1982 |
|
|
| Thermodynamic Cycle of the Minto Solar Wheel, The |
|
Lin, S. | 1981 | ASHRAE | paper no. 2583 |
|
pp 408-419 |
|
|
|
| Thermodynamic description of an adiabatic second order | analysis for Stirling Engines | Lee, K., Krepchin, I.P.,Toscano, W.M. | 1981 | IECEC 16th Proceeding | SAE#819794 check number |
|
|
|
|
|
| Thermodynamic Design of Stirling Cycle Machines |
|
Organ, A.J. | 1987 | Proc. of Inst. of Mech. Engrs |
|
|
|
Cambridge University Press 1992 |
|
|
| Thermodynamic investigation of the working cycle of the | Philips Machine | Karavansky, I.I.;Meltser, I.Z. | 1958 | Proc. 10 Int. Cong. on Refrigeration |
|
|
3-29,209 |
|
|
|
| Thermodynamic Loss at Component Interfaces in Stirling | Cycles | Smith, J.L.;Romm, M. | 1992 | IECEC 27th Conf. Proceedings | SAE#929468 IECEC 27th Proceedings\MIT |
|
|
5.529-5.532 |
|
|
| Thermodynamic Modeling of Ringbom Stirling Engines |
|
Argues, Ph. | 1993 | IECEC 28th Conf. Proceeding | SAE#93095 |
|
2.713 | Ecole Centrale 69131 Ecully, France |
|
|
| Thermodynamic working fluids for Stirling Cycle Thermal | Machines | Moscrip, W.M. | 1983 | U.S. Patent Office | 4413475 |
|
|
|
|
|
| Thermodynamics and Gas dynamics of the Stirling Cycle | Machine | Organ, Allan J. | 1992 | Cambridge[England] University Press, NY |
|
|
415 p. | ODU |
|
|
| Thermodynamics of Piston Engines for Space Applications |
|
Vernte-Lozet, M. | 1967 | Gordon and Breach Science Publishers Inc, New York |
|
|
|
|
|
|
| Thermoelectrodynamic Oscillating Piston System | Invention disclosure(unpublished) | Finkelstein, Theodore | 1963 | October |
|
|
|
|
|
|
| Thermo-Mechanical Generator |
|
|
1974 | Engineering, London, vol 214 Sept 4 |
|
|
|
|
|
|
| Thermo-Mechanical Generator for an efficient means of | converting heat to electricity at low power levels, The | Cooke-Yarborough, E.H.; Franklin, E. | 1974 | Proc Inst. Electrical Engineers, Vol 7, |
|
|
749-751 |
|
|
|
| Thermo-Mechanical Generator: a proposal for a Heat powered | non rotary electric alternator | Cooke-Yarborough, E.H. | 1967 | Harwell Atomic Energy Research Establishment | Harwell Memorandum #1881\AERE-M1881 |
|
|
|
|
|
| Thermomechanical Generator:an efficient means of converting | heat to electricity at low power levels. The | Cook-Yarborough, E.H.;Howlett,R.; West,C | 1974 | IEE Vol 121 no. 7 July 74 | SAE# |
|
749-751 | have a reference that lists E. Franklin and | J. Geison as authors |
|
| Thermophysics of Regenerative Energy Conversion |
|
Finkelstein, Theodore | 1967 | AIAA Paper | Paper No. 67-216 |
|
|
Aerospace Science Notes 1967 |
|
|
| Theroetische Untersuchungen un konstruktive Vorschlage fur | die Realisierung einer Vuilleumier-Warmepumpe | Richter, N. | 0 | Address:Reihe 19, Nr. 29, VDI Verlag, | Postfach 8228, 4000 Dusseldorf 1, W. Germany |
|
|
|
|
|
| Thesis |
|
Ward G.L. | 1972 | University of Bath |
|
|
|
|
|
|
| Thesis |
|
Bell, C. | 1979 | Univ. of Witwatersrand,SA |
|
|
|
|
|
|
| Thesis |
|
Kirkley, D.W. | 1963 | University of Durham, UK | Ph. D. Thesis |
|
|
|
|
|
| Things to come |
|
|
|
Popular Mechanics |
|
|
32 | under the section-"All Outdoors", a description | of the Winnebago with a Stirling genset |
|
| To develop a design process for a Rhombic Drive Stirling | Cycle Machine | Honey,J.P. | 1978 | Royal Navy Engineering College | Report of May 1978 |
|
|
|
|
|
| Total energy technology alternative studies |
|
Marciniak, T.J.;Bratis, J.C.;Davis, A. | 1978 | Argonne National Laboratories Report | NTIS |
|
|
|
|
|
| Towards cleaner air-A passenger coach powered by a Philips | Stirling Engine. Information sheet | Meijer, R.J. | 1971 | Philips Research Labs, Eindhoven |
|
|
|
|
|
|
| Tradeoff between Magnet Volume and Tuning Capacitor in a | Free-Piston Stirling Engine Power Generation System | Nasar, S,.A.;Fu, Z.X.;Rosswurm, Maaark | 1992 | IECEC 27th Pproceedings\Univ. of Kentucky | SAE#929262 |
|
5.295-5.302 | and Cummins Electronics |
|
|
| Transient Liquid Phase Bonding for Stirling Engine | Application | Mittendorf, D.L.; Baggenstoss, W.G. | 1990 | IECEC 25th Conf. Proc.? |
|
|
|
Allied Signal Aerospace, Garrett fluid Sys | Tempe, AZ |
|
| Transient Liquid Phase Diffusion Bonding of Udimet 720 | for Stirling Power Converter applications | Mittendorf, Donald;Baggenstoss, William | 1992 | IECEC 27th Proceedings\Allied-Signal Aerospace Inc | SAE#929385 |
|
5.393-5.397 |
|
|
|
| Transition of Oscillatory flow in Tubes: An Empirical | Modell for Application to Stirling Engines | Simon, T.;Ibrahim, M.;Johnson, T. | 1992 | IECEC 27th Proceedings\Univ of Minn. | SAE#929463 |
|
5.495-5.502 |
|
|
|
| Trends in Dish Stirling Solar Receiver Design |
|
Diver,R.B.;Andraka, C.E.;Moreno,J.B. | 1990 | IECEC 25th Conf. Proceedings vol 5 | SAE#905303 | NTIS#DE90011507 | 310- | Sandia Labs. | 90-5-303 |
|
| Triple Expansion Stirling Cycle Refrigerator |
|
Daniels, A.; DuPre, F.K. | 1971 | Advances in Cryogenic Engineering Vol 16 |
|
|
178-184 |
|
|
|
| Triple Expansion Stirling Refrigerator |
|
Daniels, A.; DuPre, F.K. | 1971 | Advances in Cryogencis Vol 16, Plenum Pub. Corp 71 |
|
|
|
|
|
|
| Tuning Line Excitation of Displacer Motion in a Fluidyne |
|
Fauvel, O.R.; Reader, G. Walker G | 1989 | IECEC 24th Conf. Proc. 1989\Univ. of Calgary | SAE#899060 |
|
2271 |
|
|
|
| Twenty-First Automotive Tech. Development Contractors | Coordination Meeting Proceedings |
|
|
|
DE85000072 |
|
|
NTIS538605 |
|
|
| Two Dimensional Numerical Simulation of a Stirling Engine | Heat Exchanger (NASA report) | Ibrahim, M.B.;Tew, Roy C. | 1989 | IECEC 24th Conf. Proc. | NTIS#N89238232 |
|
13p |
|
|
|
| Two Stage Compressor with rolling diaphragm seals, a |
|
ver Beek, H.J. | 1969 | Philips Technical Review, No 30 |
|
|
51-54 |
|
|
|
| Two Tiered Design Analysis of a Radiator for a Solar Dynamic | Powered Stirling Engine. Final Report (NASA) | Hainley, D.C.; Sverdrup Tech, Cleveland | 1989 | IECEC 24th Conf. Proc. Washington DC | NTIS#N89260319 |
|
9p |
|
|
|
| Two Years Orbital Performance Summary of Stirling Cycle | Mechanical Refrigerators | Naes, L.G.;Nast, T.C. | 1981 | SPIE Proceedings, San Diego Vol.304 1981 |
|
|
95 |
|
|
|
| Two-dimensional Numerical simulation of a Stirling Engine | Heat Exchanger | Ibrahim, M.B.;Tew, R.C | 1989 | IECEC 24th Conf. Proc. Washington, DC | SAE#899536 |
|
|
|
|
|
| Two-Phase, Two Component Stirling Engine with Controlled | Evaporation | West, Colin D. | 1982 | IECEC 18th Conf. Proc. Vol 2\Oak Ridge Nat. lab. | NTIS#DE83005172 | ORNLTM8524 | 19p | f/DOE |
|
|
| Typical Phenomena of the Stirling Cycle as encountered in a | Numerical Approach | Fokker, H.;van Eekelen, J.A | 1978 | IECEC 13th Conf. Proceedings San. Diego, CA | SAE#789113 |
|
1746-1752 |
|
|
|
| U.K. Consortium Stirling Engine-Regenerator effectiveness | and heater performance | Rice, G., Jones, J.D., Thonger, J. | 1983 | Reading University, Reading, Berkshire, England | SAE#839113 |
|
|
|
|
|
| Uber die Theorie des Warmeaustausches in Regeneratoren |
|
Hausen, H. | 1929 | Z. angew Math ;Mech, Vol 9 |
|
|
173-200 |
|
|
|
| Uber Kreisprozessc Zwishchen Zwei Isothermen |
|
Reitlinger, J. | 1876 | Zeit. des Ost. Ing. U. Arch. Ver. |
|
|
|
|
|
|
| Ueber Neuerungen an Luft-und Gasmachinen(Innovations of gas | machines) | Slaby, A. | 1880 | Dingler's Plt. Jnl Bd. 236 H.1 |
|
|
|
|
|
|
| UK Consortium Stirling Engine Program |
|
Rice, Graham | 1982 | IECEC 17th Conf. Proc. | SAE#829304 |
|
|
|
|
|
| Umwandlung von Sonnenenergie in mechanische Engergie durch | den Stirling-Motor(convers. of solar energy into mech. ener | Dekitsch, A.;Fritzsche, A. | 1978 | Dornier System GmbH, Friedrichshafen(Germ FR) | NTIS#TIBB9080039 |
|
111p | discusses Free-Piston generators, engine and | thermal loading factors, working temperatures | how user loading must be considered |
| Unconventional Powerplants |
|
Vickers, P.T. | 1970 | Proc. Air Pollution Control Assoc. conf. Harrisbrg |
|
|
|
|
|
|
| Unconventional Stirling Engines for the Artificial Heart | Application | Martini, W.R.;Emigh,S.G.;White, M.A. | 1974 | IECEC 9th Conf. Proc. San Francisco, CA | SAE#749117 |
|
|
|
|
|
| Unconventional thermal mechanical and nuclear low pollution | potential power sources for urban vehicles | Hoess, J.A.; Stahman, R.C. | 1969 | IECEC 4th Conf. Proc. Washington, DC, Sept 21-26 |
|
|
|
|
|
|
| Understanding Stirling Engines |
|
|
|
|
PB-104353 |
|
|
606341 |
|
|
| Underwater applications of the Stirling Engines |
|
Reader, G.T.;Barnes,O. | 1988 | 4th Int. Stirling Engine Conf. |
|
|
|
|
|
|
| Underwater Heat Engine Technology |
|
Reader, Graham T.;hawley, J. Gary | 1992 | Sea Technology, V33, July 92 |
|
|
15-17 | Diagrams |
|
|
| Underwater Power Systems and using the Stirling Cycle | Machine | Reader, Graham T. | 1991 |
|
|
|
|
|
|
|
| Unique requirements of the cooperation of computation and | design in the development of Stirling Engines | Zacharias, F.A. | 1973 | Von Karman Inst. for Fluid Dynamics, Lecture 53 |
|
|
|
Feb 12-16 |
|
|
| United States Depart. of Energy Solar Receiver Technology | Development | Klimas, P.C. | 1990 | Sandia National Laboratory | NTIS#DE91012653 | SAND900934C | 27 |
|
|
|
| United Stirling flat out for production |
|
|
1978 | Engineer, January 5, 1978 |
|
|
|
|
|
|
| United Stirling's P40 Engine--Three years experience of | testing, evaluation and improvements | Rosenqvist,K.; Haland, Y. | 1980 | 5th annual Automotive Propulsion Systems Symposium |
|
|
25p | 5th Annual symposium, 14-18 April |
|
|
| United Stirling-Stirling air cycle engine status |
|
|
1973 | NATO Brussels, Belgium |
|
|
|
|
|
|
| Up to date information on the NS30S Stirling Engine |
|
Kubo,Isoroku; Mamoru | 1988 | SAE | SAE#889352 |
|
|
|
|
|
| Update of results of SPRE testing at NASA Lewis Research | Center | Cairelli, J.E.;Swec, D.M. | 1991 | IECEC 26th Conf. Proc./NASA Lewis Research Center | SAE#910182 NTIS#N91272088 | NASATM-104425 | 217-222 |
|
|
|
| Update on results of SPRE Testing at NASA Lewis Research |
|
Cairelli, J.E. | 1990 | IECEC 25th Conf. Proc. Vol.5 | SAE#900504 |
|
237-244 |
|
|
|
| Update on the Advanced Stirling Conversion System Project | for 25kW Dish Applications | Shaltens, Richard K.;Schreiber, Jeffery | 1992 | IECEC 27th Proceedings\NASA Lewis Research Center | SAE#929184 |
|
5.229-5.235 | Wayne Wong also |
|
|
| Update on the development of Heat Pipe Solar Receiver for | Stirling/Dish Electric systems | Adkins, D.R.;Godett, T.M. | 1991 | Sandia Laboratories f/DOE/13th Int Solar Eng. Conf | NTIS#91004568 | SAND893042C |
|
|
|
|
| Update: Alloys for Stirling Engines | C | Cronin, Michael J. | 1985 | Metal Progress, Vol 127 February 85 |
|
|
39-41 | illustrated, bibliography |
|
|
| Updated Preliminary Design Review |
|
Cummins Engine Company | 1989 | Review held at NASA Lewis Research Center |
|
|
|
April 2-3, 1989 |
|
|
| Updates: Alloys for Stirling engines |
|
Cronin, Micheal J.; Skog, Erik | 1985 | Metal Progress v127 Feb 85 |
|
|
39-41 |
|
|
|
| Use of Radioisotope Decay Energy to power Stirling Engines | for undersea applications |
|
1968 | IECEC conference Proceedings | SAE#689115 |
|
|
|
|
|
| Use of Solar Heat as a Mechanical Motor-Power, The |
|
Ericsson, John | 1868 | University of Lund, (Sweden) |
|
|
|
He received an honorary doctorate for this paper |
|
|
| Use of Stirling Cycle Machines as Prime Movers, Refriger- | ation machines and Heat Pumps in Military Applications |
|
1968 | IECEC Conference Proceedings | SAE#689135 |
|
|
|
|
|
| User Friendly, Graphics Oriented, Martini Stirling Engine | Simulation Program | Weiss, M.H.;Fauvel, O.R.; | 1986 | 3rd Int Stirling Engine Conf. vol 1 |
|
|
|
|
|
|
| User Oriented Design System for Stirling Cycle Codes, a. |
|
Heames, T.J., Daley, J.G., Uherka, D.J. | 1982 | IECEC 17th Proceedings | SAE#829278 |
|
|
|
|
|
| Utilization of Exhaust Gases from a Diesel Engine for oper- | ating Stirling Engines | Bak, F.; Monrad, K. | 1987 | Jydsk teknologisk Inst.,Aarhu(Denmark) | NTIS#DE88752831 |
|
121p Sep 87 |
|
|
|
| Utilization of LH2 and LNG cold for generation of electric | power by a Cryogenic type Stirling Engine | Oshima, K.;Ishizaki,Y.;Kamiyama, S. | 1978 | Cryogenics, Nov 78 |
|
|
617-620 |
|
|
|
| V160 Stirling Engine Program Update |
|
Johansson, Lennart et al | 1988 | SAE Int. Congress and Exposition, Feb 29-Mar 4,88 | SAE#880542 |
|
|
|
|
|
| Vacuum brazing of complex heat exchangers for the Stirling | Engine | Neelen, G.T.M. | 1970 | Welding Journal, vol 49 May |
|
|
381-386 |
|
|
|
| Validation of published Stirling Engine design methods | using engine characteristics from the literature | Martini, William R. | 1980 | IECEC\Martini Engineering | SAE#809449 |
|
|
|
|
|
| Validation of Second Order Stirling Engine Prediction | Programs by means of data from a Philips Air Charged Engine | Taylor, D.R.; Clarke, M.A. | 1982 | IECEC Record |
|
|
|
|
|
|
| Validation of thermodynamic and mechanical models of Free | Piston Stirling Engines | Carlini, M.;Cichy,M.;Mancini,M. | 1985 | IECEC 20th Conf. Proc. Miami, Aug. |
|
|
|
|
|
|
| Vanguard 1 Solar Parabolic Dish Stirling Module development | and test results | Washom, B.J. | 1986 | IECEC 19th Conf. Proc. | SAE#849516 |
|
|
San Francisco |
|
|
| Vanguard I Solar Parabolic Dish-Stirling Engine Module | Final Report, May 1982-Sept. 1984 | Washom, R.J. | 1984 | Advanco Corp. Sept. 30. 1984 for DOE | DOE/AL/16333-2 |
|
|
|
|
|
| Vanguard I solar Parabolic Dish-Stirling Engine Module Final | Report, May 28, 1982-September 30, 1984 | Washom, B. | 1984 | DOE | DOE-AL-16333-2(84-ADV-5) |
|
|
|
|
|
| Variable Displacement Stirling Engine for automotive | propulsion., A | Meijer, R.J.; Michels, A.P.J. | 1978 | IECEC 13th Conf. Proc. San Diego, CA |
|
|
|
|
|
|
| Verallgemeinerte thermodynamicsche Deschreibung regenerative | Gaskreisprozesse. | kuhl, H.D. | 1990 | University of dortmund, Dissertation |
|
|
|
|
|
|
| Vervollstandigte Berechnung des Warmeaustauches in | Regeneratoren | Hausen, H. | 1942 | Z. Ver. Dt. Ing. Beiheft Verfahrenstechnik No. 2 |
|
|
31 |
|
|
|
| Vibration characterization and control of Miniature Stirling | Cycle Cryocoolers for Space Applications | Ross, R.G.;Johnson, D.L. | 1991 | Advances in Cryogenic Engineering vol 37B |
|
|
|
|
|
|
| Visualization of Entry Flow sepaaration for oscillating | flow in tubes | Simon, T.;Qui, S. | 1992 | IECEC 27th Proceedings\Univ. of Minn. | SAE#929466 |
|
5.517-5.521 |
|
|
|
| VM Cycle heat Pump continues at Philips |
|
Martini, W.R. | 1980 | Stirling Engine Newsletter August 1980 |
|
|
6 |
|
|
|
| Vuilleumier Cycle cryogenic refrigerator and development |
|
Magee, F.N.; Doering, R.D. | 1968 |
|
AFFDL-TR-68-67 |
|
|
|
|
|
| Vuilleumier-cycle cryogenic refrigeration |
|
White, R. | 1976 |
|
AFFDL-TR-76-17, April |
|
|
|
|
|
| Wally Minto's Wonder Wheel |
|
Lindsley, E.F. | 1976 | Popular Science, Sept 1976 208 n.3 |
|
|
pg 79 |
|
|
|
| Warmeaustauch in Regeneratoren |
|
Hausen, H. | 1929 | VDI Zeitschrift, Vol 73 |
|
|
|
|
|
|
| Water as a lubricant for Stirling Air Engines: Design | considerations and operating experience | Fauvel, O.R.,Walker, G., Srinivasan, V. | 1983 | IECEC 18th Proceedings, Orlando, FL | SAE#839134 |
|
928- |
|
|
|
| Water Pumping with Stirling Engines |
|
West, C.D. |
|
|
|
|
|
|
|
|
| Weaving in the sun | Article | staff | 1984 | Popular Mechanics |
|
|
|
|
|
|
| Weiterentwicklungen am Stirlingmotor |
|
Zacharias, F. | 1977 | Motortechnische Zeitschrift Vol 38 |
|
|
371-377 |
|
|
|
| Whence Stirling Engines |
|
Martini, W.R. | 1982 | IECEC 17th Conf. Proceedings | SAE#829276 check number |
|
1669 |
|
|
|
| Where Philips stands on the Stirling Engine |
|
van Beukering, H.C.J. | 1973 | Auto. Eng. vol 81 |
|
|
37-43 |
|
|
|
| Which Auto Engine Next? |
|
Janicki, E. | 1976 | Auto. Engineer,Vol 1. |
|
|
|
|
|
|
| Which Automobile Engines in the future |
|
Sternlich, B. | 1974 | ASME, New York |
|
|
|
|
|
|
| Whispering Engine |
|
Arthur, J. | 1965 | Popular Mechanics, Jan |
|
|
118-129, 210 |
|
|
|
| Whither Stirling Engines |
|
|
1982 |
|
SAE#829276 |
|
|
|
|
|
| Will the old Hot Air Engine drive the new cars? | Article | Armagnac, Alden P. | 1948 | Popular Science, February 1948 |
|
|
pp. 145-149 |
|
|
|
| Wood Fired Air Charged Ross-Stirling 3 kW Power System |
|
Atkins, Ernest, E.,Ellison, W.;Zylsra,S. | 0 | General Pneumatics Western Research Cen. |
|
|
|
Performed by Gen. Pneu. Western Research Center | in Scottsdale, AZ |
|
| On Means of realizing Advantages of the Air Engines |
|
Rankin, C.E., Macquorn, W.J. | 1854 | Proceedings of the Franklin Institute | Vol 55, 1855 |
|
68-69 | Discusses fuel consumption of steam versus air | engines, Two other articles in this series, pg 247 | -249,333-339, next volumes |
| future Auto Engines, competition heats up |
|
Rain, Carl | 1982 | High Technology | May\June 1982 |
|
39-47 | Discusses the various power cycles of automotive | engines |
|
| The 2nd Stirling Techno Ralley: Construction of Model and | Manned Stirling Engine Cars | Isshiki, Naotsugu; Matsu, Mashahiro | 1999 | IECEC 28th Conf. Proc. Aug 99 | SAEWEB#1999-01-2503 |
|
|
Tokyo University |
|
|
| Proposed and Basic Experiments of a Super Stirling Engine |
|
Isshiki, Naotsugu, Isshiki, Seita | 1999 | IECEC 28th Cnf. Proc., Aug 99 Vancouver | SAEWeb#1999-01-2502 |
|
|
tokyo Inst. of Technology |
|
|
| Evaluation of Six different correlations from the flow | friction factor of Stirling Engine Regenerators | Thomas, Bernard | 1999 | 0IECEC 28th Conf. Proceedings, | SAEWeb#1999-01-2456 |
|
|
Reitlingen University |
|
|
| Afterburning Ericsson Cycle Engine |
|
Proeschel, Richard A. | 1999 | IECEC 28th Conf. Proc. Future Transportation Conf. |
|
|
|
|
|
|
| Diaphram Stirling Engine |
|
|
1999 | SAEWeb#1999-01-2457 |
|
|
|
|
|
|
| Technology Development for a Stirling Radioisotope Power | Source for Deep Space Mission | Theime,L.,White, M., Songgang,Q | 1999 | IECEC 28th Conf. Proceedings, Vancouver Aug 99 | SAEWeb#1999-01-2454 |
|
|
|
|
|
| Optimized Design of Stirling Driven Variable Compression | System | Kagaw, Noboru | 1999 | IECEC 28th Conference Proceedings, VancouverAug 99 |
|
|
|
|
|
|
| Acoustic Stirling Heat Engine |
|
Backus, Scott; Swift, Greg | 1999 | Los Alamos National Laboratory |
|
|
|
condensed Matter and Thermal Physics Group. Los | Alamos, NM |
|
| Abstracts on Stirling Engines | Martini Memorial Volume | Undseth, K. |
|
University of Calgary, Dept. of Mech. Engineering |
|
|
|
|
|
|
| Design and Modeling of a 150 Kw Stirling Engine |
|
Rice, G.,Fulford, D.J. | 1999 | Univeristy of Reading |
|
|
|
Modeling in VB and Excel |
|
|
| Consultances on Stirling Engines |
|
Rice, G., Fulford, D.J. | 1999 | University of Reading |
|
|
|
|
|
|
| Stirling Engine Heat Exchangers |
|
|
1993 | 6th Int Stirling Engine Conf. Netherlands, 1993 |
|
|
|
|
|
|
| Modern World of Stirling Engines |
|
Ross, B. A. | 1995 | Stirling Machine World |
|
|
|
|
|
|
| Stirling Engine Design and Feasibility for Automotive use |
|
Collie, M.J. | 1979 | Energy Technology reviewNo. 47, 1979 |
|
|
|
|
|
|
| The Next Great Thing: The Sun, the Stirling Engine and the | drive to change the world | Shelton, Mark L. | 1994 | Norton |
|
|
|
|
|
|
| Thermodynamics and Gas Dynamics of the Stirling Machine |
|
Organ, A.J. | 1993 | Cambridge Press |
|
|
|
|
|
|
| Measuring Reversing Flow Pressure in Stirling Engine Heat | Exchangers |
|
1984 | Sunpower\NASA Lewis |
|
|
|
|
|
|
| Stirling Engine Manual |
|
Rizzo, James G. |
|
|
|
|
|
|
|
|
| Rev. Robert Stirling D.D. |
|
Seir, Robert |
|
|
|
|
|
|
|
|
| The Evolution of the Heat Engines |
|
Kolin, Ivo |
|
|
|
|
|
|
|
|
| Theroacoustics: A unifying perspective for some engines and | refrigeration | Swift, Greg | 1999 | Los Alamos National Laboratory |
|
|
|
|
|
|
| Status of Free Piston Stirling engines driven heat pumps | Development issures and options | Little, Arthur,.Inc | 1986 | Oak Ridge National Laboratories |
|
|
|
|
|
|